Top Clevis End Gas Strut

Apexstone 160N/36lb 10 inch Gas Struts, Gas Shocks, Gas Springs, Gas Strut Lift Support 160N Hinge, Lid Stay, Set of 4

  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.NOT SOFT CLOSE GAS STRUT!!!.
  • 36 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projects.WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉.
  • Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 36 and 72 lb.
  • INSTRUCTIONS&SCREWS INCLUDED In the package,While you can feel free to Click “Ask Seller” Besides Your Order for In-time Assistance.
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our 35 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.
Check Stock

Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width 600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door..
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc..
  • ★ Pressure:150N / 33lb / 15KG (Per Strut).
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″. Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet d....
Check Stock

Apexstone 100N/22lb Gas Struts 10 Inch Gas Struts Lift Supports Gas Spring Lid Support Gas Props/Shocks, Set of 4

  • Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!.
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.
  • Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉.
  • Instructions Included, Screws Included.This gas strut is okay for rv cabinet door, tool box, can ,etc..
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.
Check Stock

Apexstone 45N/10lb 10 inch Gas Struts, Gas Springs, Gas Strut, Lift Support, Gas Shocks, Lid Stay, Lid Support, Set of 4

  • Lids soft open gently,Ideal for supporting the lid to keep it open.
  • Length ( hole center to hole center) :9-11/16”.
  • Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″.
  • Support opens lids to a maximum angle of 100 degrees. WORKING TEMPERATURE: -10 ℃ – 40 ℃/14℉-104℉mm)..
  • Instructions Included, Screws Included. This gas strut is okay for rv cabinet door ,can ,toolbox etc..
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return.
Check Stock

12 Inch 135lb/600N Adjustable Heavy-Duty Gas Shock Strut Spring for Tool Box RV Bed Cabinet Boat Cover Door Lid and Custom Projects Without Mount Bracket.

  • 【PRODUCT FEATURE】The 12in gas spring is PRESSURE-ADJUSTABLE. You can use the wrench included with the package to release the gas inside the gas....
  • 【PLACEMENT】Most used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper....
  • 【PARAMETER】Extended Length: 12IN(300mm).Maximum Pressure: 600 N/135Lbs Per Strut.Super Strong and stiff, you couldn't compress them by your hand!!....
  • 【ADJUSTMENT TIPS】 Only release the gas in one-second bursts to avoid releasing too much gas. Repeat the process until the gas strut is behaving as....
  • 【12+1 MONTH REPLACEMENT】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs..
Check Stock

FASONLA GAS STRUTS, 300N/67LB FORCE EACH GAS STRUT LIFT SUPPORT, 15

  • POWERFUL STRUT: Your Gas Springs are powerful, prop open any medium to heavy object such as a car lid or barrier for hands free convenience, with easy fittings to any surface just attach, lift and your gas spring lifts and holds open any medium to heavy object. CAUTION anything under 65lb of weight should not be fitted with your gas springs, these powerful springs is difficult to be compressed by hand.Not Suitable for toy-chest or Windows..
  • SET OF 2 - 65 to 120 LBs TOTAL WEIGHT: Your gas springs come in a set of 2, able to hold open 65lb of weight each use individually on medium weighted objects or together for a combined hold strength of 120lb or more..
  • 15 TOTAL LENGTH: Each of your gas springs when fully extended is 15 in length and when fully compressed is 9 in length giving you the option to have 90-130 degrees of opening depending on the position of your gas springs..
  • EASY FIT & REMOVAL: Your gas springs come with 2 L-plates each at top and bottom with 4 screw holes and screws included, simply screw into any soft surface or pre drill a guide hole in any tough surfaces like wood, metals. The High quality materials included mean your screws can easily be fit and removed for any adjustments..
  • BRAND GUARANTEE: If you are looking for top quality Gas ....
Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
  • Length ( hole center to hole center) :9-11/16''.
  • Travel:3-14/25'' ,Distance between ball mounts compressed:....
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....
Check Stock

