Top Chip Quik Smd291ax Solder Paste

Meguiar’s A3316SP Quik Detailer Mist & Wipe 16 Fluid Ounces

  • Ultimate spray wax with hydrophobic polymer technology creates a deep wet-look shine you would normally expect from liquid or paste waxes.
  • With relentless water-beading protection that lasts for weeks, Ultimate Quik Wax offers Meguiar’s longest-lasting protection from a spray wax.
  • Safe and effective on all painted surfaces without leaving a white waxy residue on exterior plastic or trim pieces.
  • Quik Wax is truly quick – simply spray on and wipe off for fast wax protection and gorgeous shine in less than 15 minutes.
  • The polymer-based wax can be applied in direct sunlight or on hot surfaces without streaking or leaving a white residue.
Check Stock

Soldering Practice Kit,3 Kits SMD SMT Weldering Skills Training Board(Soldering-All)

  • ✅3 SETS of SUPER VALUE.From easy to difficult SMD components soldering practice kit, high challenge PCB SMD welding skills competition..
  • ✅Professional skills, complete this kit, need a certain professional knowledge base, practical training experience..
  • ✅High quality material, high-quality double-sided spray tin FR-4 circuit board, easy to solder, not easy to oxidize, contribute to success..
  • ✅Technical support, including component list, circuit diagram, principle description and finished product diagram. Please contact us for information..
  • ✅Super quantity components: there are many kinds of components, nearly 20 different kinds of electronic components. There are more than 1400 solder joints and more than 500 components..
Check Stock

BEEYUIHF 1 lb Solder Wire and Rosin Paste Flux Kit 63-37 Rosin Core Welding Soldering Wire, for PCB Electrical Soldering, Net weight 475g, 0.8mm 0.031″

  • Solder paste weight: (1.62oz/46g) 30cc syringe Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin soldering paste,high purity,good helper for repairing and welding.Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies..
Check Stock

Hot Air Rework Station 110V SMD Soldering Station with Heat Gun Set Adjustable Hot Air Gun Holder °C/℉ Temperature LED Screen Display Hot Air Station for Electronics Repairing Desoldering Welding

  • Hot Air Rework Station - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs..
  • Soldering Station Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds (max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle..
  • Hot Air Station with ℃/℉ Digital LED Screen - LED digital screen displays show precise temperatures, every work state of the hot air rework station, Current Temperature, Standby and No handle insert (no detected heat core). Adopted PID program to monitor the temperature of the hot....
Check Stock

Youland Soldering Iron Tip Cleaner + 60/40 Solder Wire Reel Fine 0.6mm Tin Lead Rosin Core (1.76oz/50g) + Soldering Rosin Flux Paste Gel (0.35oz/10g) for Electronics Metalworking Welding

  • √ Ideal Choice for Soldering Accessories Kit —— Contains 3 of the most essential products for welding, saving you time of multiple purchases. NOTE: solder wire & flux were packed in the container.
  • √ Feature of Solder Iron Tip / Head Cleaner —— Sturdy metal container.
  • The Sponge made from brass coils, softer than the tip plating, yet harder than the oxidation that forms on the tip. Won't damage your soldering tips. To clean the tip, just stab the iron into the holder, great alternative to a wet sponge. No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
  • √ Feature of Solder Rosin Wire Core Tin —— Produced with international standard flux formula, Low melting point: 374℉ / 190℃.
  • Good activity, Stable performance, Stable performance, fast tinning.
  • fresh smell, less smoke, no toxic gases, less splashing when welding.
  • Solder joints are bright and firm, forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction.
  • low melting point high insulation resistance, reduced welding time.
  • √ Feature of Solder Rosin Flux Paste —— No-clean solder paste with minimal residue and no cleaning requ....
Check Stock

Antidious Fume Extractor Anti-ESD Solder Smoke Absorber Portable Filter for Soldering DIY Fan Extraction Equipment with Spare Activated Carbon for Brazing Welding Soldering, Fume Prevention Remover

  • - The solder paste is placed at 45 degrees and rotates along the axis line. The solder paste will no longer adhere to the lid..
  • - This machine adopts time relay control, simple operation, high reliability.
  • - The stirring tank does not need to be opened during the stirring process, and the tin paste will not be oxidized or absorb moisture.
  • - Reasonable design of speed ratio, avoid impact of tin powder and temperature rise too much influence on the quality of tin paste..
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

Harris SCLF16 Stay Clean Soldering Flux, 16 oz.

  • Nice Combination: the package comes with 1 solder wire, 1 no clean solder wicks, 1Soldering Flux & 6 welding auxiliary tools, enough quantity and practical toolset for welding and desoldering requirements.
  • 6 Welding Auxiliary Tools: To meet the welding operation requirements of press, cutting, scraping, hooks brushes, fork. Also, it can be applied to integrated circuit assembly and disassembly, precision electronic components.
  • Safe Rosin Paste Flux: Refined with weak acid flux, semi-solid, and not easy to pour. The most suitable flux for hobby and electronic assembly. Good for cables and large terminals. Removes oil or oxides, and improves wettability.
  • Solder Wick & Solder Wire: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive. Solder wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints.
  • Multifunctional Welding Kit: Ideal for repairs, auxiliary welding, and assembly work. For precision welding repair work such as fixing, removing, cleaning, etc., making the work easier.
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock

2900 pcs SMD 1206 0805 0603 Component Assortment Resistor Capacitor Diode Transistor OpAmp IC Solder PCB SMT Soldering Assorted Kit

  • Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit.
  • 1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED.
  • Everything comes in a compact case and very handy.
  • 13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB.
  • Includes a training dummy PCB with 70 components, practice your soldering skills.
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock