Top Case Fan Controller

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions..
Check Stock

Apevia FB4-RGB Frostblade 120mm Silent RGB Color Changing LED Fan for Gaming with Remote Control, 16x LEDs & 8X Anti-Vibration Rubber Pads (4-pk)

  • Apevia 120mm Silent Case Fan w/ 16x RGB Color Changing LED Lights & 8x Anti-Vibration Rubber Pads (4 on Each Side).
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 120mm x 120mm x 25mm. Fan Speed: 1350 +/- 10% RPM. Air Flow: 57.67 CFM. Low Noise Level: 24.7 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

RGB Cooling Fans for Computer Case 200mm Colorful Kit LED PC Computer Fan，2 Pack

  • 366 Colors Lighting Modes：Play lights with 366 colors to bring the right atmosphere to your system by the remote,easy controlle the light mode,speed,color,bright.RGB Fans 200mm for Computer Case 366 Adjustable Color LED PC Computer Fan with Ccontroller 2 Pack.
  • Quiet Fan Design: 200mm fan with unique 11 blades engineered for maximizing airflow while minimizing noise. fan speed at 800(+/-10%) RPM at low 20dB noise level and deliver an air flow of up to 95CFM..
  • Rubber Pads & Hydraulic Bearing:Equipped with rubber pads and hydraulic bearing, not only greatly reduce running noise 80% but also protect coverage for all corners..
  • Built in 36 LED Light Bulb Strip:Equipped with 36 high-quality LED light bulbs in each case fan, durable and stable, lifespan up to 20,000 Hours. It won’t be ‘’half shining’’ just like others..
  • Easy to Install: Fix the fans one by one onto your PC case with screws that come with, connect them altogether to the controller hub (included)at the appointed interfaces in order(from 1 to 2). And you are ready to go for the gorgeous lighting show..
Check Stock

Lian Li LANCOOL II MESH Performance Mid-Tower - Case Black with Type-C - LAN2MPX.50

  • 4 mm TG 2 x 140 mm PWM Fan Full Tower Computer Case.
  • 2x 140mm PWM Fan (front, 600-1200RPM) and 1x 120mm PWM fan (rear 600-1500 RPM),.
  • Top IO 4 steps (L M H PWM) fan controller to allow easy fan speed adjustment according to the.
  • Front (multi-way fan/radiator bracket): 1 X 360/280/240mm.
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...wer is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating. Including: motherboard, CPU, power cord, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't come with GPU..
Check Stock

Apevia LP314L-RGB Lunar Pro 140mm Silent Dual-Ring RGB Color Changing LED Fan for Gaming with Remote Control, 32x LEDs & 8X Anti-Vibration Rubber Pads (3-pk)

  • Apevia 140mm Silent Case Fan w/ 32x RGB Color Changing LED Lights (16 Outer Ring / 16 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side).
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 140mm x 140mm x 25mm. Fan Speed: 1200 +/- 10% RPM. Air Flow: 59.6 CFM. Low Noise Level: 29.4 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

Apevia LP412L-RGB Lunar Pro 120mm Silent Dual-Ring RGB Color Changing LED Fan for Gaming with Remote Control, 28x LEDs & 8X Anti-Vibration Rubber Pads (4-pk)

  • Apevia 120mm Silent Case Fan w/ 28x RGB Color Changing LED Lights (16 Outer Ring / 12 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side).
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 120mm x 120mm x 25mm. Fan Speed: 1350 +/- 10% RPM. Air Flow: 57.67 CFM. Low Noise Level: 24.7 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

darkFlash 120mm RGB Case Fan, CX6 Addressable ARGB Fan with RGB PWM Fan Hub, High Airflow 5V Motherboard Sync, Ultra Quiet, PWM Static Pressure Fan, High Performance Computer Case Fans, 5 Pack

