Top Carbon Steel Thread Repair

Thread Repair Tool Stainless Steel 20Pcs Rethreading Tap Set for Female Thread Repairing Insert Sleeve

  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
  • Easy to use,convenient to operate,saves effort and time in use..
Check Stock

FishTrip Fishing Rod Repair Kit Complete with Epoxy,10pcs Carbon Fiber Sticks Pole Building Kit, AB Glue, Wrapping Thread for Saltwater Freshwater Spinning Casting Rod

  • 【FishTrip Fishing Rod Repair Kit】The best choice to repair your broken fishing rod. The package contains: 10 sizes of carbon fiber sticks, epoxy adhesive, wrapping thread, tape, sandpaper, brush, scissors and Storage Box..
  • 【How to Repair】Just need you to insert the glue-coated carbon stick into the broken fishing rod first, wrap the repaired part with thread and apply epoxy adhesive coating, wait for it to dry. (For details, please watch the video we shot).
  • 【High Strength Carbon Fiber Rods】We provide solid carbon sticks in 10 sizes (diameter: 1mm~10mm). Not only suitable for small and medium light freshwater fishing rods, but also suitable for larger saltwater/sea rods. One set satisfies you for at least 10 repairs..
  • 【Bring Your Fishing Rod Back to Life】If your fishing rod breaks and you want to save your budget on fishing. Please fix it instead of getting a new rod..
  • Wonderful fishing pole repair kit for fishing lovers! If you have any questions about the product, please feel free to contact our customer service. We are always here to help you!.
Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

  • This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

  • Extremely stable performance: This thread helical coil repair tool kit is made of high speed steel and red color plastic handle, sturdy and durable in use and can be used in daily repair, car repair, drilling machine, etc.
  • Made of stainless steel of good rust and corrosion resistant..
  • Excellent practicability: The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision. Typical applications: high voltage switchgear, microwave communication, automotive parts, air separation equipment, radiators, etc..
  • Cost effective thoughtful kit: The use of wire screw sleeves for mm ---inch threaded hole conversion is convenient and fast. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.
  • All accessories are integrated in a box for convenient transportation and carriage..
  • Definitely recommend: Thread helical coil repair tool kit is ideal for restoring damaged threads, suitable for engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and da....
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the....
Check Stock

Hicarer 28 Pieces Bookbinding Tools Set Large-eye Curved Needles Thimble Ring Needle Threader Waxed Thread Clipper Bone Folder Paper Creaser Binder Clips Handle Awl Ruler for Handmade Books Bookbindin

  • Quantity: 28 pieces totally, include 6 x large-eye needle, 6 x curved needle, 2 x needle-threader, 1 x thread clipper, 1 x thimble ring, 4 x waxed thread, 2 x bone folder paper creaser, 3 x binder clips, 1 x ruler, 1 x needle bottle, 1 x wood handle awl.
  • Material: the needles are made of carbon steel, which is sturdy and can provide a long service, bone folder paper creaser and ruler are made from plastic, lightweight and easy to use.
  • Design of needles: 2 different designs of needles, include large-eye needles and curved needles, each type has 3 different sizes, enough for you to use and meet your different needs in the process of bookbinding.
  • 4 Colors of waxed thread: 4 different colors of waxed threads with 1 mm (150D) in diameter, include beige, white, black and brown, easy to use by hands or tools.
  • Bookbinding tools set: the bookbinding tools set has different tools for your bookbinding, can be applied to handmade or diy books bookbinding while you want to make books or repair old books and other craftsDescription.
  • 28 Pieces bookbinding tools set large-eye curved needles thimble ring needle threader waxed thread clipper bone folder paper creaser binder clips handle awl ruler for handmade books bookbinding supplies.
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Fastcom Press-In Threaded Insert Steel, Compatible With Metal, 1/4\-20 Internal Threads External Threads, 0.408\ Length (Pack of 50)

  • 【stainless steel】Thread inserts are made of high-strength diamond-shaped steel wire with high strength and wear resistance..
  • 【full set】This thread repair kit contains installation tool, thread tap, drill, wire thread inserts, you can repair thread with no other tool needed..
  • 【working principle】This thread repair set can be placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear resistance and high precision..
  • 【box packed】All accessories are well packed in a box for easy carrying and storage, every tool has a place to place in case of mess..
  • 【wide applications】This thread repair set can be widely used for high voltage switch gear, microwave communication, automotive parts, aerospace precision parts, electronic products, air equipment, radiators, etc..
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock