Top Chip High Frequency Inductors

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

  • L-C-R soundbar, Slim design, Binding Posts: Push style.
  • High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
  • Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
  • Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
  • Frequency Response: 120–23,000 Hz ± 3 dB.
  • Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
  • Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
  • Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
  • Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".
Check Stock

Mega Electronic Component Kit Assortment, Capacitors, Resistors, LED, Transistors, Diodes, 1n270 Germanium, DC Jacks, opamp, PCB, Speaker, 1900 pcs

  • 【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
  • 【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
  • 【Feature】 this Choke Inductor Has Special Guide Pin Structure.
  • Not easy to produce open circuit phenomenon..
  • 【Specification】 1uh to 220uh 1MH to 20MH.
  • The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
  • 【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.
Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

  • Features: JBI JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
  • Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
  • Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
  • Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low....
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

JBL Professional JRX212 Portable 2-way Sound Reinforcement Loudspeaker System, 12-Inch

  • JBL 12-Inch low frequency driver with a 2.5-Inch diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling..
  • JBL 2414H-C 1-Inch polymer diaphragm compression driver improves high frequency performance as well as system reliability..
  • The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region..
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating..
  • Non-resonant, all-steel handles are used..
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
  • Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage..
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Thometh Multitester-MLC500 LC Meter 500kHz Digital Capacitance Inductance Meter Auto Ranging Component Tester, Black

  • UNI-T UT622A LCR meter features high accuracy, fast speed, and long standby time. 99,999 maximum reading with accuracy up to 0.1%. Test frequency (100Hz, 120Hz, 1kHz, 10kHz). Test signal level (0.1Vrms, 0.3Vrms, 1Vrms). Maximum test speed: 20 times/s. Constant 100Ω output impedance. Auto LCR..
  • 2.8-inch TFT LCD display. High-brightness white backlight. Data hold. Recording mode. Standard Mini-USB communication interface. SCPI command set. Perfectly fit the measurement and screening of inductance, capacitance, and resistance in production lines, maintenance points,etc..
  • Built-in rechargeable battery with large-capacity. 8h long battery life. For evaluation of resistance, parameters of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, network components, circuit boards, relays, switches, cables, batteries, etc..
  • Reliable & Easy to Use. LED alarm for tolerance. Certified CE and RoHS. What you get: 1 x UT622A LCR meter, 1 x power adapter (5v/1a), 1 x UTR-002 Alligator clip test leads with rubber plugs (pair), 1 x UTR-001 plated short circuit board, 1 x USB cable, 1 x paper manual (En), 1 x gift box..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by ....
Check Stock

Cermant 240 Pcs 24 Values Inductor 2.2uH-100mH DIP Radial Power Choke Inductors Electrolytic Capacitor Assortment Box Assortment Kit for TV, LCD Monitor, Radio, Stereo, Game

  • Feature: The choke coil inductors are of small distributed capacitance and high self-resonance frequency.Small vertical inductors occupy less space..
  • Easy to Use: 240pcs 24 Kinds Different Electrolytic Capacitors, All of the capacitor is marked the value, easy to distinguish..
  • Secure & Reliable: The inductor coil is protected with Insulated pipe to ensure stable performance,Great value for money..
  • .Durable & Longlasting: This choke inductor has special guide pin structure.
  • Not easy to produce open circuit phenomenon.
  • Type:2.2uH,3.3uH,4.7uH,6.8uH,10uH,15uH,22uH,47uH,68uH,100uH,150uH,220uH,330uH,470uH,680uH,1mH,1.5mH,2.2mH,3.3mH,4.7mH,10mH,20mH,30mH,100mH.
Check Stock

KLH Model Five 3-Way 10-inch Acoustic Suspension Floorstanding Speaker - Each (Mahogany)

  • Dedicated midrange driver to reproduce the critical mid-frequency band.
  • Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments.
  • KLH cabinetry featuring a structurally reinforced ¾” MDF enclosure.
  • Thirteen component network using high-quality iron-core inductors & Mylar capacitors.
Check Stock