Top Cnc Single head Bending Machine

Leebein Electric Spin Scrubber, Cordless Cleaning Brush with 8 Replaceable Brush Heads, Adjustable Extension Handle, 2 Speeds & Remote Control,Power Cleaning Brush for Bathroom Floor Tile Car (Black)

  • ... polish and wax your car with those heads..
  • 【Length and Angle Adjustable】Leebein electric scrubber can be adjusted from 14.5-51.2in, 4 adjustable angles (90°, 120°,150, 180°). So you can use it to clean those hard-to-reach areas freely and easily without kneeling or bending over. No more back-breaking work and no single dirt left behind..
  • 【2 Ways to Control】Thanks to the extra remote controller on the long handle, you can now adjust the speed or turn the machine on/off without bending or kneeling. it’s a small change to save your knees and back. Besides, you can also control the machine with the controller on the short handle..
  • 【One Charge to Clean the Whole House】Adapted upgraded 2000mAh*2 battery and USB-C fast charge tech, Leebein electric bathtub scrubber fully charges in 2.5 hours which lasts 60-90 min, far enough to clean your entire house. You can check the remaining battery by the LED light on the machine..
Check Stock

MroMax M8-1.25x20mm T Slot Bolts Carbon Steel Drop-in Stud Sliding Screw Bolt Metric Hammer Head Bolt for European Standard 40 Series Aluminum Extrusions Silver 20Pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • High quality T head screws for aluminium extrusions, suitable for 45mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

Heyiarbeit 35x100mm Plastic Cable Wire Carrier Drag Chain 1M R100 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 35mm x 100mm/1.38" X 3.94"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock

OrangeA Linear Rail Guide 2X SBR20-1800mm Linear Guideway Rail + 4 SBR20UU Block for 20mm Fully suppoeted Shaft Rod

  • Complete Linear Rail Kits: This linear rail set includes 2pcs 86.5 in / 2200 mm long SBR20 rail shafts and 4pcs SBR20UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It’s no need for maintenance..
  • Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machine..
Check Stock

2Pcs SBR20 Linear Rail Length 1300mm 51.2 inch with 4Pcs SBR20UU Square Type Carriage Bearing Blocks Fully Supported Linear Rail

  • SBR20-1300mm linear rail set includes 2 pieces of 1300 mm/51.2 inch long SBR20 rail shafts and 4 SBR20UU blocks. Sliding blocks to be used....
  • CNC parts linear rails are made of bearing steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Surface chrome plating....
  • Industry-standard SBR block with high-precision linear bearing inside. The adjustment handle can adjust the tightness of the slider, standardized....
  • Perfect combination of main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR....
  • The linear guide rail is widely used in the automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding....
Check Stock

LOYALHEARTDY 9 Teeth Crank Milling Machine Knee Handle Mill Part Swