Top Carbon Steel Bending Tube

Tubing Bender Pipe Bender Hvac tools - Tube Bender Kit with Reverse Bending 1/4 to 7/8 Inch Used in Hydraulic Systems Automobile and Refrigerator maintenance Hvac work

  • Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY. Suitable Tube Size: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the....
  • Made of 40CR steel and 45# steel. Suitable for bending annealed metal materials or PVC pipes, such as thin-walled steel pipes (thickness.
  • With pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Application: automobile maintenance, refrigerator maintenance, Hvac work, hydraulic system, etc..
  • Package Include: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Deburring Tool x 1, Carrying....
Check Stock

3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System

  • 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
  • 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
  • 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
  • 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
  • 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

Hurricane Sheet Metal Tool, Sheet Metal Folding Tool, Sheet Metal Bending Tool for HVAC, 12 Inch Folding Tool for Bending and Forming Metal

  • 【Sheet Metal Folding Tool】Hurricane 12" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
  • 【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
  • 【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
  • 【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
  • 【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Metal Wood oscillating Multitool 6 Pcs Quick Release Saw Blades QTH062, Universal Desing, Compatible with Black & Decker, dewalt, makita, ryob,and Skill Bosch.

  • 6PC contains 4 different kinds of blades, for cutting wood, plastic, and metal. each type of saw blade is designed for different purposes..
  • Made of alloy steel and high carbon steel, our oscillating multitool blades are manufactured with special techniques and thick gauge metals due to which it becomes durable for a long period..
  • Universal deisign, the blades are compatible with most tools..
  • Set contains: 1pc 87mm 3-1/2" semicircle saw blades, 2pc 35mm carbon steel saw blade (serration), 2pc 35mm carbon steel saw blade (Japan's tooth), 1pc 65mm carbon steel bending shovel.
Check Stock

4LifetimeLines 25' 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, Inverted Flare

  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed.
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions.
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
  • We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly.
  • Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.
Check Stock

RIDGID 36117 403 Instrument Bender, 3/16-inch Tube Bender for Bends Up to 180 Degrees, Pipe Bender,Black/Silver,Small

  • Designed for bending annealed copper, steel and stainless with a wall thickness less than or equal to 0.06 inches (1.5 mm) to a maximum of 180 degrees.
  • Made with offset cushion grip handles for improved comfort when forming 180-degree bends.
  • A 90-degree start angle and unique oil-absorbing shoe minimizes bending effort while forming accurate bends.
  • Features measurements in both inches and millimeters.
  • Tube bender has a 3/16-inch tube size outside diameter capacity and 5/8-inch bend radius.
Check Stock