Top Centering Tool Holder

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • ...ol life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

74 pcs handheld dowel jig kit 2 in 1 Center Scriber Line doweling hole jig with Wood Dowels Pins Drill Bits for Woodworking Drilling and Marking

  • 2 in1 multi-function: Self Centering Dowel Jig for Drilling holes and Center Scriber Systerm for Marking (pin the pencil to a diameter of about 6mm) . Material : ABS engineering plastics and high hardness metal..
  • Useful Woodworking dowel jig kits : Package contain 1 pcs self centering dowel jig , 3 pcs drilling guides, 3pc wood drill bits,3 size *20 pcs wooden dowels, and 3pc dowel centering pins (Size :6mm(1/4”),8mm(5/16”)10mm(3/8”) , 1 pcs small wrench woodworking tool accessory kits ..
  • Adjustable to fit 16mm-106 mm wooden board : Self center doweling jig is movable with screws to fit different thickness of wooden board . It is widely used for precise positioning when punching holes on the side of wood boards, with good verticality and higher punching accuracy..
  • Precise Measurement -This woodworking centering tool can quickly and accurately mark center lines on wood board, scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.".
  • Easy and Quickly: Positioning ensure accurate alignment when drilling, can quickly and accur....
Check Stock

Fowler 52-646-400-0 Extender Dial Bore Gage Kit with 1.4-6 Measuring Range

  • ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
  • EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
  • SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.
Check Stock

Dowel Jig for Woodworking, Self Centering Doweling Jig, Professional Dowel Jig Kit Bushings Set, Stainless Steel Self Centering Dowel Jig, Perfect for Building Wood Frames, Making Shelves, and DIY

  • ☬Fast and Precise Drilling☬The dowel jig has 4 ultra-precise pilot holes to ensure accurate drilling. Fixing the self centering doweling jig to the board allows precise positioning without measuring or calculating for easy and convenient precision drilling.
  • ☬Multiple Applications☬The dowel jig kit can be used for mortise and tenon holes, building wood frames, and some home construction projects. The drill jig for straight holes is perfect for making shelves, cabinets, tables, chairs, and mounting railings. The self-centering woodworking dowling jig is a must-have tool in every carpenter’s toolbox.
  • ☬Available in Different Drill Sizes☬In addition to the four holes in the drill jig, the self centering dowel jig comes with different-sized bushings for more accurate positioning. The drill sizes of the dowel jig kit woodworking include 1/4″, 3/8″, 5/16″, 7/16″, and 1/2″ to meet your different needs.
  • ☬Built to Last☬The dowel jig is made of precision-hardened stainless steel, which is rust-resistant and offers extreme strength and long service life. The doweling jig is built with high-quality steel and is not easily damaged.
  • ☬Adjustable Design☬The jaw width of the self centering dowel jig kit can be adjusted according to the thick....
Check Stock

Double Flaring Tool Kit 7 Dies with Tubing Bender (Flare Tool) and Pipe Cutter (1/8” to 1-1/8” Inch / 3-30mm) For Automotive Brake Line Copper Brass Aluminum

  • Complete kit: the flaring kit is all that is included, complete with dual flaring capabilities, allowing the mechanic to focus on the job rather than looking for parts..
  • Extensive torch adapter: double flaring toolset features 7 adapter sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" to help artisan complete the entire range of brake line flaring tool projects..
  • Precision and durability: this twin torch kit is made of the strongest steel material and chrome-plated for easy handling and precision..
  • Double flaring tool: this multi-purpose flaring tool has double flaring function, providing users with a wide range of applications and versatility..
  • Self-centering yoke: the brake line reamer tool consists of two rods covering seven diameters, with self-centering, slideable forged steel yoke to help form a professional and high quality yoke..
Check Stock

RC Servo Tester Centering Tool ESC Motor Checker Built in BEC 3CH High Precision for Airplanes Remote Control Models

  • The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
  • With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
  • It is able to connect three sets of servo or ESC at the same time, use SCM to control..
  • Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
  • FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

VISM NcSTAR VTGLK5 G5+ Glock Pocket Tool, Black

  • The innovative magpopper tool will help you disassemble your block magazines in seconds for servicing and Cleaning.
  • The corners of the tool handle are used for centering the frame pins in the frame when reassembling the frame.
  • The G5+ pocket tool also features a bottle opener.
Check Stock

DINGPAI Candle Wick Kit, 50pcs Candle Wicks 4 inches, Candle Wick Stickers 60pcs and Candle Wick Centering Device 2pcs, Candle Making Supplies for Candle Making, Candle DIY

  • INCLUDING 50pcs 100% cotton candle wicks, 60pcs candle wick stickers, 2pcs candle wick centering device, Pack of 112 value pack, a great gift to all candle making lovers..
  • CANDLE WICKS: ECO-FRIENDLY 100% cotton. Measures 4 inch in length and base 0.5inch/12.5 mm in diameter. Wicks with coated in soy wax. Suitable for soy, beeswax, palm, coconut, paraffin, etc..
  • CANDLE WICK Centering Device size is 3.9 inches in length, 0.98 inch in width. Our wick holder that made of high-quality metal, strong, durable, high quality, designed for long-term use of candle holder designed to ensure long-term use..
  • CANDLE WICK STICKERS: round stickers dots in white color, double sided foam and adhesive made, measures 0.75inch in diameter, 1mm in thickness.
  • Ideal for securing wicks to the bottom of your candle container..
  • How to Operate: stick one side of the double-sided adhesive sticker to the metal bottom of the candle wick, and stick it firmly to the bottom of the cleaned jar, Keep the candle wick in the center of the candle holder. Those candle making supplies will make your DIY homemade candles easier..
Check Stock

Cup Keeper Plus Car Cup Holder Adapter Expands to Hold Larger Beverage Containers up to 3.7\ Diameter / Fits 32 oz Hydro Flask, Yeti, Nalgene Water Bottles (Black)

  • ...andles will fit with ease. Secret Compartment for storing extra change, a key, or mints. Unlike other lightweight cup holder adapters, the storage area can act as a weighted base to counterbalance taller containers. Just add weight..
  • FITS MOST CUPS - The 2-sided Flip N' Fit Disc that your beverages sit on has a Self-Centering design to accommodate different sized beverages by centering narrower containers. The Flip N’ Fit Disc can be removed to hold taller or slimmer beverages, so they are stable in your car. The disc fits under the bottom of Cup Keeper PLUS for easy storage when not in use..
  • NO TOOLS or Installation Needed/Perfect Companion: Simply place it in your cup holder and set your mug, cup, or bottle in Cup Keeper. Works in cars, trucks, RVs, Boats, golf carts. Gadjit Cup Keeper Plus Holder provides stress-free driving since there is no rattling, and the drink is securely held in place. Stay Hydrated or Awake with your favorite beverage in a stable holder!.
  • DURABLE/PORTABLE & MADE IN USA: Gadjit’ s Car Cup Holder is made of durable high strength ABS plastic that won’t warp or crack and is unbreakable in extreme heat or cold. The sturdy base holds cups, bottles, and beverages in place during sudden breaks and prevents cups and bottles from....
Check Stock

YG-1 High Speed Steel NC Spotting Drill Bit, Uncoated (Bright), Straight Shank, Slow Spiral, 120 Degree, 3/4\ Diameter x 5-5/32\ Length (Pack of 1)

  • Made of 8 percent cobalt and high speed steel.
  • For more precise centering work on NC/CNC machine.
  • A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously.
Check Stock

YG-1 - 0161L High Speed Steel NC Spotting Drill Bit Uncoated Bright Straight Shank Slow Spiral 90 Degree 1/4 Diameter x 2.76 Length Pack of 1

  • Made of 8 percent cobalt and high speed steel.
  • For more precise centering work on NC/CNC machine.
  • A larger diameter in respect to the subsequent drilling tool permit to obtain the centering and chamfering simultaneously.
Check Stock