Top Clock Movement

High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 3/10 in Max Dial Thickness, 4/5 in Total Length

  • ✔️ High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping motor:Size-total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inches).
  • suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • ✔️Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6.9 inches long.
  • The minute hand is about 230 mm/ 9.1 inches in length..
  • ✔️ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements..
  • ✔️ Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and....
Check Stock

Gatuida 1Pc Clock Mechanism Replacement Quartz DIY Wall Clock Movement Clock Repair Parts Replacement

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment..
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel..
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set..
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying..
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock

Mudder Long Spindle Quartz Clock Mechanism, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Black)

  • Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, black color allow you to get the time even if you stand far away.
  • Wide application: you are enable to use it to repair, replace or make a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Total shaft length: 23 mm (9/ 10 inches), thread length: 15.4 mm (3/ 5 inches).
  • Simple style clock movement: it can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
  • Note: this clock doesn't contain hook, they can't hang directly.
  • If the handle is too long, you can snip them as you want according to the size of the clock panel.
Check Stock

Mudder Long Spindle Quartz Clock Mechanism, 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length (Red)

  • Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away.
  • Wide application: you are enable to use it to repair, replace or make a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel.
  • Total shaft length: 23 mm (9/ 10 inches), thread length: 15.4 mm (3/ 5 inches).
  • Simple style clock movement: it can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.
  • Note: this clock doesn't contain hook, they can't hang directly.
  • If the handle is too long, you can snip them as you want according to the size of the clock panel.
Check Stock

Quartz Pendulum Trigger Clock Movement Chime Westminster Melody Mechanism Clock Kit with 3 Pairs of Hands

  • What you get: in our pendulum clock movement set, you will receive 3 pairs of hands, pendulum, trigger clock movement, chime music box, mounting hardware and instructions, meet your different needs and replacement.
  • Pendulum clock movement size: total shaft length is 17 mm/ 0.67 inch, the thread length is 9.7 mm/ 0.38 inches.
  • Jump second movement, which is suitable for 2-6 mm/ 0.08-0.24 inches thickness clock panel.
  • Hole center to the tip hand size: the hour hands measure approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inch and 82 mm/ 3.2 inch, the minute hands measure approx. 101 mm/ 3.98 inch, 92 mm/ 3.6 inch and 117 mm/ 4.6 inch, and 2 second hand are approx. 100 mm/ 3.9 inch, 1 second cap is approx. 7 mm/ 0.28 inch.
  • Melody effect: the chiming pendulum movement plays the Westminster melody on the hour, automatically silences the chimes after 9 o'clock pm until 6 o'clock am.
  • Practical tools for you: these pendulum trigger clock movement replacement parts are practical for you to design and make your own pendulum clock, help you to replace and change a different look.
  • Please notice that the hands are made of aluminum, don't install them with too much pressure or they will be bent.
Check Stock

Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 4 Sets Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 23 mm (29/32 inch), thread length is 12 mm (15/32 inch)..
  • High Torque "I" Shaft Clock Movement: suitable for 4 - 8 mm (5/ 32 - 5/16 inch) thickness clock panel..
Check Stock

FMTAD Large Peacock Wall Clock Non-Ticking Silent ,3D Creative Luxury Peacock Clock Mid Century Decorative Big Peacock Wall Clocks for Living Room Bedroom Dining Room Decor

  • 【Luxury Peacock Clock】Our peacock wall clock made of metal and 3D resin peacock, plus sparkling acrylic crystal.Exquisite peacock wall clock, it is not only a clock to record your happy time, but also a beautiful wall clock decor, both practical and beautiful..
  • 【Peacock Clock Size】:This big peacock wall clock whole size is:70*70cm/ 28*28inch.Please check the size before buying..
  • 【Silent Movement】:The silent peacock clock movement provides you a noiseless environment to sleep and work. Besides, the high quality clock movement also guarantees the smooth movement of clock hands, thus ensuring better time accuracy and longer working life..
  • 【Peacock Clock Material】:The luxuary peacock wall clocks are made of iron branches, handmade shiny acrylic rhinestones, resin peacock,durable metal with high temperature lacquer,metal dial, metal clock pointer .No deformation, no fading, easy to operate, easy to read..
  • 【Decorative Wall Clock】This peacock clock is a great decorative wall clock for walls, it can be displayed as a porch, farmhouse.Also suitable for kitchen, dining room, living room, bedroom, hallway, bar, dining room, cafe, shop clock, office wall clock, etc..
Check Stock

