Top Clamp And Cut Edge Guide

Bora Jigsaw Guide For WTX or NGX Clamp Edge Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

  • Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.
  • Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.
  • Solid design - With two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
  • Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true.
  • An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

BORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check Stock

Bora NGX T-square Clamp Edge Accessory 544002

  • Squares your clamp edge to the material you are cutting.
  • Trapezoidal wedge system makes it easy to connect components.
  • Precision aluminum extrusion profile perfectly matches clamp edge fixed head.
  • Part of the NGX Clamp Edge System to cut and rip sheets and boards.
Check Stock

BORA 50 NGX Clamp Edge Extension Straight Cut Guide for Circular Saws | Add 50-Inches to Your NGX Clamp Edge 544060

  • Fits into NGX Clamp edge saw guide to increase length by 50 inches.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Adds 50-inches to your existing NGX clamp edge guide.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

BORA 100 WTX Clamp Edge and Saw Plate Set for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length | 545106K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge and Extension include ruled edge for easy measuring. Length-62.75 inch, Width-3 inch, Height-1.5 inch.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
Check Stock

BORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge includes ruled edge for easy measuring.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
  • Fits right- and left-handed circular saws.
Check Stock

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY 50 inch Extension 545060

  • COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
  • EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora....
  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length....
  • MAKE MEASURING EASY: A ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy.
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

30'' Aluminum Clamp and Cut Edge Guide Fixture Clamping Cutting Guide Bar Handle Lock

  • 30'' aluminum clamp and cutting edge guide.
  • Clamp across boards to provide a firm straight edge for accurate circular saw cuts.
  • 3 position cam lock action for strong hold.
Check Stock