Top Cat 6 Panel

iwillink 24 Port RJ45 Through Coupler 1U Cat6 Patch Panel UTP 19-Inch with Back Bar, Wallmount or Rackmount, Compatible with Cat5, Cat5e, Cat6 Cabling

  • Install this Ethernet patch panel effortlessly in universal 19" racks, cabinets, or wall mount brackets with 1U (1.75") standard height..
  • Jack shutters protect the gold plated contacts from corrosion and dust when cable is not plugged in..
  • Heavy duty network patch panel 24 port supports Ethernet, made for Cat 6 cabling, compatible with Cat 5e /Cat 5 ..
  • Gold plated contacts ensure a correction free connection.Numbered ports and color-coded T568A and T568B wiring diagram give quick reference.White space for easy marking and identification..
  • This patch panel enables quick, easy cable patching. Just plug Cat6 cables into its 24 front RJ45 ports, and use a 110 or Krone punch-down tool to terminate color-coded connections in the rear..
Check Stock

Cat6 Ethernet Cable 50ft LAN Cable, 26 AWG High Speed RJ45 Network Patch Cable for Router, Modem, Computer, Faster Than Cat 5e/5 Cable, Gray(50ft)

  • Cat6 Ethernet Cable 50 ft : Supports both Cat6 and Cat5e applications. The RJ45 cable connector used for this cable fits perfectly in both Cat6 and Cat5e ports..
  • Wire Construction:Cat-6 Ethernet patch Internet cable 8P8C RJ45 connector with gold-plated contacts.26AWG Stranded conductors. Each of the 4 twisted pairs are separated by PE cross insulation to prevent crosstalk. tested durable for family or engineering use..
  • Cat6 cable Transfer Rate: Cat 6 internet cable 50 ft Support Bandwidth 250MHz & Transmitting data at speeds of up to 1000 Mbps (or 1 Gigabit per second).10/100/1000 mbps (1000Base-T Gigabit).
  • Wide Range of Applications:The 50 feet cat 6 ethernet patch cable Connecting computer or gaming system to cable modem, DSL, router, hub, switch or patch panel. Network computers in office or home..
  • Quality Control ：Each Cat6 network cable 50 ft goes through rigorous testing to ensure a secure wired internet connection with exceptional speed and reliability..
Check Stock

iwillink 24 Port Blank Keystone Patch Panel with (12-Pack) Blank Keystone Jack Inserts and (25-Pack) RJ45 Cat6 Keystone Coupler

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project..
  • Phosphor Bronze with Gold plated on plug contact area and easy snap-in retaining clip..
  • Cat 6 keystone inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568 standard..
Check Stock

TRENDnet 24-Port Cat6 Unshielded Patch Panel, Wallmount or Rackmount, Compatible with Cat3,4,5,5e,6 Cabling, For Ethernet, Fast Ethernet, Gigabit Applications, Black, TC-P24C6

  • Install this Ethernet patch panel effortlessly in universal 19" racks, cabinets, or wall mount brackets with 1U (1.75") standard height..
  • Heavy duty network patch panel 24 port supports Ethernet, made for Cat 6 cabling, compatible with Cat 5e /Cat 5 ..
  • Gold plated contacts ensure a correction free connection.Numbered ports and color-coded T568A and T568B wiring diagram give quick reference.White space for easy marking and identification..
  • This patch panel enables quick, easy cable patching. Just plug Cat6 cables into its 24 front RJ45 ports, and use a 110 or Krone punch-down tool to terminate color-coded connections in the rear..
  • IWILLINK is committed to providing customers with the highest quality products and services. If you have any dissatisfaction or quality problem when you receive the item, you can always contact us and we will give you a full refund or replacement..
Check Stock

VENTION 5PCS Cat7 RJ45 Ethernet Modular Keystone Jack 50U Gold Plated Snap-in Connector Socket Shielding Adapter 10G Network (5 PCS/Pack)

  • The Cat 7 Keystone Jack is designed to snap into wall plates, patch panels, and surface connection boxes for quick, seamless deployment with standard sized keystone ports,this RJ45 keystone jack provides the perfect solution for your Ethernet networks..
  • Cat.7 Faster Network Speed: up to 10G network, 600MHz high speed data transmission ensure signal stability without distortion. And this metallic conncetor perfectly match on standard gigabit ethernet cable like type 86 network panel..
  • Anti-oxidation Shell: Matel shell high shielding, 50U gold plated interface corrosion resistant more. Lock latch type installment, ensured the connection is more stable.180-Defree Easy Termination Jack supports tool-free, impact tool, or crimp tool termination..
  • Buckle Design: The connection is conveniently suitable for standard type 86 network panel snaped into wall plates. CAT.7 supports unshielded (UTP) 23 to 26 AWG solid or stranded wire, Backwards compatible with older RJ-45 networks (eg. Cat.5,6,7 cabling).
  • T568B Standard: Mainly for the line sequence when the cable is connected to the crystal head(1.orange white, 2.orange, 3.green white, 4.blue, 5.blue white, 6.green, 7.brown white, 8.brown)..
Check Stock

iwillink Cat6A Shielded Keystone RJ45 Coupler 25-Pack, Zinc Alloy Metal Housing Ethernet Coupler, Female to Female Cat6a Keystone Jack, Silver

  • The blank keystone patch panel is compatible with different kinds of standard keystone jacks for audio, video, and data. These include CAT5e, CAT6, CAT6A, USB, and HDMI..
  • The unmounted terminal block adopts a snap-in design for easier installation. When you need to make adjustments or modifications, there is no need to take apart the network rack..
  • Removable writing pad with bold numbering for quick cable identification. Adjustable rear cable management rod can accommodate various cable diameters..
  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Cat 6 keystone inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568 standard..
Check Stock

iwillink Waterproof RJ45 Coupler, Shielded Female to Female Waterproof Ethernet Coupler, IP68 Ethernet Outdoor LAN Cable Connector for Cat5e/Cat6/Cat7 Ethernet Cable, (2 Pack)

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project..
  • Universal networking compatibility: Cat 6 Ethernet patch cable uses an RJ45 connector to provide universal connections from computers, printers, servers, routers to network media players, network storage devices, VoIP phones, and other standard office equipment..
  • Premium quality materials: The CAT-6 Ethernet patch cable gold-plated contacts and strain-relief boots provide durability for accurate data transfer and corrosion free connections.Meets or exceeds Category 6 performance in compliance with the TIA/EIA 568-C.2 standard..
Check Stock

Detroit Packing Co. 24 Port CAT6A RJ45 Through Coupler Patch Panel with Back Bar, Wallmount or Rackmount, Compatible with Cat5, Cat5e, Cat6, Cat6A, UTP STP Cabling (CAT6a Shielded, 24-Port)

  • Heavy duty 24 port patch panel supports Ethernet, made for Cat 6 cabling, but backwards compatible with Cat 5e and Cat 5 cabling..
  • Future-proof your network connection for 10-Gigabit Ethernet with this durable RJ45 patch panel.
  • Install this Ethernet patch panel effortlessly in universal 19" racks, cabinets, or wall mount brackets with 1U (1.75") standard height.
  • Gold plated contacts ensure a correction free connection. Numbered ports and color-coded T568A and T568B wiring diagram give quick reference.
  • Network patch panel complies with the UL fire safety requirement (E486099). Use included D-rings and cable ties for easy cable management.
Check Stock

iwillink 50 Pack RJ45 Cat6 Pass Through Connectors, Ethernet Cable Crimp Connectors UTP Network Plug for Solid Wire and Standard Cable, Gold Plated

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel.——High heat conductivity/low thermal resistance/does not conduct electricity..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project.Future-proof your network for 10-Gigabit Ethernet at a Cat5e price with this convenient and cost effective keystone coupler for Ethernet..
  • Phosphor Bronze with Gold plated on plug contact area and easy snap-in retaining clip.——Ideal for overclocking - No evaporation or sweating..
  • Cat 6 keystone inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568 standard..
Check Stock

Tripp Lite 24-Port Cat6 / Cat5 Ethernet Patch Panel, Feedthrough Patch (RJ45 to RJ45), 1U Rackmount, Cable Management Bar, (N254-024)

  • 24 PORT: Tripp Lite’s Cat6 Feed-Through 24-port patch panel provides patching without punching down bulk wire to the back of the panel..
  • CAT6/CAT5 PATCH PANEL: Cat6 RJ45 Jacks on both sides of the panel..
  • CERTIFIED: Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring..
  • EASY INSTALLATION + CABLE MANAGEMENT: 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel..
Check Stock

Jingchengmei 16-Port 1U Hinged Rack Blank Patch Panel for Keystone Jack Cat.6 or Cat.5E, 19\ Rackmount (H1UKS16H, Black)

  • Product Size : Height 1.75" x Width 19" x Depth 0.39 " after assembled, taking 1U Space.
  • Fits for any Standard 19-inch Relay Rack, Cabinet or Wall Bracket..
  • Hinged Side: Hinged Side can be assembled at left or right side according to your own usage.
  • you can open from the holding side, then the panel can be reversible for easy access & maintenance..
  • Accepts All Snap-in Jacks: This 16-port Blank Patch Panel Accepts Almost All Snap-in Jacks,Such as Cat 6 or Cat 5 E. Use Keystone Jacks & Inserts to Configure Your Patch Panel to Accommodate a Variety of Setups..
  • Heavy Design: This Keystone Panel is Made of Cold Rolled Steel with Powder Coating..
  • Each Port Numbered: Each Port is Numbered for convenience..
Check Stock

iwillink 24 Port RJ45 Through Coupler 1U Cat6 Patch Panel STP Shielded 19-Inch with Back Bar, Wallmount or Rackmount, Compatible with Cat5, Cat5e, Cat6 Cabling

  • Unshielded Cat6 Female to Female keystone jack can be used connect two Cat5e/Cat6 Ethernet network cables..
  • Fits all standard keystone wall plates and blank patch panel..
  • Cat6 keystone inline coupler is easy for voice, home networking, home office, video and more DIY project..
  • Phosphor Bronze with Gold plated on plug contact area and easy snap-in retaining clip..
  • Cat 6 keystone inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568 standard..
Check Stock