Top Carbon Steel Spiral Point Taps

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
  • Constructed of high carbon steel for durability.
  • Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
  • Perfect set for the professional craftsman.
  • Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the....
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

  • ★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
  • ★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
  • ★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
  • ★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
  • ★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..
Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

  • There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • Taps are designed with spiral flutes and the chip clearing process would be better.
  • These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
Check Stock

Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set

  • - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
  • - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
  • - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
  • - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
  • - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..
Check Stock

uxcell M3 M4 M5 M6 M8 Spiral Flute Taps Set Titanium Coated High-speed Steel Machine Thread Metric Screw Taps 5pcs

  • Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material & Coating: High-speed steel taps features high hardness and toughness, good for general purpose applications. Titanium coating is for capability, durability, wear-resistance, and long service life..
  • Applications: Suitable for processing blind holes and sticky materials. Suitable for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock