Top Cnc Plasma Cutters

PZRT 10pcs M6 x 20mm Hammer Head Bolt T Screw, 10pcs M6 Hexagon Flange nut Set, Carbon Steel Nickel Plated, for 3030 Series European Standard 8mm T-Slot Aluminum

  • 3030 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • M6 Hexagon Slip Locking Flange Nuts made from high quality carbon steel,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life.
  • Flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer,the serrations help in avoiding vibration of nut and increase the holding power of nut.
  • High Quality Carbon steel M6 x 20mm T Screw Bolt Screws Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.
  • T-shaped screws are used for aluminum profile design, suitable for standard 8mm T-slot 30 European standard aluminum profiles.
Check Stock

IPT 60 Consumables Kit 0.9mm for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 10pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get one (1) piece plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

IPT-60 Torch Swirl Ring IVF0601 for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Plasma Cutter 5pcs

  • Plasma swirl ring ref code: 60028 / IVF0601.
  • Plasma swirl ring can fit Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch.
  • You can get Five (5) pieces plasma cutting swirl ring with this price.
  • These palsma cutting consumables are aftermarket parts, not Origianl.
Check Stock

Plasma Swirl Ring IVF0601 for Everlast PowerPlasma 50S/60S PowerPro 205S/256S Cutter IPT-60 Torch 1pc

  • 70pcs Plasma cutting consumables kit equivalent to Everlast PowerPlasma 50S / 60S plasma cutters and PowerPro 205S / 256S plasma cutters IPT-60 / PT-60 torch consumables, aftermarket replacement, not original.
  • IVB1048 / 52582 Plasma electrode x 35pcs.
  • IVU10668-11 / 51313P.11 Plasma tip / nozzle x 35pcs, Flat contact tip, diameter 0.043in / 1.1mm.
Check Stock

STV Motorsports CNC Plasma Table - Made in the USA (SparX510-5x10)

  • HIGH END TECHNOLOGY: The STV CNC Plasma Cutting Tables offer the best technology and high-quality components.
  • USED for MANY APPLICATIONS: Our CNC Plasma Cutting Machines works for a wide range of applications, using a Windows – based software (software package and license included0.
  • CONSISTENCY and SPEED: The STV CNC SPARX Series Plasma Tables are using high accuracy stepper motors for speed, control and smooth operation.
  • it will offer you excellent consistency and speed.
  • VERY DURABLE and MADE in the USA: Our tables are built tough and designed to easily handle 3/4” steel plates (but they can handle more).
  • LIFETIME SUPPORT PACKAGE: 1 Year Warranty and Lifetime Customer Support, Setup and Installation Support, Tutorials and Videos, How-to’s Manuals.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Thermal Dynamics 9-8213 Replacement Start Cartridge

  • Suitable for all Cut Master series plasma cutters.
  • Unique design allows the pilot arc to start without moving consumable parts.
Check Stock

Lotos NLCUP05 5 Pieces of Consumables Cups for Brown Plasma Cutters LT5000D CT520D

  • This package includes 5 pieces schedule cups.
  • This item is designed specifically for BROWN Color Lotos plasma cutters or combos:BROWN Color LT5000D, BROWN Color CT520D and their associate plasma cutter torches..
  • Not compatible with RED Color LT5000D and RED Color CT520D.
Check Stock

3/8' AR500 Steel Shooting Targets 3' 4' 5' 6' Gong Set

  • ...to minimize glare for the shooter. Each Dragon gong target can also easily be repainted after the original paint is knocked off..
  • Laser Cut: Dragon Targets are your go to metal shooting targets for the range made with a Mitsubishi CNC laser cutter for maximum precision. We use a laser cut because the heat from other cutters (such as plasma) causes the strength of other steel range targets to diminish prematurely..
  • Hear Every Hit: When our ar500 steel targets are hit, they make a loud ‘dinging’ noise that lets the shooter know they are on point during shooting practice. This eliminates the need to walk downrange to check for strikes and allows for more rounds to be shot in one session..
  • Safety First: All safety protocols and guidelines should be strictly adhered to when target shooting. Once you switch from paper to steel, you will never want to go back! Why shoot a target, when you can shoot a Dragon?.
Check Stock

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2\ Clean Cut, CUT50D

  • ... plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself..
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors..
Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

  • Comes With Blow Back iPTM-100 CNC machine plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • Up to 1 1/8″ clean cut with CNC (edge start).
  • Pierce up to 5/8″-3/4″ with auto THC.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ✅ 【High-Frequency Cut】Professional Plasma Cutter,high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-....
Check Stock