Top Chemical Hose Fittings

D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

Brass Barbed Tee 3 Way Fitting 1/4 inch by 1/4 inch by 1/8 inch Hose Connector fittings for air fuel water lines 1

  • Lead Free Brass See photo for materials composition report.
  • Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
  • They are commonly used for low-pressure applications in the food and beverage, marine, and chemical processing industries to convey air, fluids, and chemicals through a pipe system..
  • Ideal for quickly connecting polyethylene tubing for use in environmental pneumatic controls and other low-pressure applications with water and air..
  • Hose barb fittings are used most often in applications where we're using soft tubing. That could be beverage dispensing. That could be running an airline to your fish aquarium for your air filter. That could even be a low-pressure re-circulating pump on your aquarium as well. In a nutshell, hose barb fittings are used almost anywhere you use soft-side tubing and not in a high-pressure application. They make things versatile, very easy to use..
Check Stock

ANPTGHT 5/16 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

  • 【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
  • 【Size】5/16"Barb x 5/16"Barb x 5/16"Barb, Can be connected with 5/16" Hose ID..
  • 【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • 【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
  • 【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..
Check Stock

ANPTGHT 1/4 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

  • 【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
  • 【Size】1/4"Barb x 1/4"Barb x 1/4"Barb, Can be connected with 1/4" Hose ID..
  • 【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • 【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
  • 【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..
Check Stock

ANPTGHT 3/8 Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air

  • 【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability..
  • 【Size】3/8"Barb x 3/8"Barb x 3/8"Barb, Can be connected with 3/8" Hose ID..
  • 【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • 【Applicability】 Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi..
  • 【Usage】 Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc..
Check Stock

DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

Plastic Quick Connect Male/Female Coupling Connector 3/16'' Hose Barb Insert 3 Set/Pack

  • Quick-Disconnect Fittings, Straight-Through Hose barbs.
  • Suitable for 4mm-5mm Inner Diameter Tube.
  • Subject Material: POM Sealing ring material: EDPM.
  • Suiltable for a wide variety of applications in pharmaceutical, food and beverage, labaratory, chemical.
Check Stock

Plews / Edelmann Amflo 24-25E-RET Polyurethane Recoil Air Hose - Lightweight, Non-Marring, Extreme Cold Flexible, Self-Storing, Ideal for Home, Shop, or Industry, 1/4\ X 25' Blue

  • SELF-STORING RECOIL HOSE: Retains its self-coiling properties.
  • No wasting time coiling hose for storage.
  • NO MARKS, NO MESS: Smooth, non-marring finish.
  • Ideal for indoor finishing work, won’t cause damage to painted surfaces, wood flooring, trim, and laminates.
  • COLD WEATHER FLEXIBILITY: Polyurethane hose is perfect for year round use in temperatures as low as -30 degrees F.
  • BUILT TOUGH: Oil and chemical resistance.
  • Reinforced braided nylon make this hose a great choice for harsh environments like automotive repair shops and industrial facilities.
  • WON’T TWIST OR CRIMP: 1/4 inch NPT swivel fittings to reduce twisting, rugged PVC bend restrictors prevent damage to hose ends, 120 PSI working/480 PSI burst pressure, -30 to +150 temperature range.
Check Stock

Drip Irrigation Kit,100ft 3/8" & 1/4" Mirco Irrigation System,Automatic Garden Watering System for Plant,Sprinkler System Kit,Indoor Outdoor Automatic Watering Misting Supply for Raised Bed Greenhouse

  • ...r saving water in drought conditions. The drip irrigation kit provides plant’s roots with slow, steady moisture.The atomizing nozzles can also be used as misting cooling system..
  • Weather & UV Resistant Watering System: The tubing hose is made of highly durable UV and chemical-resistant materials. And all of the fittings are made from high-quality ABS plastic which assures long service life..
  • Easy Installation Irrigation Kits: Without digging or plumbing skills, simply cutting the hose, connect the barbed fittings with nozzles, emitters or drrippers, an user manual included to show how to install clearly. Tips: Soaking the end of the tubing in hot water for a minute before pushing the fittings on..
  • Versatile Uses: The drip irrigation kits provide a cool heat environment for outdoor areas, which is very suitable for agriculture, lawns, gardens, greenhouses, terraces, greenhouses, swimming pools and fog cooling irrigation..
Check Stock

1 1/2 IN x 100 FT Pool Backwash Hose, Heavy Duty Flat Discharge Hose, Weather and Burst Resistant, Best Pool Hoses for Inground Pools, Pool Filter Hose & Pool Drain Hose

  • ⛳ Heavy Duty Pool Hose- High pressure resistance, weather and chemical resistant, aging resistant, wear resistant, ideal for water transfer. Essential pool supplies as pool drain hose, pool pump hose, pool filter waste hose..
  • ⛳ High Quality Material Made – Pool discharge and backwash hose is made of PVC material, the material is resistant to abrasions and corrosion. Reinforced with 3-ply polyester yarn to prevent leaks and tears for durable use..
  • ⛳ Discharging Hose Detail – Inside Diameter: 1.5inch.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Hose fits 1.5” hose fittings, if connected to the 1.5” PVC pipe, please select a larger hose size..
  • ⛳ Easy to Use – Widely used in in-ground and above-ground pool equipment, easy to fit over a 1.5” or less filter outlet. After use, simply flat rolled up and store in a dry place out of direct sunlight for storage..
  • ⛳ Excellent Customer Service – Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock

Justrite 12847 VaporTrap Carboy with Filter Kit, 70mm, 20L, 8 Ports

  • 70mm cap, 6 ports for 1/8" OD tubing, 1 port for 1/4" or 3/8" hose barb.
  • Tube fittings secure waste tubes to carboy providing a closed system preventing leaks or spills.
  • Two-piece cap design eliminates the need to disconnect tubing from the adapter to install a closed cap.
  • Ergonomic high-density polyethylene UN/DOT container provides excellent chemical compatibility.
Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

  • Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
  • Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
  • Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
  • Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
  • Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock