Top Clip Connectors
Lisle 13120 Electrical Connector Separator
- Quickly Disconnects Electrical Connectors Without Damage.
- Engage the tool tip behind the connector clip.
- The tool is double-ended to fit different access angles.
- Works on Weather Pack and other automotive electrical connectors.
Check StockVRGE- USB Battery Power Bank Organizer Kit for Oculus Quest
- Organizes external usb battery packs for Oculus Quest.
- Universal clip attaches with VHB tape to any usb power bank with a flat surface, allowing power bank to store on pants hip or pocket..
- Side clip for keeping usb cable clear of users hands and routed to the power bank while in use..
- 5ft USB-C cable with heavy duty braided cord, velcro organizer and right angle connectors for clean cable routing..
- Clip fits to back of Quest strap for organized storage with headset. Can also be attached back strap as a counterweight to reduce front face pressure....
Check Stock50pcs Compact Wire Conductor Connector,one-to-one Quick Terminal Block Splicing Connectors,Assortment Conductor Can Splicing into 2/3/4/6 Way Butt Terminal Connectors
- 【Package includes】Total 50PCS butt connectors (BL-SPL-1), SPL-1 Butt Terminal Wire Connectors that can be flexibly assembled into 2/3/4/6 bit....
- 【Higher security】 This wire connectors are universal for both hard and soft wires. You can use them to control multi lights by one switch.....
- 【Easy to operate】:First remove the wire jacket (9~10mm), just push the orange clip slightly to the top 90°, insert the cable and switch off the....
- 【Widely Application】Universal connectors are suitable for solid wire with 0.08 to 4 mm²/ 28-12AWG and for flexible wire with 0.08 to 2.5 mm² /....
- 【Can be reused】Each connection terminal has a detection connection and can be recycled as well. Every junction independent shrapnel, different....
Check StockCable Matters 100-Pack CAT6 RJ45 Modular Plugs (RJ45 Connectors / Cat6 Connector / Cat6 RJ45 Ends / RJ45 Plugs) for Solid or Stranded UTP Cable
- DIY network patch cable RJ45 connectors terminate unShielded twisted pair stranded or solid cable for making a custom-length Cat 6 Ethernet cable.
- Supports 23 to 28 AWG round or flat stranded wire with an outside diameter up to 6.3mm.
- Category 6 performance rated for a Gigabit Ethernet channel compliant network.
- Backwards compatible with Cat 5e stranded or solid cable.
- Gold-plated contacts on 8P8C network connectors provide superior transmission and resist corrosion for a Cat6 cable.
- Cost effective 100-pack of Cat6 connectors provides enough connectors for a large project or multiple small jobs.
- Construct multiple patch cables in the perfect length for router, patch panel, or workstation applications with this crimp connector.
- Convenient jar storage container protects and stores the RJ45 modular connectors until your next project.
- Screw-on lid with an integrated handle makes it easy to carry the RJ45 ends along to the job site.
- Crimp style plugs terminate solid or stranded cable with a three point staggered contact to provide a secure connection.
- Cat 6 crimp connectors are compatible with Cable Matters RJ45 Strain Relief Boots to protect the clip from accidental damage and bolster the integrity of the cable.
Check StockESEOE Pants Hangers, Space Saving Skirt Hangers with Adjustable Clips & Multi Clothes Hanger Connector Hooks, 20pack Heavy Duty Ultra Thin Hangers for Adult Kids
- Upgraded pants hangers: After rounds of optimization, our pant hangers can slide along the clothes rail, and under the double protection of the dipping sleeve and coating, it will no longer rust, the hook has become easy to open.
- Stackable Skirt Hangers: Our skirt racks are equipped with free hanger connectors, you can stack them at will, saving 75% of the space in your wardrobe. Space-saving hangers make your wardrobe no longer a mess.
- Clip Hanger Have a Gripping Force Strong: The clip hangers for pant have the grip of the hanger clip is powerful, you can easily clamp your clothes. The rubber coat of the clips is designed to increase friction and prevent leaving a scar on clothes.
- Suitable for All Sizes of Clothes: Skirt hangers with 2 adjustable clips that can rotate 360 Degree, The width of the clips can be adjusted along the length of the hanger so that it becomes useful for clothes of adults as well as children.
- You Will Get: Made of high-quality stainless steel material 20 X pant hangers and 10 X plastic hanger connectors, This set is a superb value, not only do you get a lot they are made really well, durable, and can hold Heavyweight.
Check StockD-Line 157in Cord Cover Kit, Self-Adhesive Wire Hiders, Half Round Cable Raceway to Hide Wires on Wall, Electrical Cable Management - 10x 15.7 Lengths & 19 Accessories - 1.18\ (W) x 0.59\ (H) - White
- D-Line cord cover is supplied with an effective self adhesive backing for easy peel & stick installation. A range of most popular D-Line raceway accessories supplied per pack. Clip-Over Bends & Tees simply snap fit over cord hider channels, forgiving any imprecise cuts or measurements. While Smooth-Fit Connectors internal shoulders fit inside raceway lengths ensuring a neat appearance can be maintained!.
- D-Line's paintable on wall cord covers are popular to.
- conceal cables above baseboards - with the half round profile appearing as the natural top section, to hide cables coming from wall mounted TVs, keeping cables on the surface makes it easier to add or remove cables at a later date..
