Top Clothing Patch

Offended You are A Fuck I Dont Give Yoda Patch - 4x1.5 inch. Embroidered Iron on Patch

  • ...our iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on the patch. You'll damage the patch if you do. The i....
Check Stock

No Guns Just Guts Thin Silver Line Patch for Correctional Officers - 3.5x2.4 inch. Embroidered Iron on Patch

  • ...our iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on the patch. You'll damage the patch if you do. The i....
Check Stock

JeepTails Howling Wolf Moon Silhouette Tail lamp Light Covers Compatible with Jeep Wrangler JL (Non-LED) - Black - Set of 2

  • ...our iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on the patch. You'll damage the patch if you do. The i....
Check Stock

Freedom Ain't Free in Memory of Our Fallen Boot Rifle Helmet Patch - 3.5x3.5 inch. Embroidered Iron on Patch

  • ...our iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on the patch. You'll damage the patch if you do. The i....
Check Stock

Yalulu 10pcs Twill Denim Iron on Patch Fabric Embroidery Patches for Iron on Jeans Shirt Elbow Appliques Pants Knee Clothes Stickers Clothing Badges (Red)

  • Material: made of denim and twill cloth, durable material to use, not easy to be worn out, each patch measures 12.5 x 9.5 cm/ 4.9 x 3.7 inches (L x W)..
  • You can cut out the pattern you want. Patch for your clothes provide extra fun..
  • Easy to use, washable,Place the patch where it is needed, then iron the patch, it can be completed quickly, you can also fix the patch with a needle. The heat seal glue can be sewn or ironed on any fabric , Each patch is available Cleaned and drier..
  • Patches irons can be used to cover small holes and stains on clothes. You can also iron on your own ideas such as bags, dresses, curtains, etc. for your own DIY creations or sew on your favorite fabrics, chic and fashionable..
  • Widly used,suitable for shirt, rucksacks, jeans, clothing, hats, clothing, T-shirts, decorative crafts, sewing, etc., to repair worn out or worn holes in clothing and extend the life of your favorite clothing..
Check Stock

Patch Adhesive Iron On Adhesive Patches Double Sided Patches Fabrics Adhesive Sheets Cut to Fit Freestyle Patch Adhesive Kit for Badge Fabric Patches Sewing (6 Pieces)

  • Material: made of denim and twill cloth, durable material to use, not easy to be worn out, each patch measures 12.5 x 9.5 cm/ 4.9 x 3.7 inches (L x W)..
  • You can cut out the pattern you want. Patch for your clothes provide extra fun..
  • Easy to use, washable,Place the patch where it is needed, then iron the patch, it can be completed quickly, you can also fix the patch with a needle. The heat seal glue can be sewn or ironed on any fabric , Each patch is available Cleaned and drier..
  • Patches irons can be used to cover small holes and stains on clothes. You can also iron on your own ideas such as bags, dresses, curtains, etc. for your own DIY creations or sew on your favorite fabrics, chic and fashionable..
  • Widly used,suitable for shirt, rucksacks, jeans, clothing, hats, clothing, T-shirts, decorative crafts, sewing, etc., to repair worn out or worn holes in clothing and extend the life of your favorite clothing..
Check Stock

FoDuoDuo I Aim to Misbehave - Firefly/Serenity Inspired License Plate Frame Aluminum Black Car Cover Tag Holder with 2 Holes 12 x 6 Inch, one color (frame-118)

  • ...our iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leather and ruin it. Do not remove the plastic iron on backing when sewing on the patch. You'll damage the patch if you do. The i....
Check Stock

Captain Patch - 4x1.5 inch - Embroidered Iron on Patch

  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit.....
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to....
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing....
  • This is a top quality embroidered patch for Clothing. We use 100% Rayon Synthetic thread for maximum durability and color preservation. The patch is....
Check Stock

Woijkfkasvxz Deplorable and Proud American Flag Men s T-Shirt with Round Collar and Long Sleeves Black

  • Proud Deplorable American Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit.....
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to....
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing....
  • This is a top quality embroidered patch for Clothing. We use 100% Rayon Synthetic thread for maximum durability and color preservation. The patch is....
Check Stock

FANMATS NFL Minnesota Vikings Die Cut Color Automobile Emblem, 4' x 3'

  • A Permanent Patch 3 Inch Diameter With Permanet Adhesive and will stick to any Clothing Surface. Iron On or Sew Patch Works On Jeans Shirts Caps Denim Cotton, Canvas, Linen Or Poly Clothing (some leathers but not all).
  • A common household iron is all that is required ,set at the wool setting for 15 seconds. It can be sewn on as well..
  • Each patch has a black 1/16" border around the edge of it,.
  • Sublimation imprint process, the patch is good for 100 + washings..
Check Stock

Survivor: Life in the SAS

  • Reflective American Flag Patch Size: 2 inch x 3 inch, Reflective Patch Size: 2 inch x 3.5 inch..
  • They are Reflective Patch with Hook and Loop Patch, Repeated use..
  • Reflective Patch with Hook and Loop Patch, Can be Used as Your Jacket Patches, Tactical Hat Patches Flag, Tactical Backpack Patches Flag, Outdoor Clothing Patch Flag, This Reflective Patch with Hook and Loop Patch..
  • Tactical Flag Patch is Exquisite, and it is Easy to Disassemble and Clean..
  • American Flag Patch Size and Reflective Patch Size are Different.
Check Stock

Jaanu Mt Jaw Ri Sasr Thari

  • Reflective American Flag Patch Size: 2 inch x 3 inch, Reflective Patch Size: 2 inch x 3.5 inch..
  • They are Reflective Patch with Hook and Loop Patch, Repeated use..
  • Reflective Patch with Hook and Loop Patch, Can be Used as Your Jacket Patches, Tactical Hat Patches Flag, Tactical Backpack Patches Flag, Outdoor Clothing Patch Flag, This Reflective Patch with Hook and Loop Patch..
  • Tactical Flag Patch is Exquisite, and it is Easy to Disassemble and Clean..
  • American Flag Patch Size and Reflective Patch Size are Different.
Check Stock