Top Cemented Carbide Pellet

Roland 3-Pack Type Replacement Cemented Carbide Blade Set 45 Degree

  • 45 degree cemented carbide blades. Pack of 3.
  • Same as the red/green cap replacment blades, FACTORY DIRECT USA.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

SpectraLOCK Pro Premium Grout AB Full Unit / Requires 9 LB (4.1 kg) Part C Carton

  • ...rout due to the angled-design. The special angled non-slip handle fits your hand well, helping you easily and comfortably to grip it, so you can control the direction and strength better and get into grout areas easier..
  • 【Sturdy & Durable Blade】The blade is made of cemented carbide granule layer, which is sturdy, durable and wear-resistant. This gritty surface may help you scrub away the old grout remnants thoroughly and effectively..
  • 【6 Extra Blades Included】You will receive 2 pieces of grout saw. Each grout removing tool comes with an already installed blade and 3 extra blades for replacement. The blade is attached to the saw with two screws, which is very easy to replace..
  • 【High Quality】The handle is made of ABS and TPR plastic and the blade is made of cemented carbide. It is sturdy and durable, providing you with long-lasting use. On the top of the handle there is a hole for you to hang the saw as well..
Check Stock

10 Pieces Nail Drill Bits Set 3 Pieces Cone Tapered Barrel Carbide Nail Cuticle Drill Bit 3 Pieces Flat Top Large Barrel Carbide Bit 3 Pieces Round Top Large Barrel Head Nail Carbide Bit Gold

  • Durable and reliable: our nail drill bits are made of strong and quality cemented carbide and tungsten carbide, with strength, pointedness, durability....
  • Widely applicable: the set includes 10 nail drill bits of different styles and sizes, which fit most nail drill machines that use 3/32 inch bits, each....
  • Tapered barrel carbide nail drill bit: these cuticle drill bits consist of tapered barrels and flat top designs, ideal for nail trimming, filling....
  • Flat top large barrel carbide bit: the design of the flat top head works well in carving, grinding, sanding, polishing, it can deal with your own nail....
  • Large barrel head carbide bit: smooth round top large barrel head carbide bits have 3 different grit size, can be combined to polish nail surface or....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

10PCS 16ER AG60 Insert Lathe Threading Tool Indexable Carbide Lathe Tool for Threading Turning Holder

  • Model : 16ER AG60 external thread insert (right), Material: carbide.
  • Pitch : AG60 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm..
  • Coating : Nanostructured TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
  • If you need matched tool holder SER1212H16 and SEL1212H16, please search 【 ASIN: B07RC57RXM 】.
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock

Indexable Threading 60Degrees11ER/11IRAG60 indexable Inserts Insert Lathe Threading Tool Carbide Lathe Tool for Threading Turning Holder

  • Model : 11ER / 11IR AG60 threading insert (Right /Left cutting ).
  • Blade length:11mm, 60° universal pitch thread insert, machining pitch range: 0.5~1.5mm..
  • Carbide with TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
  • Design for stainless steel and steel parts, macthing for Threading tool holders.
  • Package include: 5PCS 11ER AG60 + 5PCS 11IR AG60.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size 1/8

  • ★【Pack of 2 / Premium Bright Finish】 Multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely....
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper....
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length,....
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1-1/4 inch, Overall Length: 2-1/4....
  • ★【IMPORTANT, PLEASE READ BEFORE BUYING】Tungsten Carbide or cemented carbide is a composite material, although it looks like a metal, it is a....
Check Stock