- D-Line's on wall cable management solutions are supplied with applied adhesive backing, with one-piece hinged design for easy installation. No prior electrical or DIY know-how is required to install D-Line Raceway..
- D-Line Cable Raceway Kit contains: 10 x 1.18" (W) x 0.59" (H) x 15.7in Lengths (13.12ft total wire cover coverage), 4x Clip-Over Flat Bends, 2x Clip-Over External Bends, 2x Clip-Over Internal Bends, 2x Clip-Over Equal Tee, 9x Smooth-Fit Connectors.
Check Stock3528 2-pin 8mm LED Connector kit led Strip Connector L-Shaped Connector 2-pin Right-Angle Connector T-Shaped Connector Solderless Seamless Connector Jumper Connector (8mm)
- The LED connector kit is suitable for 2835 3528 2-pin 8mm LED light strips. It is easy to install. Connect the positive and negative poles of the connector. Just insert the light strip into the connector and clamp the cover. No need for welding and other processes.
- Strip connectors include: 8 XL connectors, 2 XT connectors, 2 X female and DC connectors, 2 X DC power supply 2way distributors, 20X LED seamless connectors, 4 X 3825 2pin LED with pigtails Connector, 6 X 3528 2-pin LED light with jumper connector, 20 X set of screw fixing clips, 20 X self-adhesive light bar mounting clip.
- Note: When the waterproof LED light strip is connected with these LED light strip connectors, the silicone on the surface of the welding area must be peeled off.
- 2-pin 8mm LED connector supports 0-4A current and 0-24V voltage input, and the heat resistance rating is -20~100 degrees.
- 100% satisfaction guarantee: GOOCHAN connector kits are sold with a 30-day money-back guarantee. If you have any questions about this product, please feel free to contact us. We will solve the problem for you as soon as possible after receiving the information.
Check StockQsc ISA750 450W 8 Ohms Power Amplifier - New
- Rear panel gain controls for tamper resistance.
- 2-dB detents allow for quick and repeatable settings..
- XLR and detachable Euro-style input connectors.
- DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply).
- Independent defeatable clip limiters for reduced distortion.
- Front panel LED indicators include power, signal, and clip.
Check StockPlaylearn 300 Piece Straws Builders Construction Building Toy with Wheels - with Special Colored Connectors
- Set includes 300 pieces, + 4 large & 4 medium wheels. Create amazing models using the flexible straws, connectors and clips!.
- Special colored connectors not available in other sets, Helps develop and stimulate children’s imagination and construction skills whilst having fun!.
- Includes sturdy storage box with easy-clip lid and carry handle for handy storage..
Check StockCable Matters 100-Pack Cat 6 Pass Through RJ45 Connectors (Cat 6 Ends / Cat6 Connector / RJ45 Modular Plugs/Ethernet Plugs/Network Connector) for Solid or Stranded UTP Ethernet Cable
- Cat 6 RJ45 connector terminates unshielded twisted pair cable for making a custom-length Cat 6 Ethernet cable.
- Supports 23-26 AWG round or flat stranded wire with an outside diameter up to 5.4 mm.
- Crimp style Cat6 pass-through connectors terminate solid or stranded cable with a three point staggered contact to provide a secure connection.
- Simply feed the wires through the openings in the pass thru RJ45 connectors and crimp the connector for a faster termination with less effort.
- Category 6 performance rated for a Gigabit Ethernet channel compliant network.
- Backwards compatible with Cat 5e stranded or solid cable.
- Gold-plated contacts on 8P8C network connectors provide superior transmission and resist corrosion for a Cat6 cable.
- Cost effective 100-pack of Cat6 connectors provides enough connectors for a large project or multiple small jobs.
- Construct multiple patch cables in the perfect length for router, patch panel, or workstation applications with this crimp connector.
- Cat 6 crimp connectors are compatible with Cable Matters RJ45 Strain Relief Boots to protect the clip from accidental damage and bolster the integrity of the cable.
- Convenient jar storage container protects and stores the Cat6 RJ45 modular connectors until your next project.
Check StockPlaylearn LARGE 800 Piece Straws Builders Construction Building Toy - Giant Pack with Special Connectors
- Includes 800 pieces. Create amazing models using the flexible straws, connectors and clips!.
- Special connectors not available in other sets, Helps develop and stimulate childrens imagination and construction skills whilst having fun!.
- Includes sturdy storage box with easy-clip lid and carry handle for handy storage Giant Set – Don’t run out of pieces Straws 20 cm in length 7mm wide.
Check StockSkyTech SKY-3301 Fireplace-remotes-and-thermostats, Blower Control, Grey
- The battery powered R.F. transmitter and receiver give wireless remote control to a gas fireplace.
- Thermostat feature operates the fireplace whenever the room temperature swings 1 °f, 2 °f, or 3 °f a.
- Battery powered receiver with learn function, Snap-On wall plate, and 18 inch wires with connectors.
- Includes - transmitter remote, receiver box, wall plate, wall clip, wires with connectors, batteries.
- Transmitter operates (2) 1.5V aaa batteries.
- receiver operates 4 (aa) batteries. Partial plastic cover flips to cover buttons so settings aren't accidentally adjusted.
Check Stock