Top Clamp On Rod Holders For Boat

Perception Kayak Pescador Pilot Sit On Top for Fishing Moss Camo, 12'

  • Pedal-driven performance at an unbelievable price - Made in USA.
  • Lawn chair style mesh seat with 2-level seat adjustment and breathable mesh for ultimate all-day comfort and no pain.
  • Pilot drive pedal system can be fully recessed into hull for zero draft.
  • Leak-proof one-piece construction with built-in buoyancy for added safety.
  • Large front and rear open storage for cooler, tackle, and other gear.
  • Gear tracks, fish finder consoles & 4 Rod holders for anglers.
  • Integrated accessory rails on each gunwale for fish finders, Rod holders and other accessories.
  • Perfect for lakes and ponds, slow moving rivers and streams and calm coastal waters.
  • Boat length: 12’5” – width: 33-3/4”.
  • Boat weight: 85 lbs. – Max capacity 475 lbs.
Check Stock

Ducurt Horizontal Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for Garage & Boat 6-Rod Storage Racks -1 Pair

  • Horizontal 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5 inch wide, it can hold up to 6 fishing rods. The diameter of the EVA foam is about 0.4 inch, it can fit most of rod sizes, especially ideal for fresh water rods and ice fishing poles..
  • Space Saver: You can easily screw the fishing rod racks to your wall, ceiling, garage or your boat for space saving. Works good for you to keep your fishing rods off the floor and well organized..
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders come with 4 quality screws for installation. Just drill one hole in the wall, then level the fishing pole rack in place and screw into the hole and put on the rod racks. The steps will take you about 10 minutes, convenient for both kids and adults..
  • Protective and Secure: Equipped with soft EVA foam assorted in the fishing pole holders, helps protect your valued fishing rods from scratching and keep them from falling down. The foam is elastic, more convenient for you to put on and take down your fishing poles..
  • Two Types Available: There are horizontal fishing rod holder an....
Check Stock

Stroller Cup Holder, MOMSIV 2 in 1 Universal Bike Cup Holder Rack Bottle Holder for Pushchair Stroller Bike Wheelchair Walker and More

  • ...and mobile phone at the same time. The large phone holder can fit most phones, compatible with iPhone 8/11/12/X, Samsung 6/A51/Galaxy s9+ and all mobile phones under 6.0 inches. Make it convenient to see the new messages and incoming calls in the first time..
  • Wide Applicability: MOMSIV stroller cup holder with phone holders features strong compatibility, which is suitable for most baby strollers, pushchairs, walkers, wheelchairs, bicycles, scooters, boat handlebars, shopping carts, treadmills, etc. Just clip on a round or flat rod and keep your beverages stable. It meets all your needs and makes travel easy..
  • Silicone Pad to Support: MOMSIV bike cup holder liner has flexible TPR silicone pads, which help you secure your cups, bottles in place to prevent them from moving and spilling. It measures 3.94" in diameter and its open sides allowing it to fit different sizes and shapes of cups and bottles, like coffee mugs, baby bottles, sippy cups, mini cups with handles, glass bottles, etc..
  • Lock with Rubber Clamp: The clamp of the bicycle cup holder is designed with a rubber pad in liner, it can help you to lock the bottle rack onto the rod without movement and fit most different sizes of rods, which diameter is 1.4 - 4.5 cm/0.55 - 1.77in. Also, it can rotate....
Check Stock

Marinebaby 5 Rod Holders Angle Adjustable Rod Holders Fishing Console Boat T Top Rod Holder Rocket Launcher Adjustable Fishing Rod Holder for Rails 1' to 1-1/4'

  • The clamp size is 2 inch, we supply 2 rubber inserts for 1" to 1-1/4" inch size tubing..
  • Adjustable Fishing Rod Holder for Rails 1" to 1-1/4".
  • The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert)..
  • ou will have a place for you fishing rods in a safe place off your floor.
Check Stock

Pelican Sport - PEDAL BOAT MONACO DLX ANGLER - Adjustable 5 Seat Pedal Boat with Canopy, Green/White

  • Durable: Our patented RAM-X material is known for its high-impact resistance and will make your pedal boat last through time..
  • Comfortable: Navigate in comfort with the MONACO DLX ANGLER's molded seats and adjustable backrests..
  • High Capacity: This pedal boat can seat up to 5 individuals with a total maximum weight capacity of 695 lb..
  • Storage: This fishing pedal boat includes four drink holders and a built-in cooler/storage compartment equipped with solid covers to ensure you have enough room to bring food, beverages and essential gear on your adventure. This boat also includes a foldable canopy to keep you protected on sunny days..
  • Fishing Features: Anglers will enjoy the addition of two flush mount rod holders..
Check Stock

LabZhang 5 Pack Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle for Rods up to 18mm in Dia

  • Stand Clamp Holder Boss Head made of aluminium alloy,with a screw for attaching a clamp onto the stand’s rod.
  • Package of 5 pcs adjustable boss head clamp holders with Aluminium Alloy Body Right Angle Clips.
  • Bosshead Clamp Holder used for holding a clamp in medical labs and research institutes,also suitable for home use..
  • Large, easy-to-rotate knobs help provide extra leverage to easy and accurate adjustment..
  • Adjustable boss head clamp holders.made of high-quality Aluminum Alloy body with plastic knobs, ensuring it durable and sturdy constructed..
Check Stock

Ducurt Horizontal Fishing Rod Rack Holders Wall-mounted Fish Pole Holder for Garage & Boat 6-Rod Storage Racks -1 Pair Rod Holder Rod Holder

  • Horizontal 6-rod Racks: The fishing rod holders is 13.6 inch long and 2.5 inch wide, it can hold up to 6 fishing rods. The diameter of the EVA foam is about 0.4 inch, it can fit most of rod sizes, especially ideal for fresh water rods and ice fishing poles..
  • Space Saver: You can easily screw the fishing rod racks to your wall, ceiling, garage or your boat for space saving. Works good for you to keep your fishing rods off the floor and well organized..
  • Wall Mounted Fishing Rod Rack: Each pair fishing pole holders come with 4 quality screws for installation. Just drill one hole in the wall, then level the fishing pole rack in place and screw into the hole and put on the rod racks. The steps will take you about 10 minutes, convenient for both kids and adults..
  • Protective and Secure: Equipped with soft EVA foam assorted in the fishing pole holders, helps protect your valued fishing rods from scratching and keep them from falling down. The foam is elastic, more convenient for you to put on and take down your fishing poles..
  • Two Types Available: There are horizontal fishing rod holder an....
Check Stock

Pelican - Bass Raider 10E Angler Fishing Boat - 10.2 ft

  • Durable: Our patented RAM-X material is known for its high-impact resistance and will make your fishing boat last through time..
  • Comfortable: Navigate in comfort with two folding seats that can slide along the tracks so you can adjust your position on the boat. This comfortable seat also swivels 360 degrees so you can face any direction while you're fishing or reaching for equipment. Additional features include multiple storage compartments, drink holders and two vertical rod holders for your convenience..
  • Pre-Wired: The BASS RAIDER 10E fishing boat is pre-wired to easily connect an electric motor and/or a sonar with a 12 V electrical outlet..
  • High Capacity: This fishing boat holds a maximum weight capacity of 600 lb, ensuring plenty of room to bring someone along on your fishing trip and space for all your gear..
  • Safe: This boat is designed to provide excellent stability and balance when you're casting lines and reeling in fish. Our unique manufacturing process allows us to include additional flotation inside the hull of all of our fishing boats in order to meet or surpass ABYC standards..
  • Easy Transportation: Equipped with four robust carrying handles, it provides a good grip so that two people can easily transport this fishing boat..
Check Stock

Clark Fork River Montana Dry Creek to St. Regis: June

  • ...table: Navigate in comfort with two folding seats that can slide along the tracks so you can adjust your position on the boat. This comfortable seat also swivels 360 degrees so you can face any direction while you're fishing or reaching for equipment. Additional features include multiple storage compartments, drink holders and two vertical rod holders for your convenience..
  • Pre-Wired: The BASS RAIDER 10E fishing boat is pre-wired to easily connect an electric motor and/or a sonar with a 12 V electrical outlet..
  • High Capacity: This fishing boat holds a maximum weight capacity of 600 lb, ensuring plenty of room to bring someone along on your fishing trip and space for all your gear..
  • Safe: This boat is designed to provide excellent stability and balance when you're casting lines and reeling in fish. Our unique manufacturing process allows us to include additional flotation inside the hull of all of our fishing boats in order to meet or surpass ABYC standards..
Check Stock

NTYGAE Boat Fender Clips Adjustable Stainless Steel Bumpers Hangers Pontoon Boat Bumpers Square Rail Clips for Docking 2 Pack

  • 【Material】The pontoon fender clips are made of high-strength stainless steel, which can bear a weight of more than 35kg. The square rail clip uses....
  • 【Upgrade Hanger】The boat fender holders are suitable for 1/4 to 3/8 inch fender line, can clamp 1-1.37 inch square rail, is the best pontoon boat....
  • 【New Design】Designed by the United States, the height of the pontoon can be adjusted at will without causing the fender line to fall off, which is....
  • 【EASY TO USE】The boat fender holders are sliding adjustable in size and can be mounted on square rails with seats without worrying about being....
Check Stock

KEMIMOTO Boat Cup Holder Boat Storage Organizer Marine Seat Organizer for Fishing Boat Boat Seat Storage Caddy Fits 1.5 -2 Round Rod

  • Convenience: kemimoto boat cup holder provides a convenient place to keep beverages on the water. You don't have to worry about holding your drink or placing it where it might spill..
  • Efficiency: These boat caddy organizers help you stay organized and efficient while fishing. By providing designated places for items such as bait, hooks, and lures, you can quickly and easily find what you need without wasting time searching through cluttered tackle boxes..
  • Fits: This boat organizer custom clamp is specifically for 1.5"-2" round rod..
  • Durability: This boat seat tool holder is durable and can withstand exposure to the elements, such as water, sun, and dirt..
  • Package Include & Why Choose Us: The package includes 1 boat seat cup holder, 1 wrench, 1 connecting rod, 2* M6 screws, and a gasket. At kemimoto, we fully stand behind our boat seat tool holder. If you don't 100% love our boat cabin storage holder, please don't hesitate to contact us, and we will provide you with the best solution in time..
Check Stock

perception Pescador Pilot 12 | Sit on Top Fishing Kayak with Pedal Drive | Adjustable Lawn Chair Seat and Tackle Storage Areas | 12' | Sonic Camo

  • Pedal-driven performance at an unbelievable price - Made in USA.
  • Lawn chair style mesh seat with 2-level seat adjustment and breathable mesh for ultimate all-day comfort and no pain.
  • Pilot drive pedal system can be fully recessed into hull for zero draft.
  • Leak-proof one-piece construction with built-in buoyancy for added safety.
  • Large front and rear open storage for cooler, tackle, and other gear.
  • Gear tracks, fish finder consoles & 4 Rod holders for anglers.
  • Integrated accessory rails on each gunwale for fish finders, Rod holders and other accessories.
  • Perfect for lakes and ponds, slow moving rivers and streams and calm coastal waters.
  • Boat length: 12’5” – width: 33. 75”.
  • Boat weight: 85 lbs. – Max capacity 475 lbs..
Check Stock