Top Carbon Steel Open End
uxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm
- 【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
- 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
- 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
- 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
- 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stockuxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 5mm, 2 Pcs
- 【Standard】5mm metric sizes, 3.03-inch (77mm) total length..
- 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
- 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
- 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
- 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check Stockuxcell Thin Combination Wrench with Offset 6-Point End and Angled Open End, Metric Mirror-Chrome Plated High Carbon Steel, 10mm, 2 Pcs
- 【Standard】10mm metric sizes, 4.84-inch (123mm) total length..
- 【Super-Thin】3mm (0.12") thickness design, which allows you to reach fasteners in tight clearance. It is especially suitable for narrow spots that traditional wrenches can’t reach..
- 【High Carbon Steel】Made of high carbon steel for strength and durability, with polished and chrome plated finish to prevent rust and corrosion..
- 【6-Point Box End Design】For secure fit on hex fasteners, offset by 15 degrees to leave space for fingers, prevent round-off and apply force to the flat sides of fastener heads instead of the corners..
- 【Open End】It is angled 15 degrees, so the wrench can be flipped over to engage fasteners twice as often in narrow spaces..
Check StockAuniwaig Double Open End Wrench, 165mm Length Metric Wrench, 14mm x 17mm Wrench Repairs Tool, 45# Carbon Steel, Chrome Plated, 1 Pcs
- SIZE- 14mm x 17mm/0.55 x 0.66-inch, Double open ends.
- MATERIAL- Nut Wrench is made of high carbon steel for strength and durability.
- SURFACE TREATMENT- Fully Polished and Chrome Coated support best Anti-Rusting Surface.
- EASY TO USE- 15 degree offset open end allows an increased range of arc swing in tight spaces.
- Two sizes per wrench providing more options with less to carry.
- WIDE USE- Double Open End Nut Wrench is Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs.
Check StockRannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs
- ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
- ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
- ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
- ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
- ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check StockBrewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)
- 【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
- 【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
- 【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
- 【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
- 【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..
Check StockKlein Tools 31737 Folding Jab Saw / Drywall Saw, Hand Saw with Lockback at 180 and 125 Degrees and Tether Hole
- Folding saw with durable carbon steel blade is as sturdy as fixed blade jab saws.
- Hand saw has faster cutting blade with triple ground teeth and ability to cut in both directions.
- Lockback mechanism secures the blade open at 125-degree and fully open at 180-degree.
- Folded saw keeps the blade from piercing through tool pouches and bags.
- Cushioned handle-end for easier palming of the saw.
Check StockVaper 41225 Chipping Hammer
- ... cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
- ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring handle to reduce the impact forces of contact. Besides, its special cone-shaped part includes flat end and sharp point end, allowing it easier to use in tight and small space..
- ✔️ Welding Gloves --- The 16 inches extra long fireplace gloves with 7.5 inches long sleeve can protect your forearms from grinding debris, welding sparks, hot coals and open flames, hot kitchen ware and hot steam. Effective even in extreme environments..
Check StockEveryday Carry Crooked River Knife, Axis Lock Knife with 3.7’’ D2 Steel Blade Wood Handle, EDC Manual Open Folding Pocket Knife with Thumb Stud, Belt Clip for Camping
- 【Axis Lock Knife】 Opened length:7.76’’. Blade length:3.23’’. Blade width: 0.87’’. Blade thickness:0.12’’. Handle length:4.5’’. Handle width:1.06’’. Handle thickness:0.43’’. Weight:2.36 oz/67.1g. Blade Material: D2 steel. Handle Material: carbon fiber..
- 【High-End D2 Steel】 Plain edge blade of the folding pocket knife is made of durable D2 steel and is heat-treated to a hardness of 59-61 HRC, which provides outstanding strength and is corrosion-resistant. Thumb Stud deploys the blade smooth and fast by one hand..
- 【Ultralight Carbon Fiber Handle】 Low profile pocket knife equipped with a lightweight carbon fiber handle, which ensures a comfortable grip. Exceptionally strong with a featherweight feel in the hand and gnarled texture across the board..
- 【Safe Axis Locking Mechanism】 With the axis locking mechanism, you can open and close the knife securely and smoothly, which is easy to use and very safe. Belt clip for everyday carrying..
- 【Ideal EDC Pocket Knife】 Reverse tanto blade is nimble, versatile, and made for the outdoors. With its sl....
Check StockSpyderco Emphasis Value Knife with 3.58' Stainless Steel Blade and Durable Black G-10 Handle - PlainEdge - C245GP
- Superior Quality - It is made from 8Cr13MoV stainless steel which is a low carbon, high chromium stainless steel with an excellent balance of toughness and strength..
- FRN Handle - The textured black G10 handle, 4.81 inches closed, has stainless steel liners and back spacer for strength, a liner lock, a lanyard hole, and a side to side reversible deep carry wire clip mounted at the butt end..
- Easy To Carry - The knife has a features of a black-coated deep-pocket wire clip that is reversible for left or right-handed users, allow discreet and tip-up carry..
- A Secure Grip - The blade locks open for secure use via the intuitive and robust Liner Lock mechanism providing a great strength-to-weight ratio..
- SPECIFICATION - The Spyderco Emphasis Knife has an overall open length of 8.31 inches and it weighs 4.8 ounces. Made in China..
Check StockKershaw Knives Clash, Serrated Knife (KER-1605ST)
- Versatile clip-point blade with a slight belly curve offers excellent piercing and slicing capabilities. The corrosion resistant, high-strength 4Cr14 blade steel has a stonewashed finish to conceal scratches..
- Glass-filled, nylon handle is contoured for comfort and promotes secure grip during use. The handle’s carbon-fiber-like texture complements the rugged, stonewashed blade..
- SpeedSafe technology makes this knife quick and easy to open with a manual push on the thumbstud or a pull back on the flipper. A custom pivot design and back spacer add unique touches for everyday carry..
- Hardworking in appearance and function, the Camshaft features a reversible deep-carry pocket clip and a blade that transfers maximum force into each push and pull..
- The knife measures 7.25 inches end to end when opened, 4.25 inches when folded, and weighs 3.1 oz..
Check StockWheel Accessories Parts Set of 24 Open End 12x1.5 Lug Nuts Zinc Finish Cone Seat 0.84' Length Acorn Bulge 19mm (3/4') Hex Open End Wheel Lug Nut (M12x1.5, 24 PC)
- SPECS: Open-end Acorn Bulge Design, Thread: M12x1.5 19mm (3/4") Hex 0.84" long.
- FITS: Vehicles with wheel studs requiring M12x1.5 thread and wheels that take a conical 60 degree seat with a 3/4 hex. Perfect for custom wheels with a big Center Cap on it..
- Cold Forged Carbon Steel then heat treated for enhanced rigidity plus zinc finish and exceptional strength..
- FEATURES: Zinc plated finish with Open End Acorn Bulge design, provides greater seating surface to prevent damage during installation..
- Kit includes 24 Chrome finish M12x1.5 OE Bulge Acorn.
Check Stock