Top Clutch Booster Assembly

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

CLEO Gy6 150cc high performance clutch set，include clutch Assembly and Variator Assembly with 842 belt fit for GY6 125cc And 150cc 4-Stroke Engine Scooter ATV Taotao Roketa Sunl

  • ★Save your choice time: A high performance clutch kit that meets your driveline needs eliminates the time and effort required to find the right....
  • ★You will get: 1*clutch Assembly 1*Variator Assembly 1*Gates 842 belt, You only need to confirm the corresponding engine or model. These three parts....
  • ★This is a high-performance clutch, please pay attention to the parameters：19 Splines Inside The Clutch Drum/Bell；OD of Drum: 136mm；ID of....
  • ★The Belt is made of high heat-resistant and high-strength materials：Belt key parameter 842x20, Premium belt provides longer durability for high....
  • ★Variator Assembly for gy6 150cc：Fit GY6 125cc&150cc 152QMI 157QMJ Engine Roller Size：18*14mm ； Variator Size:Diameter 108mm.
Check Stock

AUTEX AC A/C Compressor Clutch Coil Assembly Kit 977013E200 57190 977013E200RU

  • Replacement for : Compatible with Sorento V6 3.5L 2003 2004 2005 2006 AC A/C Compressor Clutch Assembly Kit.
  • Cross Reference Part Number of AC Compressor Clutch Assembly Kit: 977013E200, 977013E200RU, 58190, 57190, 20-21500, 57190, 58190, 97701-3E200,....
  • Replacement part, tested prior to leaving the factory.
  • 12 months warranty (Not including repair fee).
  • Note that: it is recommended to clean the refrigeration system of ac compressor at the first step, and then replace the clutch off the ac compressor..
Check Stock

CLEO Gy6 150cc clutch set，include clutch Assembly and Variator Assembly with 842 belt, fit for GY6 125cc And 150cc 4-Stroke Engine Scooter ATV Taotao Roketa Sunl

  • ★Save your choice time: A clutch kit that meets your driveline needs eliminates the time and effort required to find the right model (and the risk of buying the wrong model)..
  • ★You will get: 1*clutch Assembly 1*Variator Assembly 1* 842 belt, You only need to confirm the corresponding engine or model. These three parts are applicable in sets..
  • ★High quality clutch:19 Splines Inside The Clutch Drum/Bell OD of Drum: 136mm；ID of Drum: 125mm ID of spline area: 14.4mm；Fits GY6 125cc and 150cc 4-Stroke Engine.
  • ★The Belt is made of high heat-resistant and high-strength materials：Belt key parameter 842x20x30, Premium belt provides longer durability for applications..
  • ★Variator Assembly for gy6 150cc： Variator Size:Diameter 108mm.
  • Variator Pin OD 24mm ID 15mm；Fit GY6 125cc&150cc 152QMI 157QMJ Engine Roller Size：18*14mm.
Check Stock

Traxxas 6878 Slipper Clutch (Complete)

  • Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models.
  • Pre-assembled with 54-T, 32-pitch spur gear installed.
  • Accepts #6893X optional bearing adapter for high-power applications.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

OTC 5015A Truck Clutch and Flywheel Handler

  • OTC's Truck Clutch & Flywheel Handler turns clutch replacement from a back breaker to a simple one person job.
  • Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 150 lbs.
  • Swivel casters and a 9 inch to 37 inch lifting range provide supreme manueverability during installation - allowing precise alignment of the clutch assembly to the back of the engine.
  • Includes a 2 inch splined shaft with a 1-1/4 inch pilot to aid in alignment.
  • high-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

AlveyTech Complete Clutch Assembly 50cc 4 Stroke GY6 QMB139 Engines

  • A complete clutch assembly for the Baja Retro 50 (RT50) or Baja Sun City (SC50S - VIN number LWGT) scooters..
  • Complete Clutch Set for 50cc 4 Stroke engine vehicles..
  • Will fit most 50cc chinese scooters as well..
  • This pulley assembly, (aka driver pulley or variator) comes complete as shown in the photos..
Check Stock

Stens 255-114 Electric PTO Clutch, Silver

  • Specs: ID: 1". Height: 3 1/8". Pulley dia: 6 5/16". Belt width: 1/2" Or 5/8". Pigtail: Included. Rotation direction: Counter clockwise. Designed for rugged use. For Proper Ordering, Reference Warner or Ogura part numbers stamped on clutch. To prevent premature clutch failure, Follow the instruction sheet included with the clutch. Made by: an OEM supplier.
Check Stock

P SeekPro Clutch for STIHL 034 036 MS340 MS360 MS360C Chainsaw Replacement Parts#1125 160 2006

  • Stihl Clutch High Quality And Non-original Replacement Parts,Please Compare It With Your Original Parts Before Ordering It..
  • Clutch Fits STIHL MS360 036 MS340 034 TS400 Chainsaw.
  • Match Up Exactly With Original Equipment In Perfect Fitness, Easy To Install..
  • Stihl Clutch Replace Part No.1125 160 2006,Package Includes 1 x Clutch Stihl MS360 Assembly.
  • Free And Fast Shipping To Us By Epacket Arrival Within 7-15 Business Days..
Check Stock

Dual Clutch Transmission Remover Installer Tool Compatible with Ford Focus, DCT Dual Clutch Transmission Reinstall Reset Tool Set for Reuse DCT F1FZ-7B546-B, Clutch Transmission Tools Accessories

  • ...emover installer tool is made of heavy-duty steel, which is corrosion-resistant and high in hardness. Perfectly compatible with Ford Focus DCT dual-clutch transmission DPS6..
  • 【Professional Dual Clutch Transmission Tool】Reuse the removed/previously installed dual-clutch assembly. It resprings/re-trips the springs on the clutch so that the user can reinstall it..
  • 【Durable Dual Clutch Transmission Tool】The surface of the dual-clutch transmission remover installer tool is specially phosphated, which not only prevents rust, but also has a longer service life. With this tool, you will not need to purchase any new DCT clutch components..
  • 【How to Use the Dual Clutch Transmission Tool】Install the special tool and press the input shaft tightly. After the threaded bar is in contact with the input shaft, it rotates 20 times..
  • 【All-In-One DCT Tool Set】The dual-clutch transmission tool is equipped with a toolbox, which is very convenient for product organization and storage. If you have any questions about the product, our technical team will help you solve the problem within 24 ....
Check Stock

Poulan 501628301 Sprocket Clutch Drum

  • OEM Part Number: 501628301 Replaces Previous OEM Part Numbers: 530057905.
  • Fits Poulan Models: P3314 (Type 1), P3314 (Type 2), P3314WS (Type 1), P3416 (Type 2), P3816 (Type 1), P3818, P3818AV (Type 1), P4018, P4018, P4018AV, P4018AV, P4018AVBH, P4018WM (Type 1), P4018WT.
  • When the engine gets up to a certain speed the clutch will engage the Drum Assembly and the chain will start to spin..
  • The sprocket which is part of the Drum Assembly, is the part that drives the chain. The 3/8 indicates the pitch of the chain that is needed for the saw..
Check Stock

necaces Clutch Assembly 17 Teeth Fit Auto 50cc 70cc 90cc 110cc 125cc Dirt Bike Engine taotao

  • Fit 50cc 110cc 125cc semi automatic engine.
  • Includes everything you need to replace the old clutch..
  • Brand 100% new clutch assembly with accessories.
Check Stock