  • 5V ARGB ADDRESSABLE RGB: 5pack 120mm case fans colors can be set through the mainboard software controller, Sync with 5V RGB enabled motherboards, and intelligent PWM speed control. Use software to achieve more free personalized customization. At the same time, RESET button control can be selected to connect..
  • PWM FAN and PWM CONTROLLER: The speed of the argb fans can be read through the motherboard software, Also the motherboard can automatically control the speed of the computer case fan according to the temperature of the chassis, Efficient energy saving and environmental protection..
  • PERFECT COOLING PERFORMANCE: Dynamic speed adjustment between 800 rpm to 2,000 rpm pushing up to 55.29 CFM of air, Sound Level- 18 dBA, minimizing noise or maximizing airflow. Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • SPECIAL SHOCK-PROOF DESIGN: Ultra-bright RGB LED lights, provide full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes. 16.8 million colors provide excellent heat dissipation, add fun and bring you a better gaming experience..
  • SIMPLE INSTALLATION & WARRANTY: 120mm CX6 5pack RGB fans link hub can use PWM and ARGB functions....
Check Stock

Apevia ET62-RGB Electro 120mm Silent RGB Color Changing LED Fan with Remote Control, 28x LEDs & 8X Anti-Vibration Rubber Pads w/ 2 Magnetic RGB Color LED Strips (6+2-pk)

  • Apevia 120mm Silent Case Fan w/28x RGB Color Changing LED Lights (16 Outer Ring / 12 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side) & 2 x 12" Magnetic with Adhesive Tape Color Changing LED Strips.
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 120mm x 120mm x 25mm. Fan Speed: 1350 +/- 10% RPM. Air Flow: 57.67 CFM. Low Noise Level: 24.7 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included. Comes with 2 Magnetic RGB Color LED Strips..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

NexiGo Switch Accessories Holiday Bundle, Enhanced Switch/Switch OLED Controller (Black) for Handheld Mode, 6-Axis Gyro, Mapping, Vibration, Game Storage Case with 10 Game Card Holders

  • 【Designed for the Switch/Switch OLED】Designed specifically for Switch / Switch OLED gaming consoles, this direct-plug controller is a must-have for any Switch fan. This controller includes two fitting sliders for the original Switch console. (sliders not needed for Switch OLED). Compatible with the Switch/Switch OLED version..
  • 【Advanced Controls】The NexiGo 1125 Ergonomic Controller is upgraded with four mappable back buttons. Map up to 16 key combinations onto the mappable back buttons. Supports Mapping of : A / B / X / Y / + / - / L / R / D-pad / L3 / R3 / ZL / ZR..
  • 【6-Axis Gyro Function & Dual Motors】The Switch OLED controller supports 6-Axis Gyro movement for highly tuned directional controls. It also features a dual-motor vibration function for a compelling and immersive gaming experience..
  • 【Large Capacity & Sleek Switch Case】Made in durable materials, the NexiGo Switch controller carrying case has a hard EVA plastic shell and a soft microfiber interior to effectively protect your device from scratches and falls. It can also hold up to ten Switch game cards, Switch OLED Joy-Cons, NexiGo 19252, Ne....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • ... is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to the official website of the system and download it, there is a corresponding tutorial for installation and use.Compatible with Win10 /OS, but you'll need to install the system yourself..
  • 【Kindly Note】The new version of mining case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating. The miner machine system doesn't come with GPU. Our products have undergone strict quality inspection before leaving the factory. If you encounter any problems during use, please feel free to c....
Check Stock

Apevia ST4P2-RGB Spectra 120mm Silent Dual Ring RGB Color Changing LED Fan with Remote Control, 16x LEDs & 8X Anti-Vibration Rubber Pads w/ 2 Magnetic LED Strips (4+2-pk)

  • Apevia 120mm silent case fan w/ 16x RGB color changing LED lights & 8x anti-vibration rubber pads (4 on each side) & 2 x 12" Magnetic with adhesive tape Color changing LED strips.
  • Comes with Controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote Control. Fan speed cannot be changed with the controller..
  • 120mm x 120mm x 25mm. Fan speed: 1350 +/- 10% RPM. Air flow: 57.67 CFM. Low noise level: 24.7 dBA. Life expectancy: 25, 000 hours. Control box comes with 4-pin connector for connecting to power supply. Case screws are included. Comes with 2 magnetic LED strips..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock