Top Case For Raspberry Pi 3

Black Protective Case / Box / Enclosure for Raspberry Pi Model B/ 2/ 3 with Aluminum Heatsink Cooler -- Access to All Ports

  • Black protective box case with 3pcs Aluminum Heatsink for Raspberry Pi 3/2//B+..
  • Fully updated for Raspberry Pi 3.Two sets of LED ports to accomodate Pi 3 as well as Pi 2 & B+..
  • To protect your Raspberry Pi 2/3/B+ against damages, dust and scratches.
  • Easy access to all ports and slots of the Pi.Heat sink openings for both CPU and LAN chip.
  • Get your geek on guys or buy it for the geek you love.
  • give that Raspberry Pi an awesome new home with this case..
Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock

Eleduino Raspberry Pi 3, 2 and B+ Case Aluminum with Fan (Black)

  • Aluminum case ,Customize for Raspberry Pi 3/Raspberry Pi 2/ Raspberry Pi B+.
  • High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation.
  • Good ventilation,easy carrying Simply Clicks Together Enclosure,good heat dissipation.
  • Smart design，not block the wifi/BT signals.
  • Access to all Raspberry Pi 3 /Raspberry Pi 2 / Raspberry Pi B+ consumer ports and GSI, camera and GPIO connectors.
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

Retroflag NESPi Case+ Plus with USB Wired Game Controllers & Cooling Fan & Heatsinks for RetroPie Raspberry Pi 3/2 Model B & Raspberry Pi 3B+

  • NESPI CASE+ functional Power and Reset Button with Safe Shutdown ,specifically designed for Raspberry Pi 3B+, Raspberry Pi 3/2 Model B. This case DOES NOT include any Raspberry Pi products..
  • Easy access to the SD-Card and all other ports without opening the case.
  • NES case specifically designed for Raspberry Pi 3 B+ (B Plus) 2.
  • Game Controller: Compatible OS — WINDOWS98/2000/ME/XP Mac os .xv10.2.8.
  • Game Controller: Fully tested to work with the Raspberry Pi 3B+ and Retropie. Plug and Play.No extra drivers needed!.
Check Stock

Raspberry Pi 3 B+ Aluminum Case with Housing Heat Dissipation, Metal Case / Enclosure with Heatsink Pillar for Raspberry Pi 3 Model B Plus / 3B

  • High Quality Heat dissipation Aluminum Material..
  • Compatible with Raspberry Pi 3 B+ / Raspberry Pi 3 Model B, NOT INCLUDE Raspberry Pi 3 board..
  • Whole Case Heat Dissiaption Design with Heatsink Pillar to touch the Chipset on the Raspberry Pi 3 Board.
  • All ports and slots of the case can match with Raspberry Pi 3 B+/3B.
  • With screws and silicone gel pads, very easy to assembly..
Check Stock

sb components 3.2\ TFT LCD Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 (Black)

  • This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
  • The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
  • It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
  • Wall Mountable. Access to all Pi 2 consumer ports..
Check Stock

for Raspberry Pi 3B+ 3.5 TFT Touch Screen with Case Touch Pen and Heat Sink 320x480 Resolution LCD Display for Raspberry Pi 3 Model B Pi 2 Model B & Pi Model B

  • STARTO Raspberry Pi 3 B+ 3.5 inch Touch Screen connects with SPI directly and support HDMI screen display at same time, better as human interaction....
  • The Raspberry Pi 3.5 inch Touch Screen can adjust the resolution by the software which also available for connecting Raspberry Pi 3 B+ directly,....
  • The screen support 125MHz SPI signal input, the refresh rate is about 50fps which is enough to play the videos or games and display stable without....
  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen case.
  •  The 3.5 inch resistive Touch Screen can be directly....
  • Protecting your screen and pi,the split design is easier to install,with white nylon column to help screen maintain balance.(No include Raspberry Pi).
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display

  • Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
  • Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
  • Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
  • With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
  • With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
Check Stock

Treedix 3.5inch TFT Touch Screen Module 50Hz 320x480 Resolution LCD Display with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry 4B Pi4

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. Please note that the ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch touch screen has 480 x 320 resolution, with resistive touch control.It supports up to 125MHz SPI signal input.
  • support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom..
  • Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+,4B).
  • This product has passed CE and RoHS certification and support Raspbian/Ubuntu/Kali system, provide driver and image. It can display stable without flicker.
  • The case use split design make it easy to install, protecting your pi computer and screen, and cooling fan with aluminium bracket installed and thermal silicon pad for cooling the chip to keep your pi computer and screen cool always..
Check Stock