Top Carbon Steel Puller Tool

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • ..., and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

SAMSFX Carp Fishing Baiting Rigs Tool Kit Set Fishing Bait Needle Swinger Driller Kit Combo (ABS Handle)

  • 7 in 1 carp fishing hair rig tool include harpoon & latch needle, hook needle, driller, knot puller, threading device,fishing braid line scissors.
  • Carp rigging needle was made of high-carbon steel with plastic handle, light weight and portable.
  • Knot puller tool was built in stainless hook & strong plastic T-handle, great for fishing line or hook knot tying.
  • Fishing Scissors: straight and partial serrated blades can cut clean and precise through braid, mono fishing lines.
  • This baiting rig tool set is great for boilies, pellets, meat, corn or virtually any bait you want to hair rig.
Check Stock

Dent Removal Kit 63pcs Paintless Dent Repair Kit with Golden Lifter Bridge Puller Glue Gun & Slide Hammer Suction Cup Dent Puller for Auto Body Dents Hail Damage Motorcycle Minor Dent

  • 【Professional Car Dent Puller】The new design golden dent puller is made of tempered high-carbon stainless steel and standard stainless steel. and it is not only for small pits but also for repairing large dent. robust and durable..
  • 【Paintless Dent Repair】The dent repair puller uses rubber/sponge as the base. The dent removal tool pulls dents through strong sticky hot melt glue, and the hot melt can be wholly removed without damaging the paint. Tips: we are not recommended to use the repair kit if your paint gets damaged before you repair the dent..
  • 【Easy to use】The design of the dent puller kit adopts the lever principle, and the bridge dent puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, efficiently and labor-saving. Easy to use and comes with an instruction manual. Suitable for beginners and professionals..
  • 【Widely Used】This 63pcs paintless dent repair tool kit with a wide range of repair functions, 30pcs different shape and size pulling tabs can be fixed various shapes of dents, suitable for any auto dents, repair door dings and hail damage and other dents..
  • 【What You Will Get】Gold dent puller*1, double pole bridge dent puller*1, different size suction cups*3, different blue ....
Check Stock

Dutton-Lainson - Tongue Jacks 6634 Agjack Tw 15 Wbkt Bp 22683: 250-6634 - 6634 agjack tw 15 wbkt bp 22683

  • Lever Effect & Welded Steel: Post puller is equipped with a 32" lever frame to pull out different types of metal or wood fence posts with lever effect. It uses a welded steel structure, which is not easy to crack under tremendous pressure due to low carbon content..
  • Durable Powder Coating: The surface of the fence post puller is coated with a layer of powder coating, which effectively isolates the metal and air contact. It keeps the surface from rusting or suffering from climate damage, thus prolonging the product's service life..
  • Long Chain Included Buckle: Post puller is paired with a 42" long choke chain attachment and a buckle that provides an excellent connection for wrapping around large obstacles. It quickly pulls out fence posts and stumps, and it is also easy to install and operate..
  • Dependable Base Platform: The wood post puller is attached to a 6" x 6" base platform that does not move easily during operation. It enhances stability when handling heavy items. Compared to a traditional post puller, it has more simple parts and is easy to store..
  • Interchangeable Pull Chain: According to various posts and fences, the post puller is suitable for many types of chains, such as the Choker-Style chain and T-column chain. Attach the chain puller tool sty....
Check Stock

Manelord Dent Puller - Dent Remover with T bar Dent Puller and Upgraded Dent Puller Tabs for Car Dent Repair and Metal Surface Dent Removal

  • Pro Design - Principle of leverage to design the slide hammer dent puller is ergonomic, efficient and labor. Works with hot melt glue to pull the dents out. So we suggest user buy hot melt glue gun and glue sticks to work with our dent repair tool..
  • Paintless Repair - The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. In the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint..
  • Widely used - Dent puller kit is suitable for most of big dents. Efficient action on automobile and other metal surface dents..
  • For DIY - Dent removal tool is coming with detailed repair steps introduction for operating, it makes the dent removal process easily. Our car dent puller can help you repair dents quickly by yourself for many times.(No glue gun and glue sticks included.).
  • Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.).
Check Stock

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

  • ...board by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet.
  • it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
  • 【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
  • 【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.
  • 【Multifunctional Tool】Not only is it the ultimate removal and remodeling tool, it can also be used as a nail puller and hex wrench for additional help..
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

ATPEAM Battery Terminal and Wiper Arm Puller Remove Tool Heavy-Duty Arm Bearing Remover Puller Repair Tool Kit 6-28 mm

  • Great Material: Made of 45 # carbon steel, strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Size: Jaw opening: 1/16" - 1-1/16" (6-28mm).
  • Easy to Use: Tighten knurled cone to force jaws under the cable clamp, turn center screw to lift clamp off terminal, the puller screw pad is designed to fit the top of the spline post for easy pulling..
  • Multifunction: Windshield Wiper Removal Tool is also can be used to remove bolted-on windshield wiper arms that fit over a tapered spline..
  • Package Included: 1 x Wiper Arm and Battery Terminal Bearing Remover Puller Tool.
Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

  • UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
  • BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
  • 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
  • REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
  • TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock