Top Cnc Part Machining

Peter-Putter ((2) Black)

  • EXCEPTIONAL QUALITY – Crafted with high-grade 303 stainless steel billets by a veteran master machinist to the highest quality standards..
  • CNC PRECISION MILLED – A total of nine manufacturing operations are required to create a beautiful custom putter to the highest tolerances only attainable from CNC precision machining..
  • 25 YEARS OF RESEARCH – Feedback from golf professionals, metals experts, CNC machinists, and golfers at all skill levels have gone into creating a superb putter that gives you your best performance..
  • HEADCOVER – Included to keep your putter protected when not in use..
  • MADE IN USA – Putters crafted 100% from design to production in America’s heartland of Nebraska..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

TOPOINTARCHERY Unison Aluminum CNC Milling Recurve Bow Riser 25 Targeting Takedown Recurve Bow Riser Right Handed ILF Device for Archery Bow Targeting Smoke Right Handed

  • Ship From The USA Warehouse Receive The Bow Riser Immediately.
  • CNC Machining Center High accuracy Machined Anodized Aluminium Alloy 6061-T6,Wooden Grip Same Color With The Riser.
  • ILF Limb alignment system,fit for all ILF limbs..
  • Special alignment system,prevent the screw loosening design,could fit the Limbs degree angle,protect the limbs contacting part, for better....
  • Important Point:Bow Riser Only,String And Limbs Are Not Included In The Package.
Check Stock

(2 Pack) Round Acetal Copolymer Rods - Standard Tolerance 1-Inch Diameter and 12-Inch Length Opaque Black Acetal Copolymer Rods Meets ASTM D6778 Specifications Perfect for Non-Marring Fixtures

  • ... parts that require durability and wear resistance like in non-marring fixtures, electrical insulators, and bushings.
  • VERSATILE AND DEPENDABLE MATERIAL - Acetal copolymer has applications in a wide variety of industries and niche interests. It is used in string instruments as a dulcimer bridge/nut. It's even used in machining applications as a washer and an arbor material. There are also mandrels made of acetals. Other applications include buffer spacers/pins,.
  • HIGH MOISTURE RESISTANCE - Among different types of acetals, acetal copolymer has the highest moisture, humidity, and high-temperature resistance. It doesn't easily deteriorate or wear in wet environments. And because it absorbs minimal moisture, acetal copolymer retains its physical properties in different environments..
  • ZERO CENTERLINE POROSITY - Centerline or core porosity occurs when the acetal's outer layer solidifies faster resulting in a loss of volume in the rod's core. This is a big issue in acetal homopolymers. Acetal copolymers naturally have lower centerline porosity but with an excellent manufacturing process, it is possible to achieve zero centerline porosity, preventing outgassing and water penetration..
  • HIGHLY MACHINABLE - Aside from machining on a lathe, acetal copolymers are easy....
Check Stock

ER-32 Hex Collet Block Chuck, Workholding Collets Tool Holder for CNC Lathe Engraving Machine, High Strength and Hardness, Sturdy and Durable

  • Through hole allows the machining of long parts..
  • Used for quick setup on CNC machine tools..
  • Made of tool steel material, through hardening treatment..
  • Professional manufacturing, high machining accuracy..
Check Stock

ThinkTop Mountain Bike Pedals Platform for MTB BMX, 3 Bearing High Strength Carbon Fiber Tube Sealed Lubricate, 9/16 Bicycle Cycling Road Bike Aluminum Flat Pedals

  • The brand design and processing - the use of five-axis NC machining equipment, each bearing error in 0.005 mm size precision, 6061 aluminum alloy body, lighter, more durable. Central carbon fiber tube, low density, high strength.CNC machining:forming machine processing, fashion more beautiful..
  • 3 bearings - withstand heavy force and minimize friction, saving you up to 30% in physical exertion.
  • create an amazing cycling experience.Bearings are sealed to keep dust out.
  • ensure the best tread and simplify maintenance..
  • Screw thread design is not more easy to loose,more fitting and firm.To protect the riding more secure., Perfect for Upgrading or Replacing Old Pedals..
  • All fittings are made of exquisite CNC production and processing, let the pedals look more smooth and beautiful..
  • Use - BMX, Cruisers Bicycle, Kids' Bikes, Road Bicycles, MTB Bicycle, Mountain Bicycles, Junior Bicycle, CITY bicycle..
Check Stock

Bell SS-370 Side-Saddle Golf Putter + Winn Two-Piece Grip (Right, 45)

  • EXCEPTIONAL QUALITY – Crafted with high-grade 303 stainless steel billets by a veteran master machinist to the highest quality standards..
  • CNC PRECISION MILLED – A total of nine manufacturing operations are required to create a beautiful custom putter to the highest tolerances only attainable from CNC precision machining..
  • 25 YEARS OF RESEARCH – Feedback from golf professionals, metals experts, CNC machinists, and golfers at all skill levels have gone into creating a superb putter that gives you your best performance..
  • HEADCOVER – Included to keep your putter protected when not in use..
  • MADE IN USA – Putters crafted 100% from design to production in America’s heartland of Nebraska..
Check Stock

Bell SS-400 Side-Saddle Golf Putter + Winn Two-Piece Grip (Right, 46)

  • EXCEPTIONAL QUALITY – Crafted with high-grade 303 stainless steel billets by a veteran master machinist to the highest quality standards..
  • CNC PRECISION MILLED – A total of nine manufacturing operations are required to create a beautiful custom putter to the highest tolerances only attainable from CNC precision machining..
  • 25 YEARS OF RESEARCH – Feedback from golf professionals, metals experts, CNC machinists, and golfers at all skill levels have gone into creating a superb putter that gives you your best performance..
  • HEADCOVER – Included to keep your putter protected when not in use..
  • MADE IN USA – Putters crafted 100% from design to production in America’s heartland of Nebraska..
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

WOOSTAR Timing Camshaft Gear Kit Replacement for GY6 125cc 150cc 152QMI 157QMJ Engine ATV 4 Wheeler Quad Scooter Moped

  • ★【REPLACEMENT FOR】GY6 125cc 150cc 152QMI 157QMJ Engine ATV 4 Wheeler Quad Scooter Moped.
  • ★【EASY TO INSTALL】CNC machining, stable quality. Use this camshaft when upgrading cylinder and head to get the most performance..
  • ★【NOTE】Please verify model number and size prior to ordering to ensure this is the correct part.
  • ★【WOOSTAR CUSTOMER SERVICE】Always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock