Top Citation Bars

50pcs PVC Rubber Pin Backs Butterfly Clutch Backings Pin Cap Keepers Replacement for Uniform Badges Comfort Fit Tie Tack Lapel Pin Backing Holder Clasp, Black

  • Size: 11mm/0.433inch in diameter, 7mm/0.276inch in height.
  • Made in PVC rubber, these soft rubber pin back provides good grip of pin, keep it stay in place.
  • Use for lapel pins, tie tacks, citation bars, service bars and jewelry, good for jewelry making and DIY craft projects.
  • Great replacement for pin clutch backs, these rubber pin backers are a must-have for your uniform, holding badges or name tags.
  • The PVC pin back is tight and they are not easy to fall off.
Check Stock

100 Pairs Tie Tacks Blank Pins with Butterfly Clutch Backs for Craft Making Silver

  • DIMENSIONS: Blank pins measure 10mm diameter with 9mm length. Butterfly pin clutch backs are 11mm in diameter. Each set comes with 100 blank pins and 100 Silver clutch backs..
  • DURABLE & HIGH QUALITY: Pins and clutch backs are made from nickel plated brass. Lightweight, sturdy and locks pins firmly to keep them secure. Handy and convenient replacements for your lost or damaged ones..
  • PRACTICAL & SECURE: Easy to use butterfly clutches with spring fastener slices provide a good grip on pins to hold them in place. Simply push pin post into clutch backs to secure. Press the twin butterfly triggers to release..
  • VERSATILE USAGE: Great for use with tie tacks or lapel pins that have lost their backings. Use them with badge insignias, citation bars, service bars and name tags. Perfect for jewelry crafting or any DIY crafts involving pins..
  • 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.
Check Stock

Aylifu Tie Tacks and Clutch Backs Set, 30 Pieces Metal Pin Backs Locking Pin Keepers with 30 Pieces 10mm Tie Tacks Blank Pins (Gold)- No Tool Required

  • PACKAGE INCLUDED -- 30 pieces metal locking pin backs and 30 pieces blank pins both in gold color, enough quantity for your daily use..
  • EASY-TO-USE -- With the spring-loaded fastener design, these pin backings are easy to put on and take off without a tool..
  • MEASUREMENT -- Each pin sizes is approx. 10 mm/ 0.4 inch in diameter, 9 mm in length, clutch pin back size is approx. 10 mm in diameter, 7 mm in height..
  • EXCELLENT DESIGN -- Pin backs and pin keepers are made of stainless steel, they are sturdy and colorfast, and the smooth surface prevent the skin from getting stuck injury..
  • EXTENSIVE USE -- Good replacement for lost backs badges, name tags, pins. Can be applied to tie tacks, lapel pins, badge insignia, citation bars, service bars, jewelry making and so on..
Check Stock

50PCS Metal Pin Backs, Pin Keepers Locking Clasp for Badge Insignia Pin Backs Replacement (Silver)

  • 【Small Size】: Pin backs diameter is 11mm, 7 mm in height. Sturdy and light, lock pins firmly and keep them secure..
  • 【High Quality Material】: Made of durable nickel-plated copper. Put the pin in the metal pin backing, your items will keep pinned securely..
  • 【Easy to Use】: Butterfly clutch with spring fastener slices allow you easy to install and remove, handy and convenient for use..
  • 【Widely Applicarion】: Pin clutch backs good for all lapel pins, tie tacks, badge insignia, citation bars and jewelry replacement..
  • 【Package】: Pack in the metal box easy to carry, including 50pcs pin backs, keep your brooch/ badge safe..
Check Stock

100 Pairs Butterfly Clutch, CBTONE Silver Metal Tie Tacks Pin Backs Replacement with Blank Pins for Craft Making, Badge Insignia, Citation Bars, Service Bars, Toy Pins and Jewelry Making

  • Durable & Secure - Tie tacks is made of nickel plated brass. Metal material makes it anti-wear. And these are incredibly sturdy and secure..
  • Replaceable - The package including 100 pairs tie tacks, enough for replacement to your torn or lost one, also good supplies for making DIY crafts..
  • Size - The blank pins size is 4.0 mm in diameter, 8 mm in length.
  • Clutch backs size is 11 mm in diameter. The gap between them is very small and tight clasp.
  • Easy to use - No tools required, the Butterfly clutch with spring fastener slices allow you to install and remove it easily. Great for pins keeps a tight hold on them..
  • Widely used - The blank pins and clutch back can be applied to tie tacks, badge insignia, citation bars, service bars, name tag, toy pins, jewelry making, DIY crafts, etc..
Check Stock

Rubber Pin Backs, 100PCS Lapel Pin Backs, Pin Safety Backs for Brooch Tie Hat Badge Insignia, Black

