Top Cement Carbide Insert

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

  • 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
  • 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
  • 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
  • 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

LSHUZIYU 7-1/4\(185mm)-4PCD, Arbor 5/8\

  • Diameter 7-1/4" (185mm), 4PCD, Arbor 5/8" with diamond washer. Max Speed RPM 10000.
  • For Fiber Cement and Laminate Flooring, Very Sharp And Clear Cut.
  • 4 Polycrystalline Diamond Tipped For Longer Cutting Life, Compared Carbide-Fiber Cement Blades 60X Times Longer.
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check Stock

Dremel 26150684JA Polishing Kit by Dremel

  • Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
  • Overall Size: 10 x 3mm / 0.4" x 0.12"(D*T).
  • Hole Diameter: 6mm / 0.24"(Max), 4.5mm / 0.18"(Min).
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Accusize Industrial Tools 3/8 x 3/8 Cut-Off Holder Parting Tool Mgehr06-2 of 2387-2003 with 10 Carbide Inserts for Cutting Aluminum

  • Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
  • Double End Cut-Off Carbide Inserts for Cutting Aluminum.
Check Stock

Polishing Bonnet, 9 to 10 In, Wool (Pack of 10)

  • Package Content: 10pcs x Carbide Insert, 1 x Plastic Case.
  • Overall Size: 11 x 6 x 3mm / 0.43" x 0.24" x 0.12"(L*W*T).
  • Hole Diameter: 4mm / 0.16"(Max), 3mm / 0.12"(Min).
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Accusize Industrial Tools 1/4\ x 3/8'' Cut-Off Holder, Parting Tool, Mgehr04-2 of 2387-2001 with 10 Carbide Inserts for Cutting Steel, 2387-0001ins

  • Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
  • MGMN-2 Double End Carbide Cut-Off Insert.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock

Masonry Drill Bit Set & Cement Drill Bit, Professional Drill Bit Set (10PCS) for Glass/Brick/Plastic/Cement/Wood/Tile/Etc, Industrial Strength Carbide Drill Bit Tip, 1/8\-1/2\ by TITGGI

  • TITGGI Masonry drill bit set, industrial strength carbide drill bit tip, excellent abrasion resistance, make the drilling much more easier. this cement drill bits can easily penetrate various material (glass, ceramic, cement, wood, brick, travertine, hard plastic, etc.).
  • This masonry bit is suitable for most general drill, electric drill, hand drill and bench drill, the double U-type groove slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly, strong tungsten carbide drill bit tip and longer service life of TITGGI masonry drill bit..
  • Package includes 10 Pcs drill bit set: 1/8.
Check Stock