Top Cd11m Aluminum Electrolytic Capacitors

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • 129 square inches of sound radiating surface on both the front and back.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-300 watts per channel.
  • Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

Electronic Component Assortment kit 1390Pcs LED Diode Transistor Capacitor Resistor

  • All products are tested for stability, consistency and reliability,Ensure product excellence..
  • This is a great assortment of components for electronic professionals or enthusiasts..
  • The kit includes diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
  • If any problem, please contact us. We will give you a satisfactory solution as promised..
Check Stock

Maxmoral 100pcs 18650 Lithium Battery Heat Shrink Tubing Tube Assorted Kit PVC Heat Shrinkable Sleeve Shrink Film 5 Color

  • Package included:100pcs Heat Shrink Tubing Tube.Including:20pcs Green.
  • Excellent environmental protection,insulation,stable performance,low shrinkage temperature and fast shrinkage..
  • Application:Widely used in aluminum,electrolytic capacitors,batteries,electronic components,lighting,LED pins,bottle mouth combination packaging,etc..
  • Function:It can beautify the appearance,insulation and moisture resistance of the covered object..
Check Stock

ALMOCN Ceramic Capacitor Assortment Kit,24Value 960PCS 2pF-100nF DIP Monolithic Multilayer Ceramic Chip Capacitor for Hobby Electronics, Audio-Video,Electronic Project

  • 24Value 960pcs High quality Aluminum ceramic capacitor kit, Capacitance Tolerance: ±5%..
  • Capacitance Model: 2pF~100nF (2pF, 5pF, 10pF, 22pF, 30pF, 33pF, 47pF, 68pF, 100pF, 220pF, 330pF, 470pF,680pF,1nF,1.5nF,2.2nF,3.3nF,4.7nF,6.8nF,10nF,22nF,47nF,68nF,100nF), Total 24 Different Values,Each model 40pcs..
  • Clearly mark:Marker code on every electrolytic capacitor, and with a label mark capacitor value, easy to distinguish.
  • all capacitors are packed in re-use box, easy to manage..
  • High quality:Long service life,excellent humidity resistance, miniature size, wide capaciHigh quality:Long service life,excellent humidity resistance, miniature size, wide capacitance, reliable performance. tance, reliable performance..
  • Wide Application:Wide Applications in Computers, Data Processing, Telecommunication, Industrial Control, etc.This Ceramic capacitors assortment used for Audio-Video, DIY Electronics projects,guitar parts and Vehicle Repair Projects,etc..
Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Ciglow Frequency Divider Board,3 Way Speaker Frequency Divider,300W Crossover Filter Audio for DIY KTV Stage Speaker

  • TREBLE+MIDRANGE+BASS THREE-WAY FREQUENCY: KTV stage professional speaker crossover DIY upgrade tool to improve sound quality.
  • HIGH-QUALITY MATERIALS: high temperature resistant wire, wire wound ceramic resistor, imported metal film.
  • HIGH-QUALITY CAPACITORS: low-loss and high-quality, no longer have the problem of electrolytic capacitors.
  • ENSURE LARGE LOAD CAPACITY: long-term durability, very good sound quality.
  • OVERCURRENT PROTECTION DESIGN: simple and beautiful lines, reasonable layout of components.
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

Basic Electronic Components Kit Resistor 600pcs Diode 100pcs LED 6 Colors 120pcs Electrolytic Capacitor 12 Values 120pcs Transistor 18 Types 180pcs Ceramic Capacitor 30 Types 300pcs Total 1420PCS

  • All products are tested for stability, consistency and reliability,Ensure product excellence..
  • This is a great assortment of components for electronic professionals or enthusiasts..
  • The kit includes diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
  • If any problem, please contact us. We will give you a satisfactory solution as promised..
Check Stock

Aideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V

  • 【Features】Input overcurrent protection.
  • 【DIY projects】It adopts 7 electrolytic capacitors and a 33MM high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions. Use a piece of aluminum radiator on the back to dissipate heat ，Reserve fan mounting holes, suitable for more DIY projects..
  • 【Adjustable Voltage 】1200W 20A DC converter boost Input voltage range is DC 10-60V, Output voltage range is DC 12-80V.can be arbitrary adjustable.
  • Input current: 0.5-20A (MAX),Max output power is 1200W.(exceeds 15A, please add fan cooling）.
  • 【Output Power】Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W，input 60V * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. It is recommended to use a smaller adjustment range..
  • 【Widely Application】can be used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
Check Stock

Fielect 80Pcs Aluminum Radial Electrolytic Capacitor 10uF 63V Low ESR Green 5x11mm High Ripple Current,Low Impedance for TV, LCD Monitor, Radio, Stereo, Game

  • 【Dimension】 -Capacitor capacity:10uF.
  • 【Material】 -Electrolytic capacitors are made of high-quality standard materials, with high insulation strength, fast switching speed, high power consumption and good current performance.
  • 【Features】- The capacitor has excellent moisture resistance, small size, wide capacitance and reliable performance.
  • 【Advantage】-Each electrolytic capacitor has an identification code and a marked capacitance value, which is easy to distinguish and use.
  • 【Application】 -This series is suitable for power supply, communication equipment, switching power supply, audio amplifier interconnection level, industrial measurement.
Check Stock

OCR 24Value 500pcs Electrolytic Capacitor Assortment Box Kit Range 0.1uF－1000uF

  • The nice sturdy box helps you keep all caps in order..
  • All of the capacitor is marked the value,easy to find what you need..
Check Stock