Top Carbon Steel Fasteners

HolsterSmith Sheath and Holster Making - Thermoform Basic Combo Kit

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear.....
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and....
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a....
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product....
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts #8-32 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (50)

  • C1010 High-Welding Quality, Low Carbon Steel, C1010 High-Welding Quality, Low Carbon Steel.
  • Compare to Buckeye Fasteners SKU: ND 3324.
  • Compare to Paulin Industries Part #: 08-3324.
Check Stock

Knife Blanks DM2719 7 Overall Damascus Drop Point Hunter Knife Blade

  • Carbon Steel Knive Blade Blank for making knifes. Full-Tang Blade Blanks with screws.
  • Knife Making Kit: Full Tang Blank Knife and 3 screws. DIY knife set. Durable and robust high carbon steel 1066 knife blank.
  • Tempered Hardened to 57-59 HRC True Scandi grind. Blade has Jimping on the spine.
  • Knifemaker kit includes 3 screws(Knife Handle Fasteners M2.5 Inner Hexagon Screw).
  • Dimensions: Total length 8 1/2 inches, Blade length 4 inches, Blade thickness 0.11 inches.
Check Stock

IRWIN Bolt Extractor Set for Lug Nuts Impact Rated 1859146

  • IMPACT performance series bits are designed specifically for impact drivers and the higher torque they produce..
  • Reverse spiral flutes grip harder as resistance increases for maximum grip power. Deep Well fits over studs to remove even recessed broken fasteners..
  • Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion and increases life of....
  • Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter..
Check Stock

DURATECH Super-Thin Open End Wrench Set, SAE, 8-Piece, Including 1/4\

  • 【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
  • 【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
  • 【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 1/4"x9/32.
Check Stock

POWERTEC QWS1005#8 x 3/4” Wood Screw Set, Phillips Flat Head Deep Thread Screws - 100 Pack

  • INCLUDES: #8 x 3/4 Deep Thread Wood Screws (100 pack).
  • FUNCTION: These flat heads are primarily used in applications where the head of the fastener must sit flush with the mating surface, connecting wood to wood, attaching hinges or as wood fasteners hardware for wood projects.
  • FEATURES: A short screw construction, with a fine deep cut Philips drive to help minimize bit slippage, stripping or damage to your screw.
  • PREMIUM: These deep thread wood screws are made with durable carbon steel, and finished with a smooth zinc plated coating for added corrosion protection.
  • SPECIFICATIONS: Diameter: #8 | Length: 3/4” | Head Style: Flat | Thread Type: Deep Coarse | Quantity: 100 pcs | Material: Carbon Steel | Finish: Zinc Plated.
Check Stock

uxcell Thin Open End Wrench, 18mm x 19mm Metric Mirror-Chrome Plated High Carbon Steel

  • 【Standard】18mm x 19mm metric sizes, 6.69-inch (170mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
  • 【Size Marking】Size stamped on both ends of the handle for quick identification..
Check Stock

uxcell Thin Open End Wrench, 24mm x 27mm Metric Mirror-Chrome Plated High Carbon Steel

  • 【Standard】24mm x 27mm metric sizes, 8.74-inch (222mm) total length..
  • 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
  • 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
  • 【Open End】Angled at 15-degree on each end allows an increased range of arc swings in narrow spaces. Two sizes per wrench make it more versatile..
  • 【Size Marking】Size stamped on both ends of the handle for quick identification..
Check Stock

BPS Knives Blank 01 - Full-Tang Blank Knife for Knifemaking- Carbon Steel 1066 Blade - Scandinavian Scandi Grind Knife Blank - DIY Knives Making Blades

  • Carbon Steel Knive Blade Blank for making knifes. Full-Tang Blade Blanks with screws.
  • Knife Making Kit: Full Tang Blank Knife and 3 screws. DIY knife set. Durable and robust high carbon steel 1066 knife blank.
  • Tempered Hardened to 57-59 HRC True Scandi grind. Blade has Jimping on the spine.
  • Knifemaker kit includes 3 screws(Knife Handle Fasteners M2.5 Inner Hexagon Screw).
  • Dimensions: Total length 8 1/2 inches, Blade length 4 inches, Blade thickness 0.11 inches.
Check Stock

10pcs Black 2020 Series Corner Bracket Plate 5 Hole L Shape Joint Plates for Slot 6mm 20S Aluminum Rail Accessories (10PCS T Shape Without Screws and Nuts)

  • 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile..
  • 【Type】Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile. 【Material】L Shape Joint Plates:6063 aluminum.
  • 【High Quality】T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized. Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless..
  • 【Widely Used】Compatible with all 20 series fasteners and accessories.
  • Suitable for 3D printer, CNC build, workbenches, lasers, brackets, furniture, fitness equipment, precision printers, automatic cutting machines, etc.
  • Applied in science, electronics, labs, home technology projects, displays/exhibitions, robotics, etc..
  • 【What You Get】10pcs L Shape Joint Plates.
  • 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..
Check Stock

Der Erwachte Super-Thin Open End Wrench Set, SAE, 6-Piece, Including 3/8\

  • 【Quality Wrenches】Thin, but strong. Made of premium carbon steel with mirror polish finish. Chrome plated for rust-resistance, heat treated for maximum strength and long lifespan. High quality wrench set exceeds ANSI standard..
  • 【1/8in Super-Thin】1/8 inch thin wrenches which let you reach fasteners in tight clearance. Useful especially in narrow spots where traditional wrenches can’t reach. Precisely machined for a perfect fit on all fasteners, giving you maximum torque without slippage..
  • 【Less to Carry】Two sizes per wrench provides more options with less to carry. Wrench sizes are stamped twice on both sides of handle for easier size identification: 3/8"x7/16.
Check Stock

SNUG Fasteners 100 Qty #6 x 1-1/4\ Oval Zinc Coated Phillips Head Wood Screws (SNG367)

  • ★MODEL TYPE: Heavy duty desktop fasteners figure 8- pack of 30,with 60 screws.Each fastener measures 1-3/16" x 5/8" x 12"gauge..
  • ★HIGH QUANLITY:12-gauge carbon steel (almost 1/8" thick) - zinc coated to prevent rusting and corrosion.It can be used for a long time..
  • ★Installation:Just use a forstner bit or router to make a cut out to screw this down to your frame..
  • ★WIDELY USE: These fasteners can be installed on the inside or outside of hardware / table tops / desk tops / cabinet fronts..
  • ★MONEY BACK GUARANTEE: If you're not completely satisfied, you can ask for a replacement or refund..
Check Stock