Top Cnc Milling Machine Tool

E-outstanding 2pcs 20 Teeth 5mm Bore Timing Pulley GT2 Aluminium Alloy Synchronous Wheel for 6mm Width Belt 3D Printer CNC Mechanical Drive Silver

  • Excellent processing, high finish and long service life..
  • It works closely with the timing belt for smooth transition and more stable driving. It is suitable for linear motion and positioning..
  • It is made of high-quality 7075 aviation aluminum, with high hardness, anodized surface treatment, effective waterproof and rust proof..
  • Side screw mounting hole: M4, 20 teeth, to minimize the risk of belt slipping..
  • Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool, lathe, hobbing machine or other mechanical transmission occasions..
Check Stock

Imdinnogo 2Kit GT2 Synchronous Pulley Wheel 20&60 Teeth 5mm Bore Aluminum Timing Pulley Belt Closed Timing Belt Length 7.87inch Width 6mm for 3D Printer (60T-5mm-6)

  • Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions..
  • Works closely with the synchronous belt for more smoothly transition and more stable drive. Suitable for linear motion and positioning..
  • Inner Bore Diameter: 5mm. Screw Mounting Hole: M4..
  • Material: high quality 7075 aviation aluminum, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
  • Package includes: 2 kt closed belt with pully wheel..
Check Stock

SainSmart Genmitsu 7Pcs ER11 Spring Collet Set for CNC Engraving Milling Lathe Tool 1.0mm-7.0mm

  • ➤7Pcs ER11 Collet Set Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm).
  • ➤Perfect for CNC milling lathe tool and work-holding engraving machine. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

Weiler 21115 Power Tube Brush, Double Stem/Double Spiral, 1\

  • Ideal for aggressive cleaning and deburring on on steel, armored steel, cast iron, ductile iron and tool steel parts.
  • Features four stem wires and a double spiral of straight wire fill material.
  • 1/4" stem diameter for use on CNC/milling/automatic machine, drill, drill press, corded/cordless hand drill or cordless screwdriver.
  • Specifications: 1" Power Tube Brush, .0104" Steel Wire Fill, 2-1/2" Brush Length.
  • Country of Origin: United States of America.
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

End Mill Bit Sets, 12pcs Tungsten Carbide CNC Rotary Bits PCB Milling Bits CNC Router Bits Engraving Bits Cone Cutter Drilling Hole Tool for PCB Mould, Plastic, Fiber, Carbon, Wood 0.25mm~5.5mm

  • Material: Made of quality Tungsten Solid Carbide, These CNC router bits have high flexural strength and wear resistance, sharp and durable, with good milling, cutting performance..
  • Superior precision: Flutes design provide good chip-carrying capacity, enhancing the tool’s ability to remove material. And with sharp cutting edge, improve working efficiency greatly, no glitches or scrap left.
  • Set of 12 size: 0.25mm, 0.3mm, 0.4mm, 0.5mm, 1.3mm, 1.4mm, 1.7mm, 1.9mm, 2.5mm, 3.55mm, 4mm, 5.5mm. It can meet your needs greatly..
  • Widely application: These CNC router bits fit for PCB board, SMT, CNC, Mold, engraving, plastic fiber, carbon fiber, cooper, stainless steel, printed circuit board, other precision environmentally friendly sheet, CNC machine tool,etc..
  • Service guarantee: We promise provide you good customer service, if there is any dissatisfaction, you can just contact us, we will refund you or send you new replacement within 24 hours..
Check Stock

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

  • Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
  • For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ...ngraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock