Top Clamp Bolts

OSOBAK General Installation Accessory for Hard Tonneau Cover

  • *FITMENT: OSOBAK Series Hard Quad or Tri Fold Tonneau Cover.
  • *Inventory:2pcs*Knob,2pcs*Alu Block,4pcs* clamp handles with pins,4pcs*T bolts and plastic sliding,4pcs*handle lids,,1pcs*buckle mount,1pcs*buckles,1pcs*buckle holder,1bag* S/S M4 bolts,1Bag* R security Pin and manual.
  • *Usage:Easy Intallation,back up for the replacement.
  • *Notice:Pls contact with us before ordering, if you don't know about the accessory you need for the OSOBAK tonneau cover.
Check Stock

Goldfire Motorcycle Handlebar Risers, 8\ Straight Challenger Risers Fits for H-D 1” Handlebar (8\ Balck)

  • Engineered to increase the rigidity and stability of the handlebar..
  • 1" clamping area, works with any standard 1" handlebar..
  • Fits on all models with 3.5" center on center riser spacing (most H-Ds models) Base hole tapped for standard 1/2" * 13 mounting bolts (Bolts not included) (Standard Size)..
Check Stock

ChangTa GMX600NM Noryl Flange Valve Clamp Replacement for Hayward S144T Pro Series Pool Sand Filter

  • Sand Filter Flange Clamp : Fits Hayward pro series sand filter S144T and other sand filter valve clamp models .（Notice ：This clamp will NOT work on Bestways or Intex Filters.It only applies to Hayward.）.
  • Fits hayward variflo xl clamp : compatible with hayward Pro-Series Sand filtr the following models, S144T, S164T, S166T, S180T, S210T, S210S, S220T, S220T2, S230T, S244T, S244T2, S244S, S270T, S310T, and S360T for hayward Above Ground , In Ground Pools filter ..
  • Pro Series Sand Filter Parts : Our valve clips are made of heavy duty durable plastic material. Very solid construction. -Keep your sand filter in top condition by replacing worn valve clips! This simple valve clamp will save you expensive repairs..
  • Pool Sand Filter Replacement Kit : Include valve clamp,Nuts and Bolts.easy to connect and tighten .It is recommended that you first tighten by hand and then use a tool to tighten slightly to avoid damaging or cracking the valve seat.
  • Please note: For your correct use, please confirm the size before purchasing, please refer to Figure 4, it can fit 8 to 8.5 diameter sand filter, note that this part is not suitable for 12 inch sand pump..
Check Stock

Roadformer 5" Exhaust Clamp Narrow Band Stainless Steel (2 Pack)

  • This 5" exhaust clamp is made in Stainless Steel. Used to joint 5 inch OD pipe slip fit into ID pipe for connection. Two pieces included in a single pack.
  • Pre-attached hardware for fast, easy and accurate installation, Roadformer Clamp technology provides simple, effective way to maintain and repair your exhaust system.
  • Grade 10.9 bolts provided superior capability of clamping and sealing. This narrow band clamp does create over a ton of clamping force without crushing pipes, resulting in strong and serviceable joint. The working torque is in the range of 40-50 ft-lbs.
  • Our innovation Reaction Block Technology provides a full 360-degree equal distribution of stretching force, prohibiting pipe distortion, durable installation without damage to pipe ends.
  • Roadformer Clamps set industry standard in premium quality and affordable price. Roadformer private labeled products do means Quality, Trust and Responsibility.
Check Stock

Double Antenna Mast Clamp Heavy Duty Pole to Pole Mounting Kit V Jaw Block with U-Bolt Mounting Hardware for TV CB Ham Antenna Parasols Flags and Fishing Rods,3 Pack

  • 【Heavy Duty Pole to Pole Mounting Hardware】Double Mast Clamp is ideal for mounting a larger antenna to a mast,or mounting one pole to another..
  • 【Jaw blocks more stable】Antenna Pipe Clamp uses jaw blocks with U-bolts (2" in distance, 5.5" in length) to provide a firmer installation to....
  • 【Widely used】This Mast Mounting Clamp is designed to support most WiFi,PCS,Cellular,TV antennas and Ham,torches, flagpoles,umbrellas and other....
  • 【Durable material】Antenna Mast Clamp Kits is made from zine-plated steel with anti-rust coating finish,can be used for a long time..
  • 【Rich packaging】3 Set per package,including jaw block x 9,U bolt x3,nut x 6.Mast Mounting Clamp Kit are muti-purpose for mounting antennas and....
Check Stock

Muzata Glass Clamp Stainless Steel Square Polished for Panel Pool Deck Fence Balustrade Railing Post Garden Balcony with Expansion Bolt 1Pack GS10 SO4, GR1

  • High Quality- This square glass clamp is made of T304 stainless steel with integrated molding technology, high strength, durable, suitable for both outdoor and indoor applications..
  • Easy Installation- no holes required for glass panels, you can fix the glass firmly on the panel by rotating two screws included. Perfect for glass swimming pool, glass garden, balustrade, staircases on residential and commercial applications..
  • Adjustable- suitable frameless glass panels with a thickness of 8mm(5/16”), 10mm(3/8”), 12mm(1/2”), and 14mm(9/16”). All accessories are included to help you control the room of the clamp..
  • Stylish- the glass railing clamp is polished with a smooth surface for a modern and neat look. Fit horizontal and stair railing projects. Please search for Muzta GS10 SN4 to find square glass clamp with a satin finishing..
  • Package Included- a square glass clamp, 4 anchor bolts, a rubber gasket, and a foot cover are included..
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

OTC 4534 Multi Purpose Bearing and Pulley Puller Set

  • For a wide range of pulling jobs including: bearings.
  • alternator, generator, power steering, and crankshaft pulleys.
  • Drop-forged components can be used in a variety of combinations.
  • Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches.
  • Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts.
  • Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed.
Check Stock

Sresk Pullback Handlebar Risers with One Piece Top Clamp for H-D Handlebars with 1' Clamping Area (Black, 8')

  • Handlebar Risers with a One Piece Top Clamp with 4 mounting screws..
  • Will work on any Harley handlebar that is 1"' thick in the clamping area..
  • Engineered to increase the rigidity and stability of the handlebar..
  • 3 1/2” center to center at riser mounting holes. Base hole tapped for standard 1/2" * 13 mounting bolts (Bolts not included) (Standard Size)..
Check Stock

M.SJUMPPER ARCHERY Fletching Jig Adjustable Fletches Tool with Straight Clamp for DIY Arrows Shafts

  • Constructed of iron material, quality tested and ensured for maximum durability.
  • 1.20KG heavy and steady jig base, no need to intall others can be used directly in anywhere.
  • Easy to operate and quick set magnetic clamp, Fletch 3 vanes right-wing feathers or vanes at once.
  • Jig base height size for 5.40 inch (13 cm) and clamp equipped with scale for convenient use.
  • Available for different shafts material, fit for maximum OD 8.80mm archery shafts or bolts.
Check Stock

Ritchey 4-Axis Adjustable Bike Stem - 31.8mm, 90mm, Adjustable, Aluminum, for Mountain, Road, Cyclocross, Gravel, and Adventure Bikes

  • The Ritchey 4-Axis Adjustable stem features a 3D-net shaped forged shaft, interconnected with a precision broached clamp to create a strong, lightweight and secure stem.
  • Stem angle is adjustable +/- 55 degrees to obtain the optimal height and position.
  • Stainless steel bar and steerer clamp bolts provide exceptional durability.
  • Features Ritchey's BB Black finish for a sleek and modern look.
Check Stock

Ritchey 4-Axis Adjustable Bike Stem - 31.8mm, 120mm, Adjustable, Aluminum, for Mountain, Road, Cyclocross, Gravel, and Adventure Bikes

  • The Ritchey 4-Axis Adjustable stem features a 3D-net shaped forged shaft, interconnected with a precision broached clamp to create a strong, lightweight and secure stem.
  • Stem angle is adjustable +/- 55 degrees to obtain the optimal height and position.
  • Stainless steel bar and steerer clamp bolts provide exceptional durability.
  • Features Ritchey's BB Black finish for a sleek and modern look.
Check Stock