Top Chamfer Cutters
Inch External Chamfer Inspection Tool Chamfering Welding Gauge
- [FUNCTION]External Chamfering Inspection Tool can measure internal or external chamfer.
- [MEASUIRING RANG]The External Chamfer Tool is in metric reading system, can measure of 0-2in, 1/32in increments,+-1/64in accuracy.
- [EASY TO READ]All measuring scales of Chamfer gauge are engraved by laser on the gauge, which is not only clear and easy to read, but also can effectively reduce the wear in the use process.
- And the back of the inspection tool has a sketch of how to use laser engraving.
- [MATERIAL]The Chamfer Tool made of stainless steel is not easily bent and corroded, which can effectively extend the service life.
- [PORTABLE]The Chamfer Gauge is designed to be lightweight and miniature, you can carry it to any workplace, such as workshop, laboratory, etc.
Check StockFrankford Arsenal Platinum Series Case Trim and Prep System with Hardened High Speed Steel Chamfer Debur Tool and Primer Pocket Scrapers with Trimmer
- EASE OF USE: Trimmer indexes cases on the shoulder for speed and precision.
- VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby.
- DURABLE: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance.
- BE PREPARED: Built-in storage box holds extra tools and keeps everything ready and organized.
- INCLUDES: Inside chamfer tool, deburr tool, large and small primer pocket cleaning tools and a trimmer with 3 collets and 6 shoulder bushings.
Check StockDIY Guide to Painting and Wallpapering: A Complete Handbook to Finishing Walls and Trim for a Stylish Home
- SPECS: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance, 240 volt model is compatible with European electrical outlets.
- INCLUDES: Inside chamfer tool, deburr tool, large and small primer pocket cleaning tools, and a trimmer with 3 collets and 6 shoulder bushings.
- VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby.
- EASE OF USE: An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired length.
- BE PREPARED: Built-in storage box holds extra tools and keeps everything ready and organized.
Check StockAR-PRO 6 Pack Tree Felling Wedges with Spikes for Safe Tree Cutting – 5.5” Wedges with Storage Bag; 6 Felling Dogs to Guide Trees Stabilize and Safely to Ground for Loggers and Fallers
- Replacement Worx 14" Chainsaw Chain for WG305, WG305.1.
- Ramp-shaped depth gauges help reduce kickback without affecting performance.
- Bumper Drive link delivers low-kickback performance.
- Chamfer Chisel cutters' twin cutting corners offer outstanding performance, durability and easy maintenance..
- Vibe-Ban chassis design reduces vibration 25% or more at the handles..
Check StockCutting tools, Multi Angle Miter Shear Cutter Cuts 45 to 135 Degree Miter Snips Cutting Tool ,Best Utility scissors (Miter shears)
- ✂【WIDELY USED】 Miter snips cutting tool for cutting plastic tubing,shoe moulding and most soft items, household decoration, making picture frames, daily tasks work activities or even DIY projects..
- ✂【PREMIUM STAINLESS STEEL】Solid steel frame with plastic cover handle, comfortable to grip miter snips.They’re also known as shear scissors, chamfer, trim, and quarter round cutters..
- ✂【GOOD PERFORMANCE】45 Degree To 135 Degree, nice and clean cut, with no burrs. Big open mouth design and with clear marking to adjust to the angle you want, for easy and accurate operation..
- ✂【STRONG & EASY TO OPERATE】Miter cutter has a built-in stencil for angle cuts. It cuts smooth and clean..
- ✂【QUALITY AFTER-SALE SERVICE】If you are not satisfied, you can refund unconditionally..
Check StockKONIBN Metal Deburring Tool Kit Deburr Cutters Set, Rotary Deburr Blades Set Burr Remover Hand Tool for Wood/Plastic/Aluminum/Copper/Steel
- Deburring Tool Set:NB1100 anti-slip handle with a blade,10pcs extra BS1010 deburring blades.Value pack for a long time using..
- Wide Application:Deburring cutters set works perfect on metal,steel,copper,aluminum,plastic,PVC,tin,trunking,etc.
- Function:The deburring tool can remove leftover burrs,cuts rounded over chamfer in the material and reduces the risk of injury.A must-have hand tool.
- Sharp and Durable Blades:The blades adopt tempered high-speed steel,extreme sharpness and hardness.Single blade can be used hundres of times.
- Anti-slip Comfortable Handle:Grips made of ABS material,length 12.5cm(4.9inches),ergonomic desgin,comfortable and secure when using it.
Check Stock3 Inch 150 Grit Flat Diamond Grinding Wheel Cutter Grinder Power Tool with 1/2' Bore for Grinding Hard Alloy, Glass, Tiles and Ceramics 78x12.7x10mm
- Diameter x Bore Diameter x Thickness: 78mm/Approx.3" x12.7mm/Approx.1/2" x 10mm.
- The diamond sand is evenly attached and wear-resistant, and it is not easy to drop sand.Good shape retention, strong grinding capacity, precision machining and high grinding efficiency..
- Mainly used for grinding hard alloy, tungsten steel milling cutters, also can be used for glass, tiles, gems, ceramics, molds and other materials edge grinding and chamfer. And mainly applicable to small side grinding machine, grinder..
Check StockArrows Before Bullets (8-Bit)
- Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
- Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
- High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
- Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
- Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....
Check Stocktallox 3 18 inch Chainsaw Chains .325 Inch Gauge .063 Inch Pitch 68 Drive Links Full Chisel fits Stihl
- Fits these chainsaw models: Craftsman - 315.341300, 79240 & 79245 Pole Saw, 358.34550, CR2500A Cordless, 315.34131 Husqvarna - 436 LI, T536 LiXP, 536 LiXP Echo - CS-271, PPT-2620, PPT-2620H, PPF-2620 Ryobi - P540, P540A, P542, P543, P545, P546, P547, RY52003.
- Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 40 drive links.
- Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
- Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
- Made in the U.S.A. - Limited Lifetime Warranty.
Check StockFrankford Arsenal Case Trim and Prep Center European 240V with Hardened Steel Chamfer Deburr Tool and Primer Pocket Scrapers for Reloading (European Plugs only)
- SPECS: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance, 240 volt model is compatible with European electrical outlets.
- INCLUDES: Inside chamfer tool, deburr tool, large and small primer pocket cleaning tools, and a trimmer with 3 collets and 6 shoulder bushings.
- VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby.
- EASE OF USE: An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired length.
- BE PREPARED: Built-in storage box holds extra tools and keeps everything ready and organized.
Check StockOregon R52 AdvanceCut Chainsaw Chain for 14-Inch Bar -52 Drive Links – low-kickback chain fits Husqvarna, Echo, Ryobi and more
- Fits many chainsaws, including Ego CS1401, Husqvarna 120i, Kobalt KCS 4040-06, Harbor Freight Lynxx 63287, 64715, 64478, Makita XCU03, XCU04, & XCU08, Ryobi RY40502, RY405100 & RY40511, Worx WG384.
- Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance..
- For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 52 drive links. Made in the U.S.A. - Limited Lifetime Warranty.
- Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
- Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Check StockFlex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)
- The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
- Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
- Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
- Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.
Check Stock