Top Ceramic Guide For Drilling

Dry Diamond Drill Bits 1/4" 6mm Diamond Hole Saw for Ceramic Porcelain Tile Glass Stone Marble Granite,Masonry Drill Bits Vacuum Brazed Diamond Core Drill Bit Kit for Bottles,Pots

  • 【DRILLING NEEDN'T WATER 】:Tile drill bits can be used without water,because tile dry diamond drill bits integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • But water can be used as additional cooling to prolong the life of tile drill bits.
  • 【Apply to】:The diamond drill bits Great for drilling clean holes to hard materials especially tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick, Note: not for wood.
  • 【Wide compatibility】Diamond coating enhances the drilling speed.
  • Ceramic tile drill bits is hex shank which is compatible with electric drill,hand drill,bench drill, angle grinder and vacuum brazed diamond technology provide more durable and long life.
  • 【SUSUMU SERVICE】:If you are not satisfied with our porcelain tile drill bits, please contact SUSUMU, will be 100% MONEY BACK GARRANTEE.If you are not satisifed with diamond tipped drill bit, you could return diamond tip drill bit for a full refund without hassle.Buy with confidence and complete peace of mind..
Check Stock

35mm Concealed Hinge Jig Kit, Woodworking Tool Drill Bits Hinge Drilling Hole Router Jig for Cabinet Cupboard Door Installation

  • Hinge punching locator: This hinge drilling hole router jig kit is the most useful tool for using concealed hinges for your doors..
  • ABS plastic material: 35mm hinge drilling jig is made of high quality engineering plastic, this hinge hole drill guide is durable. This is a set of drill guide tool used for convenient hinge hole drilling, light and portable, easy to operate..
  • Easy to use: Suitable for their own home operation, do not need professionals. Simple to use with any drillno special tools needed. Make cabinet door installation easy..
  • Efficient high precision drilling: You may speed up 50% comparing with the traditional drilling method and can make all flat-bottomed holes of the exact size..
  • Application: 35mm hinge drilling jig comes with a 35mm forstner bit and depth stop. The concealed hinge jig is suitable for 35mm hinges..
Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ☺[15 Pcs 16mm to 3mm (5/8" to 1/8") Masonry Drill Bits, More Quantity, More Size] Masonry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
  • ☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry ....
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

Rubi Tools DU-200 EVO 650 Rail Saw (26" Cut) 8" Diamond Blade

  • HIGH QUALITY, DURABLE Diamond Coated Hole saw Tool 6-5/8 inches Diameter, PROFESSIONAL Quality Tool for Drilling Holes in Tiles, Glass, Marble, Granite, Ceramic, Porcelain.
  • STANDARD 3/8 inch Shank Use with standard electric or cordless drill - Commercial Drain Installation.
  • VERY RARE SIZE for Commercial Drain Installation - ACTUAL hole diameter may be 1/8 inch larger than 6-5/8 inches depending on the material removed..
  • Use water as coolant to prolong the tool life, use a wood guide these tools do not need a center pilot drill. DRILAX Quality - We are here to help..
  • SAVE BIG for DIY Kitchen, Bathroom, Shower, Faucet Installation Projects.
Check Stock

1 inch Diamond Hole Saw 3/4 inch Diamond Hole Saw 1/2 inch Diamond Drill Bit 3 Pcs Set Quartz Granite Marble Ceramic Porcelain Glass Tiles Bottle Terracotta Clay Flower Pot Drain Holes 3 Pieces Set

  • 3 PCS SET of Triple-Layer Diamond Coating for Enhanced Performance - 1 inch, 3/4 inch, and 1/2 inch Sizes. Packed in air tight PVC wrap..
  • FOR ALL DIY PROJECTS: Drilling Holes in Tiles, Glass, Fish Tanks, Flower Pots, Quartz, Marble, Granite, Ceramic, Porcelain, Bottles, Clay..
  • Drain Holes for Flower Pots, Installing Faucets, Pipes for Renovating Kitchen, Bathroom, Shower, and much more.
  • Easy to Use STANDARD 3/8 inch Shank for all STANDARD electric or cordless drills, handheld or upright..
  • We recommend using water for cooling. You can start drilling at an angle and go upright. Or you can cut yourself a template out of scrap wood and clamp the guide to the working surface..
Check Stock

Gogonova Rotary Tool Kit

  • ✅【6 Variable Speed Settings】- This rotary tool has 6 variable speeds from 10000 to 35000RPM, adjusting speeds as you need to handle most your basic or tough crafting projects, ideal to work on most materials like wood, glass, metals, ceramic, tile etc..
  • ✅【3-Jaw Universal Chuck】- Technical improvement with 3-jaw keyless chuck enable every quick changes of accessories without wrenches. Unique torque thrust bearing of this rotary tool is easy to handle applied translate into greater clamping force, effectively preventing loosing off, more reliable..
  • ✅【4 Extra Attachments】- Every DIYer deserve better. GoGonova rotary tool kit support you with Flex Shaft for precise engravings, Detailer’s Grip for steadily holding, Cutting Guide/Drill Locator to avoid over-drilling.
  • Protective Shield keeps you out of reach of spark..
  • ✅【Safety First】- The rotary tool designed with several vent holes to continuously dissipate the heat. Moreover, the overload protection system would stop the motor in case of unanticipated situations..
Check Stock

AUTOTOOLHOME Gold Self Centering Doweling Jig Kit 2 inch 6PC Drill Guide Bushings Set Adjustable Width Wood Dowel Jig Woodworking Joints Tools

  • ...elf centering doweling jig can be used to make accurate butt joints ,miter joints and edge joints,as well as acting as a mortising guide..
  • It can be used on boards of different thicknesses(clamping wide capacity: 3/8" to 2"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture.make some shelves, cabinets, desks, tables, repairing doors ,installing railings..
  • The two pressing blocks are made of aircraft grade aluminum, surface is anodized for Gold color and does not easily leave scratches. Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The pressing blocks and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

Muzata Drill Guide for Cable Railing Kit Lag Screw Fitting Wood Post Installation, Fit 90 Degree Horizontal Deck and 45 Degree Angled Stair, Visible Drilling Template Jig, Patent Design CT10,CT1

  • Accurate and Multi-Angle – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 45 degree angled holes for the wood railing posts. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes – This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 1/4”, 5/16”, 3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4” drill fit most 1/8″ cable railings lag screws. You can fix the steel sleeves by tightening the anchor screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System – We pre-designed a cable railing system to help you construct a beginner-friendly wood system. It includes 1/8″ togg....
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Multi-Angle Drill Guide Attachment Mobile Drill Stand Portable 45 Degree Adjustable Angle Drill Press Machine Stand Guide Rail Base

  • Adjustable angle drill machine stand is composed of rotatable double guide rods, which can be adjusted to accurately drill holes at an angle of up to....
  • Multi-angle drill guide rod itself has a spring, which can be quickly reset when repeated drilling.
  • A drill guide that can be used in horizontal, vertical or angular position, perfect for straight or angled drilling, drilling on the edge of a board....
  • With 4 screw holes, it is convenient to use as a fixed drill floor with depth limiter, easy to use.
  • Mobile Drill Stand is made of high quality steel and aluminum, strong and durable, high strength, long service life.
Check Stock