Top Ceramic Discs

Front and Rear Brake Kit, Drilled and Slotted Brake Rotors Ceramic Brake Pads Suitable for CADILLAC ESCALADE SILVERADO 1500 TAHOE GMC YUKON

  • ★Performance Improvement★ The brake discs rotors use drilling and slotting technology, which can not only enhance the dust exhaust function, but also improve the heat dissipation performance and keep stable in braking..
  • ★Ceramic formula★ The brake pads use ceramic formula, which is clean, and no noise during braking..
  • ★Most competitive★ Competitive price and guaranteed to perform better or equal to OE parts..
  • ★Notice★ Note-Please read the description and compatibility chart before you place an order. Please contact us at any time if you have any question..
  • ★Includes★ 2x Front Drilled & Slotted Disc Brake Rotors（Front rotor size 330mm）.
  • 2x Rear Drilled & Slotted Disc Brake Rotors（Rear rotor size 345mm）.
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...utting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 2 inches in diameter and 3/64 -inch thick with a center hole of 1/8 inch, with a maximum speed of 30,000 RPM, and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...utting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 1/2 inch in diameter and 3/64 -inch thick with a center hole of 1/8 inch, with a maximum speed of 45,000 RPM, and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...utting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best results use with Gyros Stainless Steel Mandrel SKU 80-18100. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010..
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 3/64 -inch thick with a center hole of 1/8 inch, with a maximum speed of 42,000 RPM, and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • ...– Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 12 high-quality cutting wheels which are 1 1/2 inch in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 45,000 RPM and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12

  • ...– Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 12 high-quality cutting wheels which are 2 inches in diameter and 1/32-inch-thick with a center hole of 1/8 inch, with a maximum speed of 30,000 RPM and includes 2 size-specific stainless-steel washers. A must-have rotary tool accessory for all your cutting and grinding needs..
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • ...nd break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. For your safety - always use cutting discs with the GyrosGuard Safety Shield SKU 50-25010.
  • Multi-Set Value Pack – This multi-pack of small cut-off discs contains 2 high-quality cutting wheels which are 1 3/4 inch in diameter and 1/32-inch-thick with....
Check Stock

OKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite

  • 【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
  • 【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
  • 【Applicable type】：Concrete cutting machine saw blade can be used for dry/wet cutting.
  • 【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
  • 【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.
Check Stock

Cutting Wheel Set, ZFE 74Pcs HSS Circular Saw Blades Diamond Cutting Wheels 10pcs, Resin Cutting Discs 50pcs, 1/8\ Mandrel, Screwdrivers for Rotary Tools Cutting in Wood, Plastic, Metal

  • 41pc Set Includes (30) Diamond Cutting Wheels, (6) Mandrels, (5) Diamond Grinding Burs (1/8" Shanks).
  • Cuts And Grinds Tile, Stone, Glass, Metal, Concrete, Ceramic, Grout, Fiberglass, Wood, And More.
  • COMPATIBLE WITH: Dremel Tool, Rotary Tools, WEN, Die Grinders, And Drills With 1/8" Collet / Chuck.
  • Diamond Cut Off Wheels Are Great For Tile Cutting, Masonry Work, Glass Cutting, Notching, And More.
  • Diamond Cutting Discs Come With 6 Mandrels (1/8" Shank).
  • Diameter of Cutting Discs: 22mm (About 1").
Check Stock

Detroit Axle - Front 321mm & Rear Drilled Slotted Rotors + Brake Pads Replacement for Chevy Malibu Impala Buick Allure LaCrosse Regal - 10pc Set

  • Models With Vented Rear Discs and 321mm Front Brake Rotors.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Drilled & Slotted Rotors + 2x Rear Drilled Slotted Rotors + 2x Front Ceramic Brake Pads + 2x Rear Ceramic Brake Pads + 2x Brake....
  • Drilled & Slotted Disc Brake Rotors (Up To 20% Better Braking Power than Standard Rotors ) - Zinc Dichromate Plating (Rust Protection).
Check Stock

Bosch Professional 2608615134 Diamond Cutting Disc Best for Hard Ceramic X-Lock Diameter 115 mm Bore Diameter 22.23 mm

  • Diamond cutting discs X-LOCK - Best for Hard Ceramic.
  • Perfect for use in hard porcelain stoneware, tiles, ceramic tiles (also glazed) and stoneware.
  • Also suitable for use in roof tiles, granite, natural stones and cement bonded fibreboard.
  • X-LOCK accessories are compatible with angle grinders with X-LOCK mounting, as well as with angle grinders without X-LOCK mounting of all brands..
  • Diameter: 115 mm, bore diameter: 22.23 mm, cutting width: 1.8 mm, segment height: 10 mm..
Check Stock

20" Mesh Sanding Screen Silicon Caribde 80 Grit, 10pk

  • Hardwood Flooring, Ceramic Tile, Concrete Flooring.
Check Stock