Top Clutch Removal Tools

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

  • 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
  • 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
  • Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
  • 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
  • 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
  • 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.
Check Stock

USG Sheetrock 'The Dimpler' Drywall Screw Setter Bit - Reversible with Clutch

  • #2 Phillips bit sinks and sets screws to perfect finish depth..
  • Automatic clutch release eliminates tear-out of screws in drywall and stripping of screw heads and bits..
  • Replaceable Phillips bit tip can be changed when worn. No need to replace the entire tool..
  • Reversible with turn-to-lock feature for screw removal..
  • Made by USG Sheetrock - the Leading Brand in Drywall Hand Tools.
Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

  • CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
  • HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
  • GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
  • each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
  • EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
  • SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.
Check Stock

DPTOOL Dual Clutch Transmission DSG Remover Installer Tool Kit Compatible with Ford DPS6 Dual Clutch Reinstall Reset Tool

  • Removal Install Dual Clutch: Special designed to disassembly and install dry transmission. Disassemble the double clutch fixing snap ring, install and remove the three claws, turn the threaded bar 20 turns after it makes contact with the input shaft and pull out the double clutch.
  • Reinstall Reset Dual Clutch: this tool could resprings/re-trips the springs on the clutch so that you can Disassembly lock and installing an unlock.
  • Applicable: compatible with ford dual clutch transmission DPS6. vehicle include: Fiesta 2011-2019.
  • 12 Months Warranty: we offer 12 months warranty, we will refund or replace if the product have any quality problem.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.
Check Stock

Xislet Belt Changing Removal Tools Kit Compatible with Polaris RZR 900 S 1000 XP Come with Clutch Cover Separate Tool Set Combo Package

  • The clutch tool for polaris rzr is a must-have for separating the cover screws, it's flexible so easy to get the cover screws in or out in that tight....
  • The RZR belt changing tool makes changing your belt easier, and speed up change belts, saving the time of Polaris RZR rider.
  • RZR clutch cover removal tool with a flexible shaft and no-slip grip, which can be used within 90 degrees bending range to work on the clutch screw....
  • Netted Anti Skid Design - This Belt changing tool has an ergonomic handle for a comfortable grip making it easy for RZR owners to change a belt.
  • Razor belt removal tool made of solid aluminum alloy CNC Machined - de-burring and polishing - accurate control every process by Xislet.
Check Stock

2-in-1 Lock Nut Wrench Clutch Lock Nut Tool 20mm/24mm clutch lock nut spanner socket for Crf 600rr 450r 250l

  • STURDY SOLID MATERIAL -- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
  • DESIGNED FOR LOCK SPANNER KIT -- A special and perfect replace grom clutch removal tool for : Replace special tool: # 07716-0020100,....
  • IMPORTANT DATA FOR YOU TO CHECK -- Large End Inner Diameter: 24mm / 0.94 inch.
  • Large End Outer Diameter: 30mm / 1.18 inch.
  • COMES WITH 4 PIN LOCK NUT SPANNER -- 4-pin socket clutch nut tool, each end has 4 pegs.
  • One side is 20mm inner diameter and another side is 24mm inner....
  • FITMENT -- This clutch nut tool can be used for 14mm clutch lock nut on: crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994,....
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

Kuryakyn 6240 Premium ISO Handlebar Grips for Throttle and Clutch: Universal Fit for Motorcycles with 1\ Diameter Bars, Chrome, 1 Pair

  • Grip placement dampens handlebar vibration and provides a soft, non-slip surface.
  • Features unique recessions between grip pads to allow air flow.
  • Unique removable end caps allow use with stock air reservoir type handlebars.
  • Includes (1) chrome throttle side grip assembly, (1) chrome clutch side grip assembly, (1) spacer material, (2) tube adhesive.
  • Suggested tools (not included): razor blade, sandpaper, electrical tape, hack saw or utility knife, non-permanent marker.
  • Universal fit compatible with 1" diameter handlebars and overall length 5 3/4" x 1 5/8" diameter.
  • May require the removal of ribs on OEM (original equipment manufacturer) throttle sleeves.
Check Stock

BEADNOVA 100PCS Butterfly Clutch Pin Backs Locking for Enamel Pin Backs Lapel Pin Backs (Silver, 100 pcs)

  • PACK INCLUDES: 100pcs clutch backs in silver color. Clutch back is 11.5mm in diameter, 5mm in height..
  • STURDY AND LIGHT MATERIAL: Butterfly clutch pin backs are made of copper. No tools required, these butterfly clutch with spring fastener allow you to put on and remove it easily, handy and convenient for use..
  • GOOD PRICE FOR REPLACEMENT: Pack of 100pcs butterfly clutch, enough for replacement to your lost or torn label pins, service bars, name tags etc. This great value pack is also a good supply for diy jewelry and craft making..
  • STORAGE BOX: Come with plastic storage box, you can store butterfly clutch pin keepers neatly..
  • WIDE APPLICATION: Butterfly clutch tie tacks pin backs can be applied to tie tacks, badge, service bars, name tag, toy pins, jewelry making, DIY craft projects, etc..
Check Stock

Kuryakyn 6340 Premium ISO Handlebar Grips for Throttle and Clutch: Universal Fit for Motorcycles with 1' Diameter Bars, Gloss Black, 1 Pair

  • Grip placement dampens handlebar vibration and provides a soft, non-slip surface.
  • Features unique recessions between grip pads to allow air flow.
  • Unique removable end caps allow use with stock air reservoir type handlebars.
  • Includes (1) gloss black throttle side grip assembly, (1) gloss black clutch side grip assembly, (1) spacer material, (2) tube adhesive.
  • Suggested tools (not included): razor blade, sandpaper, electrical tape, hack saw or utility knife, non-permanent marker.
  • Universal fit compatible with 1" diameter handlebars and overall length 5 3/4" x 1 5/8" diameter.
  • May require the removal of ribs on OEM (original equipment manufacturer) throttle sleeves.
Check Stock