Top Ceramic Abrasive Angle Grinder Discs

Zorfeter 20 PCS 9-Inch Sanding Disc, 100 Grit NO-Hole Aluminum Oxide Round Flocking Sandpaper for Drywall Sander, Self Stick

  • Benchmark Abrasives 4-1/2" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

LotFancy Stripping Disc, 6PCS 4 1/2” x 7/8” Quick Easy Strip and Clean Discs, Paint and Rust Remover Stripper for Angle Grinder, Silicon Carbide Abrasive Wheel for Wood Metal Fiberglass, Purple

  • PREMIUM SILICON CARBIDE ABRASIVE: Each abrasive strip disc made from durable silicon carbide and bonded with strong fiberglass backing.
  • Long lasting uniform grinding effect and improved cut rate.
  • CLOG-RESISTANT & DURABLE: Stripping wheel with non-woven nylon webbing for effective, clog-resistant grinding.
  • Fiberglass backing to absorb vibration and offer additional durability and reinforcement.
  • PAINT AND RUST REMOVER: Strip disc removes rust, paint, weld spatter, oxidation and coatings quickly and effortlessly, without damaging the original surface.
  • -Purple strip discs have the longest service life and highest efficiency than the black and blue strip discs.
  • DESIGNED FOR ANGLE GRINDERS: 4.5” Strip disc with 7/8" arbor fits angle grinder paint stripper. Note - DOES NOT FIT Wagner paint eater.
  • WIDE USE: Paint stripper is used for surface preparation, conditioning and finishing on metal, fiberglass, wood.
Check Stock

Generic 3.35Inch Wood Shaping Disc 78 Inch Bore Carving Compatible with DeWalt Bosch Milwaukee Makita, Grinding for Sanding Polishing (Silver Arc Type)

  • Benchmark Abrasives 5" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Benchmark Abrasives 7\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 60 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 5\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 36 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor aluminum oxide resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of aluminum oxide grain that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

ABN Aluminum Oxide Roloc Abrasive Sanding Discs 50-Pack, 2” Inch, 60 Grit – Metal Wheels for Surface Prep and Finishing

  • ...UST, PAINT, AND OTHER COATINGS: Whether you are using these round sandpaper discs to clean and deburr or to blend, finish, and polish, they will get the job done.
  • These roll lock metal sanding disc tools will help you remove paint, rust, glue, or other stubborn adhesives and materials.
  • BUILT TO LAST: Aluminum oxide abrasive orbital sanding discs are known for their low heat retention, superior cut rate, and durability making them ideal for prepping and finishing soft and hardwoods, chip and fiber boards, plastic, rubber, cork, ferrous and non-ferrous metals, painted surfaces, and other building materials.
  • Aluminum oxide material is bonded with resin to provide resistance to overload when working.
  • FITS YOUR TOOLS: Quickly and easily replace your used grinding discs.
  • Each roll lock drill grinder disk has a unique r-type torque screwed attachment that allows you to connect to your mandrel bit shaft (not included).
  • Use these sand paper discs as a right angle die grinder sanding disc, an air sander drill sanding disk, an electric drill sanding disc, an orbital sander disc, or with any other type of sanding rotary tool.
  • 60 GRIT ORBITAL SANDPAPER DISC SET: Each package includes a quantity of 50 of the ABN sanding discs 2 inch roloc discs with r-lock base at....
Check Stock

Grinder Wrench Adjustable Pin Spanner Wrench Angle Grinder Lock-Nut Wrench For Grinders

  • ★Pin Spanner Wrench Main Using:The adjustable pin wrench is for use with locknuts on angle grinders when fitting or removing abrasive discs.
  • ★Pin Wrench Fit Modle:Suits most grinders and Lock nuts. Ideal Replacement Pin Wrench For All Angle Grinders, Bench Grinders, Circular Saws, and Mitre Saws etc.
  • ★Pin Spanner Wrench Design: Pin Wrench Easy twist knob adjustment,Adjustable Extent:10-30mm.Heat treated pins for long lasting and strong grip and rubber dipped handle grip for comfort.
  • ★Note:Please allow 1-3 cm difference due to manual measurement.
Check Stock

S SATC Abrasive Wheels & Discs 4-1 2 Inch Flap Disc 10 PCS 4.5" x 7/8" 40 60 80 120 Grit Fast Cutting Speed Zirconia Alumina Grinding Disc for Angle Grinder Type #29

  • Various grit: This premium flap disc includes 4pcs of 40 grit, 2pcs of 60 grit, 2pcs of 80 grit, 2pcs of 120 grit. Different grades ranging from rough to fine can meet almost all your grinding requirements..
  • Durable: 4 1/2 flap disc provides long service life with industrial grade premium blue zirconia for strength, durability..
  • Application: Flap disc for angle grinder is effective for blending, smoothing, finishing flat surfaces, deburring and grinding contours. Abrasive grinding wheel is perfect for radius grinding on steel, sheet metal, welding, machining, heavy duty equipment and industrial maintenance..
  • Convenient: These flap discs are built in angle for greater contact on work surface..
  • Use with:  Each grinder sanding disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with most angle grinders. Max RPM is 13300..
Check Stock

Strip Disc Stripping Wheel for Angle Grinders Rust Remover Disc Remove Rust Paint Oxidation - Paint Stripping Wheel, Disc Stripping Wheel, Paint Stripping Disk 4\ x 5/8\ 10 Pack

  • ◼️【TOP-LEVEL MATERIAL-Stripping Discs Angle Grinder】: The angle grinder paint stripping wheel, Rust Stripping Wheel is made of high-strength wear-resistant fiber mesh as the base material, wear-resistant materials, long service life and the resin elastomer and diamond sand are organically combined with a special process..
  • ◼️【WIDELY APPLICABLE】: Rust remover wheel, brand new 10-piece set, specially designed for 4" and 5/8" spindle marking of various angle grinders on the market. Easy to strip discs clean & remove paint, rust and oxidation. The purple paint stripping wheel has better hardness than the black strip wheel grinder..
  • ◼️【STRIPPER DISC--PREMIUM PERFORMANCE】: Grinder stripping disc is suitable for various shapes to be peeled off by the grinding body, It does not damage the surface of the object, has uniform grinding force, dirt will not block the grinding surface. Strip wheel grinder wear resistance, strong water resistance, strong plasticity, and good softness..
  • ◼️【BEST MATCH SIZE--STRIP DISC】: Size of the angle grinder rust remover disc: Diameter 4.
Check Stock

GRAFF 6 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 150 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 6 Inch (150 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.055 Inch (1.4 mm) thickness..
Check Stock

GRAFF 4 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 105 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 Inch (105 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.091 Inch (2.3 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

GRAFF 4 ½ Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 115 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock