Top Chip Removal Tool

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Cuda 8.5’’ Titanium-Bonded Fish Hook Remover Tool (18835)

  • Fishing Hook Remover: The ultimate fishing tool, this specialized piece of fishing gear and equipment is engineered for safe and easy hook removal, making it a perfect addition to your fishing tool kit.
  • Durable Construction: Constructed from corrosion-resistant aluminum alloy, our fish dehooker tool features a titanium-bonded dehooking mechanism that will not flake, blister, chip, or peel.
  • Non-Slip Grip: Great for freshwater or small salt species, our dehooker comes equipped with dual Cuda scale pattern grips for a comfortable and incredibly secure grip in all conditions.
  • Easy To Use: Insert into fish’s mouth, wrap the dehooking mechanism around the hook, pull the handle, and the mechanism will grab the hook.
  • Remove tool from fish and release the handle to open the dehooking mechanism.
  • Fierce, Tough, Proven: The Cuda brand was designed with the strength, power and agility of the Barracuda.
  • Cuda fishing products are built for ultimate fresh and saltwater fishing performance and will continue to perform over time.
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • ...umatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,pneumatic fan clutch removal tool,pneumatic fan clutch,pneumatic fan clutch removal tool gearwrench..
  • The items are the same as the pictures.43300 for clutch fan removal tool,fan clutch removal tool,7.3 powerstroke fan clutch removal tool,air fan clutch removal tool,for cummins fan clutch removal tool,duramax fan clutch removal tool,fan clutch removal tool 36mm,fan clutch removal tool pneumatic.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

Makita KP0810 3-1/4\ Planer

  • Planes up to 3-1/4" Wide and 5/32" Deep in a single pass.
  • Two-blade cutter head with 16, 000 RPM delivers smooth finish and fast stock removal.
  • Chip ejection can be directed to either side of the tool for convenience.
  • Depth adjust knob features an easy-to-read scale with click stops in 0.1mm increments for precise depth adjustment.
  • Conveniently located lock-on/off button can be operated from either side of handle.
Check Stock

Engraving Milling Cutter, Highspeed Steel M2 Single Flute Milling Cutter for Machinery for Pure Aluminum Cutting for Industrial

  • Wide range of applications, can be used for pure aluminum cutting, aluminum alloy doors and window processing, plastic steel processing, etc..
  • Made of high‑speed steel M2, the blade tip is Ti plated, which has strong hardness and wear resistance, and can withstand greater impact..
  • Strict quality control and quality assurance, high safety factor, can be used with peace of mind..
  • Using CNC full grinding, the tool size is more accurate, and the performance is good..
  • Adopting single‑edge large chip flute design and special land, chip removal is smoothly, and the cutting is smoothly and free of burrs..
Check Stock

OEMTOOLS 25311 Automotive Window and Door Clip Remover and Installer, Auto Door Panel Removal Tool, Door Panel Clip Tool

  • VERSATILE: This clip removal tool works on a variety of different models including GM, Ford, and other vehicles using the “C” type clip.
  • You can use this auto trim removal tool set again and again for many different jobs.
  • PREVENTS DAMAGE: While trying to remove things like window cranks and window clips, it is easy to damage windows and doors.
  • You don't have to worry with this panel removal tool.
  • Our car clip remover will not cause damage to any car parts.
  • EASY APPLICATION: This fastener removal tool is easy to use.
  • Just slip the tool between the two pieces you are trying to separate such as the window crank and the door panel.
  • Wiggle the car door removal tool around, then, lift.
  • QUALITY MATERIALS: This car clip removal tool is composed of metal that won’t break or bend during use.
  • It is thin enough to reach in tight spaces and durable enough not to break.
  • Unlike plastic tools, this panel clip removal tool is built to last.
  • SPECIFICATIONS: This door panel removal tool measures 13.9” x 4.7” x 2.4”, making it easy to fit into tight spaces.
  • Because this tool only weighs 5.6 ounces, it is easy to carry around to different jobs or different areas in the same car.
Check Stock

Red Devil 4050CL Classic Scrape & Pry bar Silver

  • High Quality Steel: Drop forged and heat-treated 4140 steel wedge is perfect for prying or positioning of sheet metal. Originally developed for the aircraft industry, thin high strength wedge has become popular among car enthusiasts..
  • Panel Removal Tool: Great for high strength prying of car interior panels if used with care. Fits into any crevice and works flawlessly in removing exterior & interior trim, molding, wheel hubs, door panels, fastners, dashboards and more without scratching or marring your car..
  • Auto Trim Removal Tool: Extremely Strong thin tip with very little deflection. Superior to plastic pry tools. Ergonomically designed to fit well into your hand making it easy to access hard to reach places. Makes jobs a lot easier. You'll do things more quickly and efficiently with this pry tool..
  • Pry Tool: Great for separating templates used in Router Fabrication. Perfect for any mechanics or professionals doing car modifications. Compact size makes carrying in your pocket or storing it in your car anywhere..
  • Automotive Pry Tools: This magnificent door panel removal tool takes the place of the entire auto trim removal tool set or interior trim removal kits. Why burden yourself with an arsenal of useless plastic panel removal tools when this One....
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Milwaukee 49-56-0213 4-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • Ice hardened for up to 50% longer life than the competition.
  • Matrix ii bi-metal Teeth for greater durability.
  • Radiuses tooth back reduces stress on teeth.
  • Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock

Milwaukee 49-56-0223 4-1/4-Inch Ice Hardened Hole Saw

  • The product is manufactured in United States.
  • Ice hardened for up to 50% longer life than the competition.
  • Matrix ii bi-metal Teeth for greater durability.
  • Radiuses tooth back reduces stress on teeth.
  • Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
  • ICE HARDENED for up to 50% longer life than the competition.
  • Matrix II Bi-Metal Teeth for greater durability.
  • Radiused Tooth Back reduces stress on teeth.
  • Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.
Check Stock