Top Carbon Steel Pipe Fitting

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Jeemiter Castle Nut Removal Wrench for Nut Removal and Tighten for pipe fitting and collet nut

  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Fits all commercial and standard Castle nuts with a 1 1/4” OD and plumbing..
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Very easy to hang on you with the O ring end, smart and handy to use with a circle edge bar.
Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2 ,3/4 ,1 -CRQ01

  • 「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra....
  • 「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
  • 「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
  • 「ERGONOMIC DESIGN」Wide handle with dipped grips reduce fatigue and one-handed operation design to allow your free hand the ability to assist in....
  • 「VERSATILITY」It's compatible with regular Push-fit/Push-to-Connect brass fittings..
Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

LitKiwi 2PCS Stainless Steel 304 Beer Keg Coupler Fitting,Beer Line Connector Kit,Hex Nut 5/8'G Thread x 5/16' Barb Fittings,Suit for 5/16' ID Beer Line Hose with Clamps

  • ★【Great Marterial】Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion..
  • ★【General Size】The Thread—5/8"G(BSP),suit for most American beer keg coupler,the 5/16" Barb suit for beer tube which the ID little less than 5/16",it is bigger than the general-purpose models on the market and can support larger traffic..
  • ★【Professional Design】The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off..
  • ★【Wide Application】Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8"G thread to 5/16"barb fitting..
  • ★【Package Include】2PCS 5/8"G x 5/16" Barb fittings with 2PCS clamps.If you are not fully satisfied with our product, we will serve you whole heartedly..
Check Stock

Jeemiter Castle Nut Removal Wrench for Removal and Tighten Collet Nut Floor Heating Pipes Cars Walnut and Pipe Fitting

  • Fits all commercial and standard Castle nuts with a 1 1/4” OD and plumbing..
  • Material: Heat Treated High Carbon Steel / Case Hardened and Black Powder coated.
  • Commonly used for plumbing, pipe fitting, fishing rods, safes, automotive suspension, and hitch.
  • Very easy to hang on you with the O ring end, smart and handy to use with a circle edge bar.
Check Stock

Csst Flexible Gas Tubing 1/2 X 75

  • Saves time - 60% time savings vs. steel pipe fitting.
  • Cleaner and easier to handle than black steel pipe.
  • Bends around corners eliminating need for additional joints and fittings.
  • Use coordinating HOME-FLEX CSST fittings.
  • Great for seismic areas - ridged pipe often leaks after even small tremors.
Check Stock

(All in One) EFIELD 1/2 Inch Pex-b Pipe, Fitting, Clamp Tool, Clamps Cutter Combo Kit

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • Pex Crimp Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps and Steel Made Pipe Cutter.
  • Heavy-Duty Canvas Bag for Carrying and Storage Fitting and Tools.
Check Stock

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

  • PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: nipple joins two pipes or extending length.
  • HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
  • RATING APPROVAL: meets ASTM and ANSI standards.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock