Top Chamfer Gauge - BuyWiseBest.com

Arrows Before Bullets (8-Bit)

Chamfer Tool - keep your casings smooth and precise with the Hornady Case Prep Center 6-Blade Inside Diameter Chamfer Tool 050172. Designed to remove the burrs from the inside of a case mouth for consistent seating depth and reduces the chance of shaving material off when a bullet is seated.
Easy to Use Chamfering Tool Bit - after your cases are cleaned or if you are using new brass you will want to chamfer your cases for a clean smooth cut. This tool is threaded 8-32 so it will work in the Hornady Lock-N-Load Case Prep Trio, Case Prep Center or installed in the Universal Accessory Handle.
High Precision & Tough Durability - great chamfer tool bit for reloaders to help keep chamfers and deburrs square with the case mouth, eliminating slippage and reducing errors. Universal design works on all cases 17-45 cal.
Remove the Burrs Inside - when there are sharp edges on your brass after trimming, you need to cut them down with this brass chamfer tool. This tool easily removes burs from the case mouth allowing you to seat the bullet without having to worry about the bullet being damaged.
Hornady Case Prep Center - with many different options for case prep reloading, Hornady has an option for you. Find the right reloading tools and accessories to compl....

The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.

Chamfer-cut medium blunt nipper has 8mm long jaw with angled head for flush-cutting applications on up to 14 gauge (1.6mm) copper and soft wire.
21-degree angled cutting surface eases access to board for cutting soft wire in component-dense areas.
HRC 58-rated 3.0mm heat-treated carbon steel construction provides durability and long life.
Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.
Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

2 Pack, Oregon 90PX055G Low Profile 3/8-Inch Pitch 0.043-Inch.
Low-vibration chamfer chisel cutters have an angular shape with twin cutting corners for excellent performance and edge-holding durability.
Recommended Bar Lengths: Up to 16in. (40cm) Recommended Saw Sizes: Up to 42cc.
Always install 90PX chains on a .043" gauge Double Guard bar (MLE part numbers) to obtain all the advantages of the Micro-Lite system.

Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..

【Easy Operation】: This 45-degree mini chamfering machine air tools has a new lightweight design, Two right-angle cutter heads and bearings have been installed on the machine, and two R-angle cutter heads are also equipped.Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
【Stable Speed】: This portable trimming chamfering tool can withstand high impact and high speed. The speed is increased and the chamfer is smoother with US 1/4 inch metal filter, free speed: 30000 RPM, air consumption 0.4/min..
【Durable】: Pneumatic chamfering tool with 1-5 air intake adjustment, freely adjust the gear speed you need. The safety switch is used to prevent accidental touch to protect the user's safety at all times. Use the matching wrench to easily adjust the chamfer size and replace the blade.Can be easily operated with one hand..
【Higher Efficiency】: The upgraded version of the metal beveling grinder, the new design adopts a new chrome-plated all-aluminum shell with high-quality bearings and blades for smoother deburring and chamfering..
【Application】:JIUNENG's air beveler tool adopts the thinnest nut lock bearing at present, which can chamfer in the narrowest and shallowest space, an....

Fits these chainsaw models: Craftsman - 315.341300, 79240 & 79245 Pole Saw, 358.34550, CR2500A Cordless, 315.34131 Husqvarna - 436 LI, T536 LiXP, 536 LiXP Echo - CS-271, PPT-2620, PPT-2620H, PPF-2620 Ryobi - P540, P540A, P542, P543, P545, P546, P547, RY52003.
Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 40 drive links.
Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments.
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance.
Made in the U.S.A. - Limited Lifetime Warranty.

Two-piece construction with two cutting edges in each piece.
One side has a 2 to 3 thread chamfer for threading.
the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
Unified and American National thread form standard.

Two-piece construction with two cutting edges in each piece.
One side has a 2 to 3 thread chamfer for threading.
the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
Unified and American National thread form standard.

Two-piece construction with two cutting edges in each piece.
One side has a 2 to 3 thread chamfer for threading.
the other side has a 1 to 1-1/2 thread chamfer for threading close to a shoulder.
Unified and American National thread form standard.