Top Circular Saw Guide Jig

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • ...gh the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured..
Check Stock

Missvig Cosplay Wig Demon Slayer Short Gray White Halloween Wig Synthetic Hair Anime Custom Party Hair

  • Incremental trim feature makes tool-free adjustments by 1/16 inch.
  • Extends saw blade up to 9.5″ from edge of workpiece with Jigsaws.
  • Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
  • Cuts circles from 4″ to 19″ in diameter.
  • 4 metal bars and special clips accommodate most circular and jig saws.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

Makita XVJ02Z 18V LXT Lithium-Ion Brushless Cordless Jig Saw, XSR01Z 18V X2 LXT Lithium-Ion (36V) Brushless Cordless Rear Handle 7-1/4' Circular Saw, & BL1840B 18V LXT Lithium-Ion 4.0Ah Battery

  • Brushless jig saw features an ergonomically designed barrel grip which allows for closer-to-work control and more precise cuts.
  • Jig saw features a Makita-built brushless motor and 3 orbital settings plus straight cutting delivering faster and more accurate cuts in a variety of materials.
  • Brushless circular saw cuts 3X material in a single pass.
  • Brushless circular saw's X2 LXT technolgy delivers up to 558 cross-cuts per charge in 2x4 SPF lumber and up to 291 cross-cuts per charge in 2x10 SPF lumber using two 5.0Ah batteries.
  • BL1840B 4.0Ah battery features an integrated L.E.D. battery charge level indicator which allows users to monitor battery charge.
  • BL1840B battery provides up to 35% more run time per charge compared to BL1830 and reaches full charge in 40 minutes or less.
Check Stock

13.4inch Track Saw Square Guide Woodworking 90° Right Angle Circular Saw Guide Rail Angle Stop Accessories Compatible with Festool/Makita Guide Rail

  • 【Excellent features】 Designed with standard right angles, this circular saw guide ensures a high level of precision in woodworking. The circular saw guide system allows for quick and accurate setting of slicing or milling angles, allowing precise and repeatable 90-degree cuts with the guide without the need to readjust the angle for everyday use or work on your engraving needs..
  • 【UNIQUE DESIGN】The hollow design of the electric circular saw track makes it very light and easy to use, whether for daily use or to carry is very convenient.
  • 【Easy to use】Easy to install and disassemble, just a few steps to complete the installation without too many complicated steps. Use your electric circular saw for a perfect carving experience, a great tool essential for beginners..
  • 【High quality material】90-degree right angle guide made of aluminum alloy and stainless-steel material, with the characteristics of not easy to damage or bend, strong and durable, light weight.
  • 【PRACTICAL TOOL】Cutting machine fixing bracket for precise cutting of wood. Can be used as a clamping device fo....
Check Stock

Saw Guide Tracks for Circular Saws (12 Feet) – Durable Cross Cut Guide for Making Straight Cuts! Lightweight, Easy to Assemble Guide Rails for Woodworking! (Stone Coat Countertops)

  • INCLUDED IN THIS KIT - (3x) 47.75” Aluminum Saw Guide Tracks, (1x) Universal Circular Saw Mounting Plate, (1x) Mounting Hardware Pack.
  • MAKE PERFECT CUTS – Convert your circular saw into a high-performance, track-guided cutting tool with the Saw Guide! Make perfectly straight cuts every time! Save time and money on your next project with woodworking accessories from Stone Coat Countertops!.
  • DITCH YOUR TABLE SAW – No need to cut jumbo sheets of wood on a table saw! No need for an expensive crosscut sled! The Saw Guide will make your cuts cleaner, faster, easier, and more affordable!.
  • NO MORE WASTED MATERIAL - The Saw Guide gives you a clean, smooth edge every time! Break down sheets of MDF or plywood with ease! Less wasted material means you save more money!.
  • STRONG AND LIGHTWEIGHT – Aluminum Saw Guide Tracks are sturdy enough to stand up to any job! Lightweight enough to carry from one job site to the next! Great for woodworkers, professional contractors, remodelers, craftsmen, DIY enthusiasts, and so much more!.
Check Stock

GALAX PRO 4Amp 3500RPM Circular Saw with Laser Guide, Max. Cutting Depth1-11/16'(90°), 1-1/8'(45°）Compact Saw with 4-1/2' 24T TCT Blade, Vacuum Adapter, Blade Wrench, and Rip Guide

