Top Cat40 Tool Holder

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer

  • Nail-in cable organizer provides snug and secure placement of an LMR 240, RG8X, RG58 or RG59 coax cable, RG6 digital video coaxial cable, digital audio coaxial cable, Ethernet Cat 5 or Cat 6 network cable, 12 to 16 AWG speaker wire, phone wire, USB cable, or slim video cable.
  • The cord holder supports most cables with a 7mm outside diameter or smaller.
  • Handy cord management alternative to wire mold, raceway, cable holder, or conduit.
  • Ideal solution for routing cables such as a short run TV coaxial cable in a home theater setup or a long run antenna cable in an office warehouse.
  • Organize and route cables along baseboards or wood trim molding with these cord clips.
  • Run cables in tight spaces around door frames through the wire clips with the confidence that they will remain in place.
  • Secure cable management clips prevent tripping hazards for kids or pets.
  • The cord keeper secures most round electrical cords of small appliances and electronics to prevent accidental disconnection and provide a clean looking installation.
  • Convenient 200 pack wire holder clips come in a plastic container to store spare cable clips in your tool box or garage.
  • One piece cable clip with an integrated nail with no extra parts to lose.
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

Tactical Double Pistol Magazine Pouch Mag Holder

  • Universal Mag Holder: Our double magazine holster fits most double(dual) stack 9mm/40/45 magazines, Such as Glock 17, Glock 19, Glock 19X, Glock 22, Glock 26.
  • Walther PPX PPQ(For more models, please check the FIT magazines list.).
  • Clip-on the Belt & Adjustable Cant: You can simply clip this universal double magazine holder on and off your belt with the clip-on belt loop(fits belts up to 2.0''). This double magazine holder also features a 60 degrees adjustable carry angle. Set your exact preference by simply adjusting the screw with the Allen Key(included)..
  • Side-clips Design & Retention Adjustment: The Side-clips feature allows this double magazine pouch to fit 9mm/.40 Magazines in length 1.29'' - 1.37'', in width 0.78'' - 0.9'' in tool-free way while keep the mags locked and tight with no movement. And this mag holster also has great retention adjustment that allows you to set the tension to your personal comfort by simply loosening or tightening the screw in the middle of the holder..
  • Durability: These mag holders are made of durable, lightweight polymer mat....
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

WellMall Garage Organization and Drill Storage - 2 Pack Power Tool Organizer Wall Mount Style, Great for Power Tool Drill as Tool Utility Shelves & Tool Rack, Perfect for Father's Day

  • [Well Organized] WellMall power tool organizer can turn your tools mess workbench or wasted wall space into a tidy and high efficiency working place, which by a glance at the all tools on the wall mount tool holder. Especially for power tools like drills..
  • [Much More Loading Capacity] This power tool holder with heavy duty design would help you to load maximum 100 lb tools by using all 4 wall mount anchors. This power tool storage, for top shelf max load 40 lb and below 4 tool slots with max capacity 80 lb..
  • [Sturdier Slots] By updating with 3 point welding (others just 2 point welding), this tools organizer will help your tool rack's slots much sturdy. Preventing drill holder wall mount won't be broke and bent easily, which can protect your power tools..
  • [Compact Design & Muti-use Workplace] 16" width, 7.48" height and 5.51" depth, WellMall tool organizers and storage holder with 4 installation holes and 3.95inch between each would be a ideal choice for mounting on the correct pegboard. Also a great choice for be mounted on the wood wall or cement wall, idea as workshop organizers and storage..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Misaky Women’s Pet Pouch Hoodie Animal Carrier Hood Tops Carry Cat Pullover Blouse Kitten Holder Sweatshirt (Pink, L)

  • ♥ FUN PET CARRIER - Pet Pouch Hoodie, a ideal tool for helping you to carry small pets like Puppy or kittens around and socialize..
  • ♥ NICE QUALITY - Strong zippers and snaps & durable, and stylish looking pullover pet carrier hoodie..
  • ♥ EASY WASH - The pet holder pouch has a soft, removable, machine-washable liner that allows for easy cleaning..
  • ♥ FREE YOUR HANDS - This pet carrier hoodie can help to keep your hands free when youare lounging or walking around! Great gift for a cat lover and cat who is spoiled and snuggly..
  • ♥Enjoy With a Cat, Dog or Other Small Pet - The ultimate way to cuddle your dog, cat, or any other beloved animal. While resting at home, you can interact with the pet, to enhance the feelings, big pockets can also put cell phone, ipad, or snacks..
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
  • and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
Check Stock

Door Buddy Adjustable Cat Door Latch - Grey 2 Pack. Pet Door Holder to Dog Proof Cat Litter Box & Keep Dog Out of Cat Food. Simpler Than Cat Gate or Interior Cat Door. Adjustable Door Strap for Pets

  • ... 2 Pack - The original adjustable door strap for cats. The easiest kitty door alternative that gives cats back their space! No need for a cat doors indoor and no need to fight a bulky pet gate with cat door. With Door Buddy door latch lock you can hold door open for cats in a matter of seconds. While cheap cat door holder latch knock-offs are tempting, Door Buddy dog proof door latch is made in the USA and is both durable and effective..
  • ✅ KEEP DOGS OUT OF LITTER BOX - Door Buddy’s door locks for dogs is the easiest way to keep door cracked open for cat while keeping dogs (if slightly larger than cat) out of the litter box and cat food. Thanks to our extra strong 3M adhesive, Door Buddy installs in seconds and can keep dog out of room (up to 120lb). Finally, a cat door interior door without any hassles and a covered litter box alternative that won't make your cat feel trapped..
  • ✅ SIMPLE & EFFECTIVE - A tool-free installation that is simple and works! The 3M adhesives stick to your door and door frame, the adjuster allows you to keep the door cracked open just enough to suit your cat's width, and finally lock the hook into the latch. The strap will flex around the door so it is easy to latch from either side of the door for quick and convenient ac....
Check Stock

Prometheus: Up & Running: Infrastructure and Application Performance Monitoring

  • RJ45 Crimp Tool Kit: Ethernet crimper tool for 6P/8P Pass Through cat6, cat6A, cat5 and cat5e connectors plugs, suitable for 23AWG-28AWG cable.
  • All-in-one RJ45 Pass Through Crimp Tool: A professional RJ45 crimper that can easily cut, strip, and crimp CAT5, CAT5e and CAT6/6A cables. Even if you are a beginner, you can also quickly complete the installation according to our user’s manual.
  • The Pass Through technology significantly improves work efficiency and has100% succses rate, Fast and Reliable.
  • Multi-Function Phone/Ethernet Cable Tester: Automatically tests the continuity, open, and short of twisted pair data wiring (RJ45/RJ11/RJ12 ) connections. Power by one DC9V battery (9V battery not included).
  • Packaging: User’s Manual, Ethernet Crimper tool, Network/Phone cable tester, Mini Wire Stripper, 50PCS CAT6 Pass Through connectors, 50PCS Covers and FREE spare blades(Crimping blade and Stripping blade).
  • Quality Assurance: 100% satisfaction or money-back guarantee. Any questions or demands about our Network tool kit within 18 months, please feel free to contact us for the most satisfactory solution.
Check Stock