  • PIN RUBBER BACKS: pin backings made of PVC rubber, durable for long time use.
  • PIN SECURE BACKS: pin backs lock pins firmly and secure pins in place, no worry about losing your meaningful pins.
  • PIN BACKS SIZE: locking pin backs are 11mm in diameter and 7mm in height, great pin clutch backs replacement, compatible with pins 1-1.2mm in thickness, it cannot fasten if the pin is too slim.
  • WIDE APPLICATION: idea use as lapel pin backs, brooch pin backs, tie pin backs hat pin backs, fits on tie tacks, badge insignia, name tag, toy pins, citation bars, jewelries and other homemade craft pins.
  • PACKAGE INCLUDES: 100PCS black pin backs and 1-year warranty. If you have any questions, please do not hesitate to contact us.
Check Stock

Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)

  • Material: the small clutch is made of quality nickel plated brass.
  • Unnoticeable while lock pins firmly and keep them secure.
  • Metal material makes it anti-wear, sturdy.
  • Package contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage.
  • Quantity are enough for replacement to your torn or lost one.
  • Exquisite design:clutch pin backs are great match for most metal pin.
  • clutch provides good grip of pin to keep it stay in place.
  • With its firm and protective grip, rest assured that you will never lose another pin again.
  • Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off.
  • Simply push to secure onto pin post and pull the trigger while holding onto your pin to release.
  • These locking pin backs are a great alternative to rubber clutches.
  • Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins.
  • Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc..
Check Stock

100 Pcs Silver Safety Pins 1 Inch Pin Back Clasp Brooch Pins Backs with 3 Holes Safety Locking for Making Corsage, Name Tags, Badges, Citation Bars

  • Size —— The package including 100(±2%) pieces brooch clasps, each flat brooch pin sizes approximately 0.98 inches long..
  • Robust and secure — Bar pin brooch clasp is made of iron. Stainless steel plated, not easy to rust and damage.
  • and these are incredibly sturdy and secure..
  • Smooth to Fasten & Secure — These pin backs with locking function and have clasps that are reasonably easy to open and shut, securely fixed..
  • Easy to Attach — These brooch pins backs with 3 holes and are flat on the back.
  • Pin backs can be glued or directly onto any surface to DIY crafts..
  • Widely Used —These bar pins are excellent for making brooches or replacement to your torn or lost one.
  • And be applied to tie tacks, badge insignia, citation bars, name tag, etc..
Check Stock

2 Sets Women Beaded Lanyard with ID Holder Retractable Badge Reel Stainless Steel Chain Necklace with 2 Water Resistant Name Badge Holder Clip (Rose Gold)

  • Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
  • These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
  • Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
  • Package includes: 30pcs * brooch safety pin backs clasps..
Check Stock

Bar Pins Brooch Clasp Pin Backs Safety Pin 120 Pieces Silver for Name Tags, Badges (4 Sizes 20mm 25mm 32mm 38mm)

  • DIMENSIONS: Silver tone bar pin backs that come in 4 sizes: 0.75 Inch (20mm), 1 Inch (25mm), 1.25 Inch (32mm) and 1.5 Inch (38mm). Each set comes with 30 pieces of each size, for a total of 120 brooch clasps in a plastic box..
  • DURABLE: Made from iron metal with a strong nickel plating to ensure long lasting durability. Sturdy, secure and will not fall apart or rust easily..
  • EASY TO USE: Bar pins have flat backs with 2 or 3 holes so you can sew or glue them on. Safety pin backs have a clasp, which makes attaching and detaching a breeze..
  • MULTIPURPOSE: Great for jewelry making, DIY crafting, sewing or corsage making. Perfect replacements for lost or damaged brooch pins on name tags, insignia badges, citation bars and more!.
  • 100% SATISFACTION GUARANTEE - Purchase with confidence! We stand by our products and offer a 30 day money back guarantee, no questions asked!.
Check Stock

Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags Toy Ribbon Corsages Costume Jewelry Making Sewing Felt Fabric Baby Shower Wedding (Silver, 25MM)

  • Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
  • These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
  • Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
  • Package includes: 30pcs * brooch safety pin backs clasps..
Check Stock

Shapenty 30PCS Locking Pins Backs Safety Clasp Brooch Badge Bar Jewelry Pins for DIY Craft Name Tags Toy Ribbon Corsages Costume Jewelry Making Sewing Felt Fabric Baby Shower Wedding (Silver, 20MM)

  • Pin back with 2 holes, easy to open and close, You can stick decorative crafts with glue, or sew the hole directly. Easy to attach, good for attaching beads, dangles and various jewelry findings to create an unique and personalized ornaments. Not easy to drop and fall apart..
  • These safety pins clasps are great for making handmade jewelry pins, brooch pins, costume jewelry, name tag pins, flower pins, toy pins, bottlecap pins, diaper pins, corsages, ribbons, boutonnieres, hair clips, citation bars, unique and personalized ornaments, etc. Ideal for wedding ,baby shower, bridal shower, Christmas, etc..
  • Ideal for DIY craft project,  jewelry crafting, sewing fabric. Can be worn on  shirt, t-shirt, coats, sweaters, hats. or attach it to your backpack for personalized decoration..
  • Package includes: 30pcs * brooch safety pin backs clasps..
Check Stock