Top Centrifugal Granulator Manufacturer

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control,Low Speed,Capacity 20 ML x 6-110v,4000 RPMby CALU LUKY

  • Centrifuge Machine -Time Rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency.
  • Widely Used:Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower....
  • Lab Benchtop Centrifuges:Please insert the tubes into the machine symmetrically, or will not work properly in an asymmetric state.It has 3 adjustable....
  • Easy to Install:Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped....
Check Stock

Electric Centrifuge Machine Lab Centrifuge 8x20ml 4000rpm for Serum/Fat Separator PRP Extractor 110V US Plug

  • [PARAMETERS] Capacity: 8x20ml, speed: 0-4000rpm, relative centrifugal force: 1920xg, voltage: 110V, timing: 0-999min.The test tube capacity of this centrifuge is 20ml, and the actual centrifugal capacity should not exceed 80% of the test tube capacity. This is the best centrifugal effect..
  • [TIMING&SPEED CONTROL] 0-4000rpm speed is adjustable, 0-999min timing, please adjust the time and speed according to your needs..
  • [LCD DISPLAY] Real-time display of speed and time on the digital display screen, you can check the remaining time during work..
  • [TRANSPARENT COVER] The transparent cover is convenient for observing the centrifugal effect, and has the function of opening the cover. After the cover is opened, the machine will stop rotating immediately..
  • [Satisfactory service] We provide a one-year warranty period, if you have any questions after receiving the goods, please contact us directly. We will give you a satisfactory answer within 24h..
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

Lab Benchtop Centrifuge Machine Large PRP Centrifuges 10ml/15ml *6 Capacity,500-5000rpm(Max. 3074xg),Digital Display w/Timing

  • Digital plasma centrifuge for up to 6 of 15ml tubes .Speed can be adjusted from 500-5000rpm,max relative centrifuge force is 3074xg.Timing Range is 10s~99min59. The LCD display with ability to change between RPM and RCF can show time and speed at real-time, more conducive to the observation of samples..
  • This centrifugadora de plasma is with short time centrifugal function. Short spinning is possible as long as the SHORT button is held down.No need to set the speed and time . With Intelligent electronic lock automatically open the cover after the machine runs, without manual pressing..
  • The aluminum alloy rotor of this prp centrifuge machine is calculated as an optimized design,it has the advantages of light weight and high speed .Hollow soundproof cover,fully absorb noisy,quite operation. Perspective window can directly observe the operation.
  • Powerful sucker hold the table firmly,make this low speed laboratory centrifuge run smoothly..
  • JOANLAB centrifuge plasma prp machine is widely used in Widely used in clinical medicine, analytical laboratories, biology, genetic engineering, immunology, etc..
  • Directly from manufacturer-JOANLAB is a professional laboratory equipment manufacturer.One year warranty with professional customer support..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

Electric Pto Clutch Repl Grasshopper 606242

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

Ryobi One PLUS+ AC80RL3 OEM .080 Inch Twisted Line and Spool Replacement for Ryobi 18v 24v and 40v Cordless Trimmers Pack of 6

  • Cordless grass trimmer spool line diameter 0.080 inch to fits line hole perfectly. Spool line length 11ft provide a wider range of mowing..
  • Compatible with Ryobi cordless trimmers:18V,24V and 40V. Replacement spool model Ryobi ONE+ AC80RL3..
  • Auto feed system replacement trimmer spool eases the tedious work of hand-winding spools. Use centrifugal force and aerodynamics to reduce drag and....
  • Strong centrifugal force and cutting fast during using, recommend to wear eye protection and long pants to avoid unnecessary injury..
  • High-quality ABS spool & durable polyamide nylon thread, flexible and long service life. Use centrifugal force and aerodynamics to reduce drag and....
Check Stock

EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, Green

  • Membrane: Ultracel-um Regenerated Cellulose.
  • Description: EMD Millipore UFC501024 Centrifugal Filter Units, 10k NMWL, 24/pk, green.
Check Stock

TAKPART Electric Lawn Mower PTO Clutch for Warner Grasshopper Snapper Toro 5218-1 5218-67 388769 606242 7058925YP 105-1671

  • Fitment:Grasshopper 388767, 388769, 606242, 388771, 388768, 604183, 71379, Kees 7058295, Prime 7-06270, 7-06279, Massey Ferguson 58925, 7058925, McCulloch 58925, 7058925, Craftsman 35520.
  • Fitment: Ariens 00574200, 574200, 09407700, 990003, 990004, 990300, 09049000, Gravely 09049000, Warner 5218-147, 5218-214, 5218-257, 5218-26, 5218-58, 5218-67, 5218-1, 5218-33, 5218-238,.
  • Fitment: Toro Z320 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z325 1997 (SN 790001-799999) 1998 (SN 890001-899999), Z350 2000 (SN 200000001-200999999) 2001 (SN 210000001-210999999), Z355.
  • Its working is totally depends upon the centrifugal force created by the driving member (engine or motor). The centrifugal force is used to engage the clutch with driven shaft. As the engine starts rotating, it produces a centrifugal force which makes the sliding shoes to move outward. Since the drum is connected to the driven shaft, so the power is transmitted from the engine shaft to the transmission shaft and finally to the load..
  • To ensure this part goes with your machine you should always go by the model number and serial number, which is normally found under the seat of your riding mower..
Check Stock

Broan-NuTone 671 Ventilation Fan, White Square Ceiling or Wall-Mount Exhaust Fan, 6.0 Sones, 70 CFM

  • VERSATILE FAN: Ventilation fan helps eliminate , tobacco smoke, and cooking odors and can be installed in either the ceiling or wall.
  • EFFICIENT: Operates on 70 CFM and has a 6.0 Sone rating to ensure a peaceful surrounding when in operation.
  • EASY INSTALLATION: Torsion springs grille mounting - no tools necessary for a quick and easy installation. Compact housing fits easily between ceiling joists or wall studs. Our instillation guide is located above the reviews on this page..
  • DECORATIVE: Paintable polymeric grilles allow you to ensure the fan is cohesive with your existing decor.
  • FEATURES: Plug-in, permanently lubricated motor with the Broan-designed polymeric blower wheel for high-quality operation every time.
  • Compact housing fits easily between ceiling joists or wall studs.
  • Backed by 1-year limited manufacturer's warranty.
Check Stock