2 Pieces High Torque Clock Movement Mechanism with 24 Inch Clock Long Spade Wooden Clock Hands Replacement Kit Mechanism for DIY Wall Clock Repair Parts Replacement

  • Package information: you will get 2 pieces of quartz clock movements (15 mm), 2 pieces of gasket tools, 2 pieces of metal hooks and 2 types of walnut....
  • Product material: our clock movement replacement kit is quality.
  • The clock hand is made of walnut wood, which is wear-resistant and scratch-resistant,....
  • Size of the kit: the high-torque long shaft clock movement is approx. 15mm/ 0.59 inch, and the thickness of the panel cannot exceed 12 mm/ 0.47inch.
  • Eye-catching design: the replacement clock movement kit is chic but practical.
  • The clock hand has a retro look and the movement is simple, nicely....
  • Accurate and quiet: replacement quartz clock movement is featured with high precision clock mechanism, really accurate and dependable, and it is....
Check Stock

6Pcs Quartz Clock Mechanism Kit Wall Clock Mechanisms Mattery Powered Replacement Clock Movement Parts Motor Replacement DIY Repair Parts with 6 Set Hands No Battery

  • 6pcs Clock Mechanisms & Two Size: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel.....
  • Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a....
  • Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 6 clock movements in....
  • Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless....
  • Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing.
  • they are made of aluminum, and please....
Check Stock

DIY Quartz Wall Clock Movement Mechanism Battery Operated 1/2 Inch Shaft Length, 12Hour Clock Movement Kit

  • 【Size】the total shaft length is 12.7 mm/ 0.5 inch, and the thread length is approx. 6.4 mm/ 0.25 inch, the clock movement mechanism thickness is 15mm/ 0.59 inch, it is very easy to install this short shaft clock movement kit..
  • 【Clock design 】design of the clock hands is simple and fashionable which the color does not fade, the silent clock mechanism replacement provides accuracy and reliability..
  • 【Quality Material】the quartz clock movement is made of ABS plastic material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect..
  • 【Package Includes】you will get 1 piece quartz clock mechanism with 1 set of accessories,1 Set clock hands..
  • 【Scenario Application】product have passed CE certification, this clock movement replacement parts can be applied in office, classroom, bedroom, living room, restaurant, library and other occasions, and also suitable for cross-stitch, craft clocks, frameless wall clocks, quartz wall clock to use..
Check Stock

2Pcs Quartz Clock Mechanism Kit Wall Clock Mechanisms Mattery Powered Replacement Clock Movement Parts Motor Replacement DIY Repair Parts with 5 Set Hands No Battery

  • Two-Clock Mechanisms Size: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel. Long Total....
  • Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a....
  • Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 2 clock movements in....
  • Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless....
  • Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing.
  • they are made of aluminum, and please....
Check Stock

2Pcs Clock Mechanism, Quartz Clock Movement Replacement, Clock Kit Motor Replacement Mute Design DIY Repair Clock Parts with 5 Set Clock Hands (No Battery)

  • 2pcs Clock Mechanisms Size: total shaft length 16 mm (0.63 in). Thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel.These clock movements can be used for almost any home wall clock..
  • Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a silent environment. All of your requirements are met by a simple and elegant design..
  • Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 2 clock movements, 5 pairs of hours and minutes hands, 5 seconds hands and second cap, easy to install, and many options in one set..
  • Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, suitable for repairing, replacing, or making a clock, and also suitable for various styles of the clock frame (no battery).
  • Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing.
Check Stock