  • Powerful circular saw: 4-amp electric motor – delivers a no load speed of 3,500 rpm – easily cuts through wood, PVC tubing, laminate flooring, plastic, plasterboard and MDF. Includes an 24T Tungsten Carbide Tipped Blade 4-1/2 in diameter. Arbor Size: 3/8in.
  • Laser guide and bevel lever: This mini saw comes with laser beam guide and the scale ruler, which can assist you to cut a straight line for when high precision is needed. Accurate cuts are assured by the parallel guide and laser light. Angle adjustment for bevel cuts of up to 45°.
  • Depth gauge lever and dust extraction system: This mini circular saw can adjust the cutting depth anywhere from 0 to 1-11/16"(42.8mm) with a max. cut of 42.8 mm in order to adapt to perform better when cutting different materials. Leave your working area free of dust with the vacuum adaptor, for more precise cuts and helping you to focus on the task without the mess.
  • Compact & handy circular saw: Compact body and lightweight perfect for one-handed operation.
  • it features ergonomic soft handles for better hand-feeling and provides optimum cutting line visibility for tight detail work.
  • What you get: 1* Mini Circular saw, 1* 24T tungsten-carbide-tipped wood/plastic blade, 1* allen key for saw change, 1* rip guide, 1* v....
Check Stock

Cordless Circular Saw POPOMAN 20V 4-1/2 Mini Circular Saw with 2.0Ah Battery 1H Fast Charger 9.5 Base Plate Laser Guide Cutting Depth 1-11/16 90° 1-3/8 0°-45° Wood & Metal Cuts

  • Powerful Motor & 0-3500 RPM — High-performance motor of popoman cordless circular saw delivers 3500 RPM's for faster multi-purpose cuts of wood,....
  • Flexible 90°and 0-45°Bevel Cutting — The maximum depth of cut at 90°is 1-11/16”(42.8mm) and bevel capacity at 45 °is 1-1/8”(28mm) for a....
  • Laser Light & Parallel guide — To ensure a parallel cut, laser guide and parallel guide is available in our circular saw.
  • Ergonomic — Cordless - highly mobile, POPOMAN 4-1/2" circular saw is among the lightest saws in its class (4.8 pounds). Compact body and lightweight....
  • Compatible 20V Battery : The Cordless circular saw compatible with amazon TECCPO/POPOMAN 20V 2.0Ah Lithium Ion batteries. 1H fast charger delivers....
Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

  • Jig saw guide is fully adjustable to accommodate most jig saws.
  • Adjustable pointer guide keeps your cuts true.
  • Clamp Edge includes ruled edge for easy measuring.
  • Easy to change from cutting with the Clamp Edge guide to cutting freehand.
  • Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.
Check Stock

Cordless Mini Circular Saw, WESCO 20V 3-3/8'' Electric Circular Saw with 2.0Ah Battery and Quick Charger, Maximum Cutting Depth 1-1/8", Parallel Guide and Hex Wrench, 1 x 24T TCT Saw Blade for Wood

  • POWERFUL CORDLESS CIRCULAR SAW Features a 20V Li-ion battery to offer great power for fast cutting, 2.0A fast charger completes a full charge in 60mins. Blade size 3-11/32 inch, powerful speed for faster multi-purpose cuts of wood, soft metal, tile, dry wall, plastic and more with ease..
  • MINI CIRCULAR SAW CORDLESS ONE-HANDED OPERATION Small, compact size for excellent maneuverability and the included 20V battery maximizes portability. This compact & lightweight cordless circular saw (only 4.06 lbs) is half weight and half volume less than a regular 7-1/4" circular saw..
  • CORDLESS SAW ACCURATE CUTTING Parallel guide leads to cut in a straight line, so that it ensures a professional and precise cutting line, convenient for cutting. Dust port used for connecting dust vac to offer a clean work environment, sucking away all sawdust coming from the cutting..
  • CIRCULAR SAW CORDLESS SAFETY & ERGONOMIC Left-sided blade design for great cut-line visibility.
  • grip with integrated safety switch for comfort, balance, and control, promises a safer cutting job. Blade guard ensures safer cutting operations. Soft rubber handle designed to comfortably fit in hand for improved control with minimal vibration..
  • WHAT YOU GET 1* WESCO Cordless circular saw, 1* 2.0Ah Li-ion batte....
Check Stock

Magswitch Ultimate Thin Stock Jig Rip Guide - Tool Attachment for use with the Magswitch Workholding System

  • The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included).
  • Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch.
  • Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables.
  • This jig rip guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock, making it ideal for thin stock hold down or infeed/outfeed on a table saw.
  • The jig rip guide is built from strong and durable ABS UL94VO material for years of use. All required attachment hardware is included.
Check Stock