Top Clock Mechanism Kit

4 Pieces Quartz DIY Wall Clock Movement Mechanism Battery Operated Clock Motor Kit with 6 Sets of Hands (0.5 Inch/ 13 mm, Black, Red)

  • Abundant package: there are 4 clock movements mechanism, 4 sets of accessories, 6 sets of short clock hands with different styles and length in the package, you are able to choose various styles according to your needs, you can also change or make your own clocks with different styles of clock frame.
  • Proper dimension: the total length of the shaft is approximately 13 mm/ 0.5 inch, and the thread length is approximately 6 mm/ 0.24 inch, the clock movement mechanism is suitable for clock panels with a thickness of 1 - 3 mm/ 0.04 - 0.12 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit.
  • Work well: powered by AA batteries, the quartz DIY wall clock mobile mechanism has nice precision and equipped with sweeping motion, which can provide the watchmaker with accuracy and reliability, will not produce annoying ticking sound, moreover, will provide you with a quiet environment.
  • Durable material: the clock hands are made of quality aluminum, which are lightweight and corrosion resistant, they are so strong and durable enough that they can be applied for a long time, providing you with a comfortable as well as quality usage experience and decorative effect.
Check Stock

Silent Quartz DIY Wall Clock Movement Non-Ticking Repair Parts Replacement Kit Including 4 Pairs Hour Hands and Minute Hands 2 Second Hands

  • ⏰Long spindle clock movement: wall clock mechanism replacement movement parts with long shaft.
  • ⏰CLOCK HANDS KIT - Includes 4 pieces of minute hands and 4 pieces of hour hands, 2 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • ⏰Clock Movement Wide Application: suit for repair and replacement your clock, pretty good for framless 3D wall clock.
  • ⏰CLOCK MECHANISM SIZE -Total shaft length is 16 mm (0.63 inches), thread length 8mm (0.315 inches), suit for 3 - 6 mm thickness clock panel.
  • ⏰RANGE OF USE - perfect for clock replacement, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Check Stock

EMOON High Torque Clock Movement Mechanism with 11 Inch Long Spade Hands, Quartz Clock Motor Kit for Custom Repair Clock, Total Shaft Length 7/8 in (Black)

  • Clock mechanism size: Total shaft length: 7/8 in, threaded length: 1/2 in, fit clock dials from 1/8 to 3/8 in thick, repair the old clock, making you smile of the memories your old clock gives you.
  • Decorative long hands: With 2 different styles and length for your options, style1: size from the center of the hole to the tip, hour hand is approx: 8 in, minute hand: 11 1/8 in, style2: hour hand is approx: 5 in, minute hand: 6 1/4 in.
  • Packaged with care: Comes as a clock movement with 2 pack long hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping.
  • Time-keeping and high torque step movement: features High precision and high torque clock mechanism, which ensures watchmaker's accuracy and dependability.
  • step motion with a little ticking sound, powered by a AA battery.
  • Keep Time in Style: With EMOON clock hands and mechanism combo, you too can be a clock maker.
  • perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project.
Check Stock

7 Pcs Clock Movement Mechanism Clock Hands High Torque Long Shaft Clock Movement Replacement with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • Compatible Mechanism: Good for repairing, replacing or making a clock by yourself. Repair Hands Clock Motor movement can match to diverse clocks,such....
  • Decorative Clock Hands: Movement Hands Clock Motor suit for DIY clock , other clock creations.
  • get to pick out the hands that look best with your....
  • Total Shaft Length: 13 mm ( 0.51 inches), thread length: 6 mm (0.24 inches), suitable for 1-3 mm (0.04 - 0.12 inches) thickness clock panel..
  • Package included:1 x Quartz clock movement+1 x Second close nut+1 x Minute hand+1 x Hour hand+1 X Plastic washer+1 X Brass washer+1 X Brass nut.
  • Wide Application: Quartz Repair Mechanism Kit fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially....
Check Stock

5 Pieces DIY Quartz Clock Movement Mechanism Repair Parts Replacement Battery Operated Clock Motor Kits with 7 Different Pairs of Hands for DIY Clock Repairment (0.7 Inch)

  • Quantity package: this battery clock replacement mechanism set comes with 5 quartz clock movements, 7 pairs of clock hands, 5 gaskets and 5 hang hooks, and the enough quantity to use and replace, provides a variety of styles to choose from, which can be applied for different styles of clock frames, clock replacement or making your own customized clock project.
  • Size information: the total length of the shaft is about 18 mm/ 0.7 inch, while the thread length measures approximately 11 mm/ 0.43 inch, which is suitable for clock panels with a thickness of 4 - 7 mm/ 0.16 - 0.28 inch, and the clock hands fit for a diameter of 25 - 35 cm clock surface, please check the size before installing with this clock accessories kit.
  • Practical and durable: the clock movement mechanism is powered by AA batteries (not included), and the quartz DIY wall clock mobile mechanism has nice precision and is equipped with sweeping motion, which can provide the watchmaker with reliability and keep quiet when you are reading or sleeping.
  • Reliable material: these clock hands are made of quality aluminum, come in 4 vivid colors, and offer you a good opportunity for you to DIY your clock, lightweight and corrosion resistant, durable and practical so that they can be applied for a ....
Check Stock

4 Pieces Long Shaft Clock Movements Clock Hands Mechanism High Torque Mechanism with 5 Different Pairs of DIY Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 4 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit....
  • Size details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion,....
  • Wide application: these clock repair replacement parts are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and....
  • 5 Different styles of hands: this clock mechanism replacement set comes with 5 pairs of clock hands in different styles and length for your options,....
Check Stock

Katfort Clock Hands and Motor Kit, 3 Pieces Clock Mechanism Replacement, DIY Quartz Clock Mechanism Kit with 7 Pairs of Hands(20mm/0.79inch)

  • Size: The total shaft length is about 20mm/0.79" and the thread length is about 13mm/0.51". Clock movement repair kit is suitable for clock dials with a thickness of 9 - 13mm / 0.35 - 0.5"..
  • Accurate Time and Quiet Motor: Clock parts kit provides extreme accuracy and reliability. It is equipped with 6168s silent sweep second movement, no ticks, which will provide you with a quiet environment..
  • 7 Different Styles of Hands: This clock replacement mechanism comes with 7 pairs of different pointer and length. It's perfect for repairing clocks, clock replacement or making your own customized clock project..
  • Wide Application: These quartz replacement clock motor can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for craft clock, quartz wall clock and so on..
  • Note: When you install this clock diy kit, please keep the hour hand and minute hand parallel, and not tighten the brass hex nut too tight..
Check Stock

2 Pieces High Torque Clock Movement Mechanism with 24 Inch Clock Long Spade Wooden Clock Hands Replacement Kit Mechanism for DIY Wall Clock Repair Parts Replacement

  • Package information: you will get 2 pieces of quartz clock movements (15 mm), 2 pieces of gasket tools, 2 pieces of metal hooks and 2 types of walnut....
  • Product material: our clock movement replacement kit is quality.
  • The clock hand is made of walnut wood, which is wear-resistant and scratch-resistant,....
  • Size of the kit: the high-torque long shaft clock movement is approx. 15mm/ 0.59 inch, and the thickness of the panel cannot exceed 12 mm/ 0.47inch.
  • Eye-catching design: the replacement clock movement kit is chic but practical.
  • The clock hand has a retro look and the movement is simple, nicely....
  • Accurate and quiet: replacement quartz clock movement is featured with high precision clock mechanism, really accurate and dependable, and it is....
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock

8 Pieces Long Shaft Clock Movement Mechanism Quartz Clock Movement with 8 Different Pairs of DIY Clock Hands Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 8 pieces of high torque long shaft clock movements with 16 different pairs of hands.
  • These replacement parts suit well to different styles of clock frame, which are nice for repairing, replacing or making a clock by yourself.
  • Size details: the total shaft length is approx. 13 mm/ 0.51 inches, and the thread length is approx. 5 mm/ 0.2 inches.
  • Jump second movement is suitable for 1 - 4 mm/ 0.04 - 0.17 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers high accuracy and dependability, and they are equipped with sweeping motion but without ticking, providing you with a quiet environment.
  • Wide application: these clock repair replacement parts fit well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and also suit to be applied as DIY quartz wall clock replacement movement parts.
  • 16 Different styles of hands: this clock mechanism replacement set comes with 16 pairs of clock hands in different styles and length for your options, making them nice for clock creations and repairs while providing a decorative effect.
Check Stock

VANGOLD Movement for Clock Repair Kit , Wall Clock Movement Mechanisms Battery Powered Clock Kit for DIY Clock Replacement(Without Clock Hands)

  • Warranty: If the product has any problems with the clock mechanism, you can get a free replacement WITHOUT a return.
  • Note: The produces the 12888 series clock kits with different models, please compare the detail dimensions between your old one and this one before order..
  • Size: Total shaft length is 18mm (0.71"), thread length is 6.5mm (0.26").
  • and the shaft can drive long clock hands (10mm to 450mm). (This clock movement cannot install the second hand).
  • Usage: This high torque clock parts kit is suitable for 1-4mm (0.04"-0.16")thickness clock dial..
  • What You Get: The wall clock kit comes with metal hook and a small bag, which you can keep for other usage.(Without clock hands).
Check Stock

Youngtown 12888 Sweep Silent Clock Movement Mechanism with 2 Sets Small Hands 13.5mm (17/32 inch) Shaft Length 5.5mm (7/32 inch) Thread Length.

  • Package : come with specially designed box convenient to carry and protect all from scratching, bending, and other damage while shipping..
  • Clock mechanism size: total shaft length is 13.5 mm (37/64 inch), thread length is 5.5 mm (9/32 inch).
  • Sweep silent movement, suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel..
  • Clock hands kit: package includes 1 Metal hook,2 pieces of minute hands,2 pieces of hour hands, 2 second hand ,1 second cap and mounting hardware kits, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame. clock,etc.INSTRUCTIONS - Included along with the movements..
  • Accurate Time-keeping & Quiet Motor: features Youngtown 12888 clock mechanism, which offers watchmaker's accuracy and dependability.
  • equipped with sweeping motion, no ticking.
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent..
Check Stock