Marilyn Hotchkiss' Ballroom Dancing & Charm School

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
Check Stock

C16-20651 18.7 Inch 40lb/178N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Parts, Set of 2 by HUOPO

  • 【Truck Camper Shell Replacement Part】 Gas shock spring strut for leer camper shell topper rear windows door truck cap toolbox canopy cover. Please compare the interchange number and dimensions with the OEM gas spring before purchasing..
  • 【C16-20651 Gas Struts Specifications】 18.7 inch 40lb/178N Gas Struts Shocks Spring Lift Support. Extended Length 18.70 inch. Compressed Length 10.82 inch. The 18.7 inch gas struts connector is 10mm Nylon Socket type. End fitting 10mm ball stud. WARM TIPS: The 40lb gas struts is so strong that you can't compress it by hand..
  • 【18.7 Inch Shock Interchange Number】 Find the below Interchange number on your OEM gas shock cylinders for a exact match: C16-20651 SE187P40 SE187P40S10, These camper shell shocks are compatible with many truck canopy types, LEER truck cap parts, ARE truck topper parts, Snugtop replacement parts, These are the perfect OEM replacement parts..
  • 【C16-20651 Struts Package Content】Package contains 18.7 inch gas struts*2. Installation with a flat screwdriver, no special tools required..
  • 【13 Months Replacement Warranty】 HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and wi....
Check Stock

2 Truck Upfitters 26.5" Gas Props for Snuglid SL & F2 Pickup Truck Shortbed Tonneau Covers (26.5" extended, 15.4" compressed, 80 lbs of pressure ea) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!

  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!.
  • Truck Upfitters Pair (2 total) of 80 pound (each) gas struts. 26.5″ extended length and 15.4″ compressed length. Most commonly used for Snuglid/Snugtop brand (SL & F2 models) and Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit..
  • These do not fit all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N – 356N Newtons of pressure.
  • Comes with four threaded 13mm ball mounts and nuts for alternate ‘other than tonneau cover’ applications. Equivalent to Stabilus 202677 or Snuglid # 713119. Prime! Free Shipping! In Stock!.
  • Fits many (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5′) Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers:....
Check Stock

Bilstein B4 Front Struts & Rear Shock Absorbers Kit For BMW E90 E91 E92 3.0L L6

  • This package contains 2 front driver and passenger side complete struts. Each complete strut comes pre-assembled with a strut, coil spring, strut mount, boot, bumper kit, spring seat and isolator. A spring compressor is not required for installation.
  • OE / Interchange: 172901, 182901, 172902, 182902. Each strut is nitrogen gas charged.
  • ISO / IATF 16949 Certified, direct fit and made from high quality materials to meet OEM specifications. Backed by a 6-month warranty.
  • Replacement for 2013 2014 2015 2016 2017 Nissan Altima 2.5L 3.
  • Please use Amazon's vehicle fitment tool (located at the top of the listing on desktop, below the images on mobile) to confirm that the part is correct for your vehicle application. Purchased bundles may only be returned as a complete bundle. Partial returns of bundles are not permitted.
Check Stock

suiwotin 2PCS M5 Turnbuckle Stainless Steel Jaw and Jaw Turnbuckle Rigging Screw, Closed Body Turnbuckle Jaw for Marine Grade

  • 【Package Includes】 -- 2PCS x M5 Jaw and Jaw Turnbuckle. Total Length: 137mm/5.4". Breaking Load: 1100lbs..
  • 【Premium Material】-- Jaw turnbuckle is made of premium stainless steel, highly resistant to oxidation, rust free and wear resistant..
  • 【Function】 -- Each end has open jaw with pin and safety wire for easy,secure connections. For fastening and binding rope. Simply take out the clevis pin from the rigging screw fork by removing the split ring..
  • 【Application】 -- Jaws on each end allow easy connection to eyes with a clevis pin and cotter pin. Ideal for marine and industrial use, can also be used for recreational activities like zip lining.
  • 【100% SATISFACTION GUARANTEED】-- If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products..
Check Stock