Top Cast Sliding Plate

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • 【Cabinet Clamps】Cabinet Clamps made of primary steel and with steel sliding T-bars and an aluminum alignment plate, the cabinet clamp’s body and the side jaw are cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door ....
Check Stock

Cruiser Accessories 15190 Neo Sport License Plate Frame, Brushed Nickel

  • This frame can be mounted with the personalization bar at the top or bottom of the license plate and does not obstruct the state or registration information.
  • Durable zinc die cast metal frame has a brushed nickel finish.
  • Designed to fit all standard 6x12 inch novelty/license plates.
  • User friendly and easy to install, see back of package for installation instructions.
  • Engraveable bar, which can be mounted at the top or bottom of the plate.
  • Cruiser Accessories' frames are made with high quality materials and workmanship, providing a durable product that will look good for years.
  • Distinctive license plate frames from cruiser make excellent gifts for any car owner.
Check Stock

Ebros Personal Size 10.75"L x 7"W Cast Iron Sizzling Fajita Skillet Ridged Japanese Steak Plate With Handle and Wood Base For Restaurant Home Kitchen Cooking Accessory For Pan Grilling Meats Seafood

  • This Cast Iron Ridged Steak Plate is oil coated for a non stick surface. Clean cast-iron skillet after every use. Wipe interior surface of still-warm skillet with paper towels to remove any excess food and oil. Rinse under hot running water, scrubbing with nonmetal brush or nonabrasive scrub pad to remove any traces of food. (Use small amount of soap if you like.
  • This is an Ebros Gift exclusive collection. It comes with our Ebros Gift Satisfaction Guarantee when sold by Ebros Gift..
  • This Simple But Elegant Ridged Cast Iron Sizzling Plate is your best buddy to cook personal sized meats or vegetables. Cook with the sizzling plate on your stove then remove and put on the wooden base for serving. Serving your cooked food on this sizzling plate adds flavor and style to your secret recipe just like they do it in restaurants!.
  • The Wooden base is 12.25″ long, 6.75″ wide and 0.75″ tall. The cast iron handle is 5″ long..
  • This Simple But Elegant Ridged Cast Iron Sizzling Plate serves 1 person in general and measures 10.75″ long, 7″ wide and 0.75″ tall approximately. The set weighs about 2.75 pounds..
Check Stock

HulkFit 2-inch Iron Plate for Strength Training, Weightlifting, Single (5 Pounds), Silver

  • Purpose - A must have for any strength training in your home gym, fitness equipment repertoire. Designed with Olympic ergonomic grip handles that are built into the plates to allow for easy maneuvering and weight plate specific exercises..
  • Usage - Use our 2” Barbells with Clamp Collars on our Sport, Pro, Elite Series Power Cage or Squat Stands to maximize the potential of the Cast Iron Weight Plates. Increase your total body strength with sets of bench press, deadlifts, lunges, and squats..
  • Materials - Durable enamel coated cast iron..
  • Product Specifications - 2.5 lbs plate 6.49” x 6.49” x 0.59”, 5 lbs plate 8.07” x 8.07” x 0.62”, 10 lbs plate 9.44” x 9.44” x 0.98”, 25 lbs plate 11.8” x 11.8” x 1.37”, 35 lbs plate 14.17” x 14.17” x 1.53”, and 45 lbs plate 15.55” x 15.55” x 1.53”..
Check Stock

HulkFit 2-inch Iron Plate for Strength Training, Weightlifting, Single (10 Pounds), Silver

  • Purpose - A must have for any strength training in your home gym, fitness equipment repertoire. Designed with Olympic ergonomic grip handles that are built into the plates to allow for easy maneuvering and weight plate specific exercises..
  • Usage - Use our 2” Barbells with Clamp Collars on our Sport, Pro, Elite Series Power Cage or Squat Stands to maximize the potential of the Cast Iron Weight Plates. Increase your total body strength with sets of bench press, deadlifts, lunges, and squats..
  • Materials - Durable enamel coated cast iron..
  • Product Specifications - 2.5 lbs plate 6.49” x 6.49” x 0.59”, 5 lbs plate 8.07” x 8.07” x 0.62”, 10 lbs plate 9.44” x 9.44” x 0.98”, 25 lbs plate 11.8” x 11.8” x 1.37”, 35 lbs plate 14.17” x 14.17” x 1.53”, and 45 lbs plate 15.55” x 15.55” x 1.53”..
Check Stock

HulkFit 2-inch Iron Plate for Strength Training, Weightlifting, Single (45 Pounds), Silver

  • Purpose - A must have for any strength training in your home gym, fitness equipment repertoire. Designed with Olympic ergonomic grip handles that are built into the plates to allow for easy maneuvering and weight plate specific exercises..
  • Usage - Use our 2” Barbells with Clamp Collars on our Sport, Pro, Elite Series Power Cage or Squat Stands to maximize the potential of the Cast Iron Weight Plates. Increase your total body strength with sets of bench press, deadlifts, lunges, and squats..
  • Materials - Durable enamel coated cast iron..
  • Product Specifications - 2.5 lbs plate 6.49” x 6.49” x 0.59”, 5 lbs plate 8.07” x 8.07” x 0.62”, 10 lbs plate 9.44” x 9.44” x 0.98”, 25 lbs plate 11.8” x 11.8” x 1.37”, 35 lbs plate 14.17” x 14.17” x 1.53”, and 45 lbs plate 15.55” x 15.55” x 1.53”..
Check Stock

HulkFit 1-inch Iron Plate for Strength Training, Weightlifting, Single (25 Pounds), Silver

  • Purpose - A must have for any strength training in your home gym, fitness equipment repertoire. Designed with Olympic ergonomic grip handles that are built into the plates to allow for easy maneuvering and weight plate specific exercises..
  • Usage - Use our 1” Barbells with Clamp Collars on our Sport, Pro, Elite Series Power Cage or Squat Stands to maximize the potential of the Cast Iron Weight Plates. Increase your total body strength with sets of bench press, deadlifts, lunges, and squats..
  • Materials - Durable enamel coated cast iron..
  • Product Specifications - 2.5 lbs plate 6.49” x 6.49” x 0.59”, 5 lbs plate 8.07” x 8.07” x 0.62”, 10 lbs plate 9.44” x 9.44” x 0.98”, 25 lbs plate 11.8” x 11.8” x 1.37”, 35 lbs plate 14.17” x 14.17” x 1.53”, and 45 lbs plate 15.55” x 15.55” x 1.53”..
Check Stock

Cast Iron Steak or Fajita Plate 9 x 5 1/2 with Wooden Holder and Handle

  • Sizzling Cast Iron Plate and Wooden Platter.
  • Cast Iron Plate measures 9 x 5 1/2. Wooden plate, Measures 11x6..
Check Stock

Sammons Preston Plate with Inside Edge 9 Plate with Food Spill Prevention Aid Durable Plates with Inner Lip Eating Support for Children Adults Elderly and Disabled Polypropylene White

  • Unique inside edge design is the efficient solution to preventing food from accidently spilling or falling off your plate.
  • 9" diameter white plate made of polypropylene, with a 1" rim and 1/2" edge for pushing and scooping food.
  • Textured bottom on plate prevents food from sliding around on plate or mixing together, making it a great plate guard for handicapped, disabled, or....
  • Durable, textured bottom surface of the plate provides a pleasing aesthetic while also preventing food from sliding too much around in the plate.
  • Microwave safe plate, dishwasher safe up to 180º, BPA free, Phthalates free, non-latex.
Check Stock

HulkFit 1-inch Iron Plate for Strength Training, Weightlifting, Single (45 Pounds), Silver

  • Purpose - A must have for any strength training in your home gym, fitness equipment repertoire. Designed with Olympic ergonomic grip handles that are built into the plates to allow for easy maneuvering and weight plate specific exercises..
  • Usage - Use our 1” Barbells with Clamp Collars on our Sport, Pro, Elite Series Power Cage or Squat Stands to maximize the potential of the Cast Iron Weight Plates. Increase your total body strength with sets of bench press, deadlifts, lunges, and squats..
  • Materials - Durable enamel coated cast iron..
  • Product Specifications - 2.5 lbs plate 6.49” x 6.49” x 0.59”, 5 lbs plate 8.07” x 8.07” x 0.62”, 10 lbs plate 9.44” x 9.44” x 0.98”, 25 lbs plate 11.8” x 11.8” x 1.37”, 35 lbs plate 14.17” x 14.17” x 1.53”, and 45 lbs plate 15.55” x 15.55” x 1.53”..
Check Stock

Creality Multi-Kilogram Spool Holder Filament Spool Metal Holder for PLA/ABS/TPU/Other 3D Printing Materials

  • Compatible with 500g, 1kg, 3kg, 5kg material racks..
  • High Stability: The feeding seat is rotated by the bearing to avoid flaming paper jams and entanglement, which makes feeding more smooth..
  • Exquisite Craftsmanship: The entire frame of the 3D printer paper feed bracket is composed of thin sheets of metal and is integrally cast to ensure long-term durability and the stability of the material rack..
  • The silicone base gasket can prevent sliding, and the base is designed to be bent to adapt to uneven ground..
  • Simplified appearance and easy assembly. The overall frame is made of metal plate, and the integral casting makes installation and disassembly easier and more convenient..
Check Stock

Kreg KBCBA Bench Clamp Base

  • Data: Maximum open jaws 3 inches, net weight 3 pounds..
  • Widely used: Aluminum vise clamps can be tilted and rotated 360°, and do not need to be punched to install on the edge of a 2.4-inch thick table. It is an ideal choice for some industries, such as jewelry lovers, craftsmen, model making , Electronic products and others..
  • High-grade materials: The vise will not deform even under high pressure, because the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel. To provide reliability and corrosion resistance..
  • Anti-skid design: the anti-skid texture on the inside of the jaws increases the clamping force of the jaws without sliding.
  • Rubber covers will protect your product from injury. The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Gifts: a adapter that can be used as an electric drill bracket and a hexagon wrench..
Check Stock