Top Cnc Lathe Shaft

PSI Woodworking PKTRIM8 Pen Kit Barrel Trimmer 8mm Shaft with 3/4\ Steel Cutter Head & Allen Wrench

  • Includes 8mm Pilot Shaft, 3/4" Steel Cutter Head, and Allen Wrench.
  • Square the end of your pen blanks and pen tubes prior to turning on the lathe and pen kit assembly.
  • Shaft acts as a pilot for the cutting head and helps remove excess glue from the tube.
  • Shaft will fit into a drill chuck or lathe chuck.
  • Barrel trimming and squaring is an essential step in penturning projects to ensure a proper fit between the pen kit hardware parts and the turned blank.
Check Stock

ALTBET MT2 Live Center 2MT 60 Degree Morse Taper Precision 0.000197'' CNC Long Spindle Lathe Tool

  • Made of high quality tool steel, high hardness, durable in use.
  • Features excellent dustproof and liquid proof seal, long service life..
  • High accuracy, high rigidity and high wear resistance..
  • Professional manufacturing for good working performance.
  • Suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock

150Grains Archery Field Points Various OD 100/125/150/200 Grains Field Points Stainless Steel Archery Target Bullet Point Sharp Targethead Screw in Broadheads (1 Dozen 12 PCS) (5/16″150 Grains)

  • Both 100 / 125 /150/200 Grain weights available,availble in multiple O.D. to match the most common shaft sizes ces.
  • High precision CNC lathe, weight tolerance +/- 0.5 grains.
  • Every 12 points is packed with a beautiful metal box.
  • Various Size Different Weight Meets Different Arrows / Bows, including the Compound Bows Recurve Bows and Crossbow.
  • Consistent Weight and Precision Machined to Make Sure Arrow Flying Straightly and Target Exactly Great for practice and target use.
Check Stock

Teak Tuning CNC Polyurethane Fingerboard Bearing Wheels, White - Set of 4 Wheels - Durable Material with a Hard Durometer

  • CNC LATHE WHEELS || Set of four CNC lathe fingerboard bearing wheels in White.
  • DURABLE || Each wheel features a durable, but smooth surface, and a durometer of 100D.
  • SMOOTH RIDING || Each wheel contains a single metal bearing that enables the wheel to spin fast and ride smooth.
  • COMPATIBILITY || Compatible with all fingerboard trucks including Blackriver Trucks, Y-Trucks, Dynamic Trucks, and Tech Deck Trucks.
  • FOR RIDERS OF ALL SKILL LEVELS || Perfect for riders of all skill levels. Includes a free Teak Tuning sticker. Choking Hazard: Small Parts. Not suitable for children under the age of 14.
Check Stock

Pine Derby Car BSA Speed Wheels and Axles Kit | Professionally Lathed | Pinewood Car Wheels

  • PROFESSIONALLY LATHED BSA WHEELS - Wheels lathed on state of the art CNC lathe. Tread surface trued to center of wheel bore. Inner tread edge cut with a radius square to center of wheel bore..
  • MATCHED MOLD NUMBERS - All wheels have matched mold numbers ensuring that the bore diameter and other wheel measurements are identical, maximizing performance. Wheels are ready to race as is, but can be polished up for maximum performance..
  • SPEED AXLES - Not your standard BSA out of the pinewood car kit axles. Accurate, round shaft to improve performance..
  • LESS WORK FOR YOU - No burrs and crimp marks, eliminating tedious work. Also creates a faster more consistent derby car. Axles are ready to race as is, but can be polished for greater performance..
  • MADE IN THE USA - Maximum Velocity has proudly serving the Pinewood Derby community for 20+ years!! We are here to help!!.
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Simple Woodturning Tools Full Size Set of 6 Carbide Tipped Wood Turning Lathe Tools with Carbide Inserts screws and Torx Star Wrench PLUS Comfortable Foam Grip 17 Interchangeable Handle USA Made

  • Six Carbide Tipped, USA Made Wood Turning Tools, PLUS a well balanced, Foam Grip, 17" Long Interchangeable Lathe Tool Handle.
  • Includes our Simple Swan Neck Hollower, Specifically designed to reach areas inside hollow form vessels inaccessible with straight shaft tools..
  • Tools measure 12" length with 2.5" handle tang. T15 & T20 Torx star tip wrenches are included..
  • American made in Ramsey, Minnesota by Harrison Specialties, a family owned and operated CNC Machine shop.
  • Tools are easily changed by loosening the allan set screws in the handle..
Check Stock

0.040\ x 24\ x 24\

  • Product type: High quality aluminum solid round rod lathe bar stock assorted.
  • Material: High hardness aluminum, corrosion-resistant, sturdy and durable.
  • Diameter: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm.
  • Feature: The surface is smooth, easy to shape, no cracks formed.
  • Application: Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars.
Check Stock

MT2 Live Center,MT2 High Accuracy Triple Bearing Live Center for Metal Lathe Turning,Live Revolving Center High Precision Medium Turning Tools Parts for Lathe Tailstock Machine

  • Made of high quality metal, high hardness, durable in use..
  • Features excellent dustproof and liquid proof seal, long service life..
  • High accuracy, high rigidity and high wear resistance..
  • Professional manufacturing for good working performance..
  • Suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

Milling Machine Linear Scale, 170mm High Accuracy Linear Encoder for Milling Lathe Machine

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock