Top Clamped Butterfly Valve

HIYITKS Air Chuck with Clip Adapter, Brass Locking Tire Inflator Nozzle Adapter Connect, No Leakage 250 PSI Tire Chucks for Vehicle Inflator Compressor Pump ConnectTool

  • ️[ No Leakage & High Efficiency ]: Just press down locking clip on tire inflator, push or twist HIYITKS tire air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator chuck gives you a great seal on the tire valve, it is great Air tire inflator nozzle Hose Adapter accessory..
  • [ Premium HIYITKS Tire Air Chuck With Clip Adapter ]: Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • [ Universal Fitment ]: 8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, Inflator Air nozzle fit for a host of vehicle tire inflator tire pump adapter , like bike, motorcycle, truck,car tire fill etc..
  • ️[ Precise Design ]: It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
  • ️[ Easy To Operate ]: Plugs open flow HIYITKS air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
Check Stock

LotFancy 2 Pack 14” x 2.125/2.40 Bike Inner Tubes, Schrader Valve (32mm), 14 Inch Bike Tube for Kids Bike, Plus 2 Nylon Plastic Tire Levers

  • 【Package Include】2Pcs 14” x 2.125/2.40 Bike Tubes, 2 Pcs Tire Levers.
  • 【Size】This 14” bike inner tube fits 14-inch wheel, tire width between 2.125 to 2.40. (Please kindly confirm that your bike tire is 14inch before you buy).
  • 【High Quality】 Our bike inner tubes are made of high quality butyl rubber material. Better air tightness, heat resistance, and durable. Suitable for most of bicycles wheels.
  • 【NOTE】Make sure inner tube match with the size of tire.
  • Inflate a little air before installment, to avoid crack or damage during installment.
  • Install the valve correctly, which must be 90° with steel, and the nut must be well locked.
  • After installment, please check the tube is at the right position between steel and tire, make sure the tubes are not clamped by them.
  • Then inflate the air according to pressure standard of tire.
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 2Pack

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 1Pc

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover ( 4' Tube OD )

  • Tube OD: 4 Inch, Ferrule Size: 102MM, Fits 4 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover (1.5\ Tube OD)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

Butterfly Valve Wafer PN16, Body/disc - cast Iron, seat - EPDM (250°F / 120°C) with Electric Actuator 110V ON/Off (6\ (DN150))

  • Wide Use: It’s a Motorized Butterfly Valve. Suitable for food, pharmaceutical, beverage, cosmetics and chemical industry..
  • Material: High quality 304 Stainless Steel material, strong sealing. Strong acid resistance, not easy to corrosion. Long service life.
Check Stock

275 330 Gallon IBC Tote Adapter,IBC Tote Brass Valve with 5/8' Outlet,2' Coarse Thread

  • The valve is used for plastic container outlet control to prevent liquid from splashing around..
  • It has the advantages of acid resistance, alkali resistance, corrosion resistance, high mechanical strength..
  • Inner diameter input end diameter: 75mm,Operating temperature -20 degrees centigrade ~ 70 degrees centigrade..
  • The butterfly valve introduces foreign technology, is made of high-density polyethylene and other engineering plastics,and is assembled, with novel structure and beautiful appearance..
  • Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
Check Stock

FOMTOR Bike Stem Riser MTB Handlebar Risers Fork Stem Extender for 1-1/8 28.6mm Fork Mountain Bike Road Bike MTB BMX 115mm

  • Function：Can be used to convert a diameter of 7/8'' (22 mm) to 1'' (25 mm)..
  • Compatible：Suitable for handlebars with a diameter of 22 mm..
  • Material：Made of aluminum alloy, it is corrosion-resistant, rust-proof and has a long service life..
  • Easy to Use：It helps you to quickly install the narrower rod to the wider rod..
  • Installation：Just need to put a gasket on each side of the area to be clamped on the handlebar, insert it into the valve stem, and then tighten it....
Check Stock

(2-Packs) Male Hose Bibb 3/4″ MIP × 3/4″ MHT with 1/4-Turn Water Hose Shut Off Valve, Hreaded Garden Hose Outlet ideal for gardens, patios, boiler drain

  • 【Package】Pack of 2 pcs of 3/4″ MIP Inlet × 3/4″ MHT Outlet Garden Bibb Stop Valve.
  • 【Construction】Brass Construction for Stronger structure and Anti-corrosion，Butterfly Style T-Handle for Easy Shutoff..
  • 【Easy to Install】 Irrigation garden hose valve allows for easy installation, and is usable for both residential and commercial applications..
  • 【Easy to Use】The outside faucet bibb adopts 1/4-turn valve for quick switch-on/off..
  • 【Versatile】The exterior water spigot is used as a direct water faucet, or as a hose connector for external water service for garden or carwash..
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock