Top Carbon Steel Casing Pipe

SIMOND STORE Hand Crank Blacksmithing Forge Blower, 8 Inch Casing, Cast Aluminum Manual Blower for Farrier Blacksmith Coal Forge Firepot BBQ Outdoor Cooking Camping

  • Material: The blower casing and impellers (like fan blades) are made of cast aluminium, handle, pipe and stand are made of heavy duty steel..
  • Size: Its casing measure 8" and air outlet 2". It has gear ratio of 1:28..
  • Easy Maintenance: Two Oil Ports are provided for lubrication to enable smooth and noise free operation..
  • Easy Set Up: Its set up is very simple. You simply have to put together blower, pipe, handle and stand together and further it can be mounted on the ground or table for more stability..
  • Applications: It’s an wonderful tool for indoor or outdoor uses. Works great for fireplaces, fire pits, BBQ, camping, indoor and outdoor fireplaces, outdoor or picnic cooking, chimney, or other camping & hiking activities..
Check Stock

Scotte Stainless Steel Reamer Tool 6 Blade Tobacco Pipe Carbon Scraper

  • Tobacco pipe reamer tool,carbon dioxide cleaner/carbon scraper.
  • Adopt import high quality stainless steel, very upscale atmosphere, show aristocratic temperament.
  • Bit pass needle design, can clean pipe, can change part of flue, very practical.
  • Can be fine-tuned to control the thickness of retained carbon pie.
  • Thicken design, material, strong and durable, beautiful and generous, ideal choice.
Check Stock

KUNTEC Tailpipe Cutter 3/4-Inch to 3-Inch Exhaust Pipe Cutter Tool with 15 Blades

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Exhaust pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

KUNTEC Exhaust and Tailpipe Cutter for Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • This tailpipe cutter is designed for both on and off the car cutting of tailpipes and exhaust pipes with diameters of 3/4 to 3 inches (19-76mm).
  • The Exhaust pipe cutter features 15 blades, there is a cutting wheel on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting.
  • Chain pipe cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable.
  • The rubber handle is good thickness and non-slip, easy to operate.
  • Cuts pipe up to 3mm thick. It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc.
Check Stock

Simond Store Hand Crank Blacksmithing Forge Blower,11 Inch Cast Aluminum Casing, Heavy Duty Manual Forge Blower for Farrier Blacksmith Coal Forge Firepot BBQ Outdoor Cooking Camping

  • Material: The blower casing and impellers (like fan blades) are made of cast aluminium, handle, pipe and stand are made of heavy duty steel..
  • Size: Its casing measure 11" and 1-1/4" BSP outlet. It has gear ratio of 1:28..
  • Easy Maintenance: Two Oil Ports are provided for lubrication to enable smooth and noise free operation..
  • Easy Set Up: Its set up is very simple. You simply have to put together blower, pipe, handle and stand together and further it can be mounted on the ground or table for more stability..
  • Applications: It’s an wonderful tool for indoor or outdoor uses. Works great for fireplaces, fire pits, BBQ, camping, indoor and outdoor fireplaces, outdoor or picnic cooking, chimney, or other camping & hiking activities..
Check Stock

YG-1 - J0283 J0 Series Vanadium Alloy HSS Spiral Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 8-32 Thread Size, H3 Tolerance

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Pipe Reamer Tool [Plumbers Efficient Helper] Deburring Tool 1/4 to 5/8 Inner/Outer for Copper PVC Pipe Cleaner Stainless Steel Tubing and Pipe Reamer

  • 【Efficient Deburring】Plumber is here! This pipe reamer tool makes smooth work of cleaning up the ends of copper and plastic pipe for better....
  • 【Excellent Grip】This pipe deburring tool has a metal casing that does not deform easily during operation like plastic, which enhances safety, and....
  • 【Deburring Tool for Copper Pipe】There are 4 solid stainless steel reamers inner and outter, enough to deal with PVC pipes and copper pipes, and....
  • 【Small Diameter Friendly】This pvc pipe reamer tool adapts to pipes in the OD and ID range of 1/4" to 5/8", so you can apply it to narrow pipes..
  • 【Portable Debur Tool】2" diameter & 2.36" height, it won't take up too much space in the toolbox, easy to carry. With a good painting process, the....
Check Stock

Tobacco, Pipes, and Race in Colonial Virginia: Little Tubes of Mighty Power

  • ...lls for mounting or installing pole lights next to your shed. Use them to attach pipes to floor joists and stop the knock when the washing machine starts, or use them to screw light bars onto decks. Light colors work well for decorative pipe stands. For PPR PVC iron pipe or copper pipe.
  • ✈ High Quality Safety Metal Carbon Steel: These U-shaped bracket tubes are made of black carbon steel, it is highly resistant to corrosion and rust, it can withstand different weather conditions and even strong wind. Resists thermal expansion and contraction. Suitable for indoor and outdoor use. Robust construction. High hardness. Strong bearing capacity, not easy to deform..
Check Stock

Hilitchi Fuel Line Petrol Clip Pipe Pliers 9 Inch Fuel Filter Calipers Fuel Line Pliers and 80 Degree Disconnect Pliers Push Pin Pliers Set (Pack of 3)

  • ✅[QUALITY MATERIAL] Our fuel line pliers are made of quality carbon steel, high strength and with PVC handle, it makes you feel more comfortable and no hand fatigue during operation. Maximum opening approx 85mm/3.35inches. Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • ✅[QUICK DISCONNECT PLIERS] Featuring with black oxidation treatment, this disconnect pliers is made of high strength carbon steel and with durable spring, it surely will ensure a smooth operation experience for you. Low-profile design with 80 degree bend allows the tool to fit between the top of the fuel tank and vehicle..
  • ✅[9” PLIERS] Fuel filter caliper also made of carbon steel, featuring with a flexible spring, you could make it to the appropriate opening you want. Maximum opening approx: 32mm/1.26in. Also, they universally fit for all automobiles, suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.
  • ✅[NICELY-PACKED PACKAGE] This fuel line pliers kit includes a hose pipe clamp, 80 degree disconnect pliers and 9 inch fuel filter calipers. Nice and neatly packed. All of the pliers are packed in a quality leather zipper bag. Elastic straps sewn ....
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...ase interceptor, whose flow rate is about 4 GPM (15.14 LPM). The interior space is divided into three different filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it....
Check Stock

3 Inlet NETAMI Carbon Fiber Stainless steel Exhaust Tip 3 Inlet Purple 3 Inlet/4 Outlet

  • Made of High quality stainless steel with carbon Fiber finished.
  • Real Glossy Carbon Fiber with UV protection will never Fade or Rust.
  • Come with a Custom Clamp, fits 3" stock pipe.
  • Please measure your factory pipe before place the order.
Check Stock

Tailpipe Cutter, Exhaust and Tailpipe Cutter Apply to Cut Pipes 3/4-Inch to 3-Inch in Diameter

  • APPLICATION:Use tools to cut pipes with diameters of 3/4 to 3 inches..
  • CARBON STEEL:Exhaust Pipe Cutter is made of high quality carbon steel, strong, sturdy, not easy to damage and extremely durable..
  • ANTI-SLIP:The handle is good thickness and non-slip, easy to operate..
  • GOOD PERFORMANCE:Tools work well in areas that are hard to reach.Double wall tube will not be cut..
  • EASY TO USE:The fifteen blades effectively cut the pipe, so complete cutting takes only 1/4 circles..
Check Stock