Top Clamping Operations

Bessey GTR16B6 All Steel Table Clamp with 6 5/16 Capacity x 2 5/16 Throat Depth & 400 lb Clamping Force, Red/Silver

  • Secure items to MDF tables with a matrix of holes.
  • Compatible with saw guides by Festool, Protool, Metabo, Makita & DeWalt.
  • ACME threaded spindle for quick, smooth clamping operations.
Check Stock

DE-STA-CO 812-U Pneumatic Hold-Down Clamp with U-Bar, 150 lb Hold Capacity

  • Low-profile, compact clamp fits in tight workspaces.
  • Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • Holding capacity is 150 lb. and maximum clamp bar opening is 99 degrees.
  • Port size is M5, operating temperature is -10 degrees F to 165 degrees F, and maximum inlet pressure is 53 psi.
Check Stock

DE-STA-CO 810-U Pneumatic Hold-Down Clamp with U-Bar, 600 lb Hold Capacity

  • Built-in air flow control provides smoother operation during repetitive clamping operations compared to manual clamps.
  • U-shaped hold-down bar for larger clearance angle when used with a holding screw (not included).
  • Magnetic ring piston accommodates round or T-slot sensors.
  • Holding capacity is 600 lb. and maximum clamp bar opening is 99 degrees.
  • Port size is 1/8" NPT, operating temperature is -14 degrees F to +195 degrees F, and maximum inlet pressure is 51 psi.
Check Stock

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

  • Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
  • Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
  • Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
  • Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.
Check Stock

HFS (R) Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14\ - Tool Stand

  • [MATERIAL]: The strut is made of aluminum and the base is cold drawn steel..
  • [SIZE]: Total Height: Approx. 360mm / 14.1 inch.
  • Base Size(L x W x H): Approx.62 x 60 x 50mm(2.44 x 2.36 x 1.97").
  • [MAGNETIC STAND]: The magnetic bracket adopts switchable permanent magnet, which is easy to install on the metal surface..
  • [UNIVERSAL KNOB]: Flexible, strong and precise rotary joint can adjust the support rod to any direction and fix it firmly..
  • [APPLICATION]: Used to maintain the position of a dial indicator or test indicator etc. during measurement operations..
Check Stock

Cylinder Pneumatic Clamp Air Clamp Hold Down Clamp with U-Bar, GH-12130 Air Toggle Clamp

  • METAL MATERIAL: This pneumatic clamp is made of high-strength metal material, which is anti-oxidation, wear-resistant, strong and reliable.
  • STABLE OPERATION: Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • HIGH EFFICIENCY: The pneumatic clamp can shorten test time,and improve production efficiency which reduce labor intensity of workers.
  • WITH U-BAR: Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • WIDELY APPLICATION: The pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock

Pyle String Peg Winder Electric Guitar Drill with Built-in Powered Rechargeable Battery PCBLWN41

  • UNIVERSAL INSTRUMENT STRING WINDER: This tool is useful to any instrument string winding or tightening. Works with guitar, banjo, violin, bass, and....
  • COMPATIBILITY MODE: A guitar string winder is such a time saver, especially for the repairman. PCBLWN41 is compatible with virtually all brand makes....
  • BUILT-IN POWERED RECHARGEABLE BATTERY: This advanced string winder is easier and more efficient to work with your lovely guitar. It comes with a....
  • VERY EASY TO USE: The hassle-free trigger-activated operations, detachable know clamping system for easy use. Selectable direction for tightening and....
  • COMPACT AND RELIABLE: Compact and portable anywhere you need complete string changes. The PCBLWN41 String Peg Winder answers the demand for....
Check Stock

Gator ETX Soft Tri-Fold Truck Bed Tonneau Cover | 59405 | Fits 2005 - 2015 Toyota Tacoma 6 2 Bed 73.7

  • Fits 2005 - 2015 Toyota Tacoma 6' 2" Bed (73.7").
  • FAST & EASY NO-TOOL INSTALL | The Gator ETX Tri-Fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill,....
  • ELIMINATE THE ELEMENTS | This cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust....
  • SIMPLE OPERATIONS | To open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Drive with....
  • SLEEK & DURABLE DESIGN | The Gator ETX mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of....
Check Stock

Gator ETX Soft Tri-Fold Truck Bed Tonneau Cover | 59313 | Fits 2015 - 2020 Ford F-150 6 7 Bed 78.9

  • Fits 2015 - 2020 Ford F-150 6' 7" Bed (78.9").
  • FAST & EASY NO-TOOL INSTALL | The Gator ETX Tri-Fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill,....
  • ELIMINATE THE ELEMENTS | This cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust....
  • SIMPLE OPERATIONS | To open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Drive with....
  • SLEEK & DURABLE DESIGN | The Gator ETX mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of....
Check Stock

Walter Surface Technologies 15D044 Backing Pad Assembly - 4 ½ in. Sanding Disc Pad. Abrasive Wheel Pads

  • Components: the set includes a plastic back pad and a 5/8 in.-11 clamping nut. The nut ensures secure mounting of the pad on sanding disc for uninterrupted sanding operations.
  • Sander Backer Pad: the disc pad is specially manufactured for dissipating heat, maximizing the durability of resin fiber sanding discs.
  • Efficiency: back pad works suitably well with 4 ½ in. Coolcut (aluminum oxide) and Topcut (zirconia alumnia) sanding discs from Walter Surface Technologies. This pad is rated for maximum rotational speed of 13300 RPM.
  • Multipurpose: being flexible, the pad can be employed during blending or removal of welds and finishing of erratic or curved surfaces. The backing pad is made from industrial-grade plastic with impact resistance.
  • Specifications: this orange-colored pad measures 4 ½ in. in diameter and weighs 2.82 oz..
Check Stock

Mini Magnetic Base Indicator Holder, Dial Indicator Holder Mini Universal Adjustable 50KG Strong Magnetic Lever Stand Base

  • Strong suction: the direction of the dial indicator bracket is easy to adjust, the universal arm can be fixed at any angle, it is convenient and quick to use, strong suction, and can suck the steel surface..
  • Adjustable direction: There is a fine adjustment device at the dial indicator holder, which can be adjusted in any direction..
  • Function: In addition to clamping ordinary dial indicators and lever indicators, the mini magnetic base indicator bracket can also clamp lever dial indicators with dovetail grooves..
  • Rugged and durable: The magnet of the magnetic indicator base is permanent, and the bracket is made of metal, which is flexible and has a long service life..
  • Wide range of applications: Magnetic bases are widely used in metal processing, machine measurement, calibration operations, precise workpiece fields, and machine manufacturing inspection tools..
Check Stock

Gator ETX Soft Tri-Fold Truck Bed Tonneau Cover | 59118 | Fits 2020 - 2022 Chevy/GMC Silverado/Sierra 2500/3500HD 6 10 Bed 81.9

  • Fits 2020 - 2022 Chevy/GMC Silverado/Sierra 2500/3500HD 6' 10" Bed (81.9").
  • FAST & EASY NO-TOOL INSTALL | The Gator ETX Tri-Fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill,....
  • ELIMINATE THE ELEMENTS | This cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust....
  • SIMPLE OPERATIONS | To open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Drive with....
  • SLEEK & DURABLE DESIGN | The Gator ETX mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of....
Check Stock