Top Clock Movement Kit

Katfort Clock Hands and Motor Kit, 3 Pieces Clock Mechanism Replacement, DIY Quartz Clock Mechanism Kit with 7 Pairs of Hands(20mm/0.79inch)

  • Size: The total shaft length is about 20mm/0.79" and the thread length is about 13mm/0.51". Clock movement repair kit is suitable for clock dials with a thickness of 9 - 13mm / 0.35 - 0.5"..
  • Accurate Time and Quiet Motor: Clock parts kit provides extreme accuracy and reliability. It is equipped with 6168s silent sweep second movement, no ticks, which will provide you with a quiet environment..
  • 7 Different Styles of Hands: This clock replacement mechanism comes with 7 pairs of different pointer and length. It's perfect for repairing clocks, clock replacement or making your own customized clock project..
  • Wide Application: These quartz replacement clock motor can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for craft clock, quartz wall clock and so on..
  • Note: When you install this clock diy kit, please keep the hour hand and minute hand parallel, and not tighten the brass hex nut too tight..
Check Stock

Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 4 Sets Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 23 mm (29/32 inch), thread length is 12 mm (15/32 inch)..
  • High Torque "I" Shaft Clock Movement: suitable for 4 - 8 mm (5/ 32 - 5/16 inch) thickness clock panel..
Check Stock

DIY Quartz Wall Clock Movement Mechanism Battery Operated 1/2 Inch Shaft Length, 12Hour Clock Movement Kit

  • 【Size】the total shaft length is 12.7 mm/ 0.5 inch, and the thread length is approx. 6.4 mm/ 0.25 inch, the clock movement mechanism thickness is 15mm/ 0.59 inch, it is very easy to install this short shaft clock movement kit..
  • 【Clock design 】design of the clock hands is simple and fashionable which the color does not fade, the silent clock mechanism replacement provides accuracy and reliability..
  • 【Quality Material】the quartz clock movement is made of ABS plastic material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect..
  • 【Package Includes】you will get 1 piece quartz clock mechanism with 1 set of accessories,1 Set clock hands..
  • 【Scenario Application】product have passed CE certification, this clock movement replacement parts can be applied in office, classroom, bedroom, living room, restaurant, library and other occasions, and also suitable for cross-stitch, craft clocks, frameless wall clocks, quartz wall clock to use..
Check Stock

Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable for 1-3 mm ( 3/64 - 7/64 inch ) thickness clock panel..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Silent Quartz DIY Wall Clock Movement Non-Ticking Repair Parts Replacement Kit Including 4 Pairs Hour Hands and Minute Hands 2 Second Hands

  • ⏰Long spindle clock movement: wall clock mechanism replacement movement parts with long shaft.
  • ⏰CLOCK HANDS KIT - Includes 4 pieces of minute hands and 4 pieces of hour hands, 2 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • ⏰Clock Movement Wide Application: suit for repair and replacement your clock, pretty good for framless 3D wall clock.
  • ⏰CLOCK MECHANISM SIZE -Total shaft length is 16 mm (0.63 inches), thread length 8mm (0.315 inches), suit for 3 - 6 mm thickness clock panel.
  • ⏰RANGE OF USE - perfect for clock replacement, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Check Stock

Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

12888 High Torque Quartz Clock Movement Replacement Parts with 350 mm / 13.78 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Center of hole hand size: hour hand is approx. 174 mm (6.85 inch).
  • Minute hand is approx. 350 mm (13.78 inch).
  • Second caps is approx. 7 mm (0.28 inch)..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 1/2 in Max Dial Thickness, 9/10 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keepingmotor:Size- total shaft length is 23 mm (9/ 10 inches), thread length is 15.4mm (3/ 5 inches).
  • suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches)thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, a....
Check Stock

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 3/10 in Max Dial Thickness, 4/5 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping motor:Size-total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inches).
  • suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and....
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock

WXLAA Quartz Clock Movement with Hands for Mechanism Clock Repair Replacement Noctilucence Shaft Length 12mm (9/20 Inch) Thread Length 5mm(1/5 Inch)#2

  • 【COMPLETE KIT】:High torque shaft clock with metal hook,perfect for repairing, replacing or making a clock,applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.
  • 【CLOCK MECHANISM SIZE】 : total shaft length is approx. 12 mm (9/20" inches), thread length is 5 mm (1/5" inches), suitable for 1- 2mm (1/ 25 - 2/25 inches) thickness clock panel.
  • 【DECORATIVE CLOCK HANDS】: we offer a variety of different options, perfect for your clock creations.
  • get to pick out the style and length of the hands that look best with your clock at no additional charge,making your own customized clock.
  • 【ACCURATE TIME-KEEPING】: high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • equipped with sweeping motion, no ticking.
  • powered by a AA battery (not included package).
  • 【EASY TO INSTALL】: when you install this clock movement kit, please keep the hour hand and minute hand parallel,We offers high quality service within 24 hours, so please feel free to contact US，You will receive --1*Clock movement，1*Second hand，1*Minute hand，1*Hour hand，1*Brass washer，1*Brass nut.
Check Stock

TIKROUND Youngtown 12888 High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Gold 1 Set)

  • Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long.
  • The minute hand is about 305 mm/ 12 inches in length..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock