Top Centrifugal B

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

Electric Pto Clutch Repl Grasshopper 606242

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

Thten Trimmer Replacement Spools Cap Covers Compatible with Greenworks 21332 21342 24 Volt 40V 80V Cordless Weed Eater with 3411546A-6 Cap Covers Parts Auto-Feed String Edger 16ft 0.065” 2925 (2 Pack)

  • [Spool Cap Specification]: Compatible with Greenworks spools, 16ft 0.065 inches, compatible with original spools models 29252 and cap covers models 3411546A-6..
  • [Compatible models]: Compatible with greenworks weed eater string trimmer Cap: 21332, 21222A, 21602, 21062, 21132, 21242, 21282, 21312, 21302, 21342, 21362, 21262, 2100202, 2100302, 2100702, STBA40B210, ST40B410, BST4000, ST40L00..
  • [Professional CNC winding spool Cap]: Compatible with green works spools by the CNC machine cutting and winding, automatic line change. Manual winding is cumbersome and can easily get stuck during use, which can cause damage to the string trimmer..
  • [Rugged material]: High-quality ABS spool & durable polyamide nylon thread, flexible and long service life. Use centrifugal force and aerodynamics to reduce drag and achieve fast cutting..
  • [Precautions for use]: When you using this product, protective measures should be taken to avoid damage to the body caused by spilled wires. The product is only suitable for young grasses. For strong weeds, use other tools such as blades to trim..
Check Stock

BOOTOP 29092 String Trimmer Replacement Spool 29252, Compatible with Greenworks 24V 40V 80V Weed Eater Cordless Trimmer 21332 21342.065-Inch Single Line Trimmer Replacement Spool (8 Spools, 2 Caps)

  • Replacement spool Compatible with Greenworks Single Line 24V and G-MAX 40V String Trimmers.This trimmer string replacement parts for Greenworks include 8 Pack of string trimmer spool and 2 Pack Trimmer Cap. Auto feed spool replacement parts for Greenworks use centrifugal force and aerodynamics to reduce drag and achieve fast cutting..
  • Note:1)Always wear eye protection and long pants when using this product to avoid injury. Unplug tool before changing, installing, or removing accessories. 2)Feel free to contact us by emails if you have any problems.If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock

Ryobi One PLUS+ AC80RL3 OEM .080 Inch Twisted Line and Spool Replacement for Ryobi 18v 24v and 40v Cordless Trimmers Pack of 6

  • Cordless grass trimmer spool line diameter 0.080 inch to fits line hole perfectly. Spool line length 11ft provide a wider range of mowing..
  • Compatible with Ryobi cordless trimmers:18V,24V and 40V. Replacement spool model Ryobi ONE+ AC80RL3..
  • Auto feed system replacement trimmer spool eases the tedious work of hand-winding spools. Use centrifugal force and aerodynamics to reduce drag and....
  • Strong centrifugal force and cutting fast during using, recommend to wear eye protection and long pants to avoid unnecessary injury..
  • High-quality ABS spool & durable polyamide nylon thread, flexible and long service life. Use centrifugal force and aerodynamics to reduce drag and....
Check Stock

EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, Green

  • Membrane: Ultracel-um Regenerated Cellulose.
  • Description: EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, green.
Check Stock

TAKPART Electric Lawn Mower PTO Clutch for Warner Grasshopper Snapper Toro 5218-1 5218-67 388769 606242 7058925YP 105-1671

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

Abu Garcia C3-6500 Ambassadeur Baitcast Fishing Reel

  • Baitcast fishing reel designed for strength, smooth operation, and precision.
  • Engineered for smoothness with 3 stainless ball bearings and 1 roller bearing.
  • Carbon Matrix drag system provides smooth and consistent drag.
  • 6 pin centrifugal brake applies consistent pressure for an exceptionally precise cast.
  • Extended bent cranking handles and power knob offer added torque for hard pulling fish.
  • Unrelenting power and premium performance.
Check Stock

2 Dental Lab Quartz Zirconia Centrifugal Casting Crucible Hooded High Quality

  • 2 Dental Lab Quartz Zirconia Centrifugal Casting Crucible Hooded.
  • Made of fused quartz and high quality zirconia. It will last through many casting jobs.
  • Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high frenquency casting machine.
  • Bottom size: 2 3/4" (L) x 1 " (W) Height: 1 7/8".
  • Estimated Delivery Time: Between 7 to 14 days.
Check Stock

Centrifugal Clutch 3/4' Bore 12 Tooth 35 Chain for Go Kart Mini Bike Fun Kart 2-7 HP Engine Fits for Honda GX160 GX200 GX140 GX120 GC160 GC19

  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • Package included:1x 12 Teeth Centrifugal Clutch, 1x #35 Chain, 2 x built-in screws and 1 x Connecting Link, Easy installation, a perfect replacement part for your mini bike and go kart..
Check Stock

Juicer, Juicer Machine for Whole Fruit and Vegetable with Wide Feed Chute, Centrifugal Juicers with 2 Speed and Pulse Function, 2021 Upgraded 400W Motor, BPA Free, Silver, 14.56x7.48x12.99 inch

  • ?More Healthier and Nutrition?The centrifugal juicer uses food-grade materials, full stainless steel, anti-corrosion sharp blades and precision filters to protect your health.
  • compared with other juicers, you can get 35 percent more juice and 20 percent more vitamins and minerals..
  • ?Efficiency Juicer Machine?With it's 400W Powerful motor, centrifugal juicer required about only 3 minutes to fill one cup of juice, comes with a lidded pitcher for collecting juice, Or putting our own glass directly under the juice spout. making it easier to juice straight into your to-go cup and reducing counter clean-up..
  • ?Two-speed juicer?Centrifugal juicer have low and high speed for different fruit. low speed '?'(13000rpm-15000rpm) is suitable for soft fruits, such as peeled oranges or tomatoes, High speed'?' (16000rpm-18000rpm) is suitable for hard fruits, such as carrots, apple and etc. Choosing the right speed help you to get more juice..
  • ?Professional and Safety Design?Juicer Extractor with locking system arm, it will not work without cover locked into place. Overload protection system will switch off machine once overheating occurs. Don't put too much fruits and vegetables for each juicing.
  • after working for 5 minutes, please cool down for 10 minutes before using.
Check Stock