Top Ceramic Bearing Lubricant

ARCTIC P12 (5 Pack) - 120 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 1800 RPM - Black

  • OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators.
  • HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved.
  • INNOVATIVE DESIGN: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level.
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
  • TECHNICAL DATA: Fan speed: 1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 3-pin.
Check Stock

Fireball Dragon Roller Skate Bearings 16 Pack - High Performance Skate Rated Rollerblade Bearings - Dragon Roller Bearing Inline Skate Bearings, Guaranteed for Life (Ceramic Bearings)

  • CERAMIC BEARINGS 608 - 16 Bearings for 8 Skate Wheels (2 Skates).
  • RACE PRE-LUBED For Fast Rollerskating - Dragon Rollerblade bearings offer ultra smooth & long lasting performance with our signature skate lubricant formula. Bearings built to perform.
  • SET OF 16 BEARINGS - 608 bearings designed to fit 8 x roller skate, scooter, rollerblade, skateboard or longboard wheels. 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).
  • ULTRA SMOOTH SKATING - Manufactured from high grade steel w/ Nylon ball bearing cage (for reduced friction + a fluid roll) & 2 Rubber Labyrinth seals (for improved longevity and lubrication retention).
  • INCREASE YOUR PERFORMANCE - Dragon Rollerblade + Skate wheel bearings come w/ our signature Dual-Labyrinth Shields, designed to keep dirt / debris out, improving bearing lifespan up to 50%! See image.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 100-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 2-3/4\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2\ Bore, 5-1/8\ Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 108-FM Ball Bearing Flange Unit, 4 Bolts, Eccentric Collar, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 4\ Bolt Hole Spacing Width, 5310lbf Dynamic Load Capacity

  • Cast iron flanged housing for vibration damping and structural rigidity.
  • Double-sealed, deep-groove ball bearing insert with an extended inner ring for applications with radial, thrust, and combined loads.
  • Acrylonitrile-butadiene rubber (NBR) contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Eccentric locking collar for securing the bearing onto the shaft.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 104-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/4\ Bore, 3-5/8\ Bolt Hole Spacing, 5730lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

SKF F4BM 300-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 3\ Bore, 6\ Bolt Hole Spacing, 16360lbf Dynamic Capacity

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

Fireball Dragon Skateboard Bearings 8 Pack - Fast 608 Longboard Bearings Set fits Skateboards Inline & Roller Skates - Precision Made & Guaranteed for Life Race

  • RACE PRE-LUBED FOR FAST SMOOTH SKATING - Ultra smooth and long lasting performance with our signature skate lubricant formula. These bearings are....
  • ULTRA SMOOTH - Unlike competitors, Dragons are made from high grade steel, w/ Nylon ball bearing cage (reduced friction & a fluid roll) & 2 Rubber....
  • INCREASE PERFORMANCE - w/ our signature Dual-Labyrinth Shields, designed to keep dirt/debris out & maximum lubricant retention. This helps improve....
  • 8 x 608 BEARING SKATE RATED BEARINGS manufactured to +/- 0.008mm. 1 Set fits 4 wheels. Order 2 sets for inline roller skate use. Specs - 22mm (outer....
  • LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your skateboard bearing. The perfect worry-free upgrade to....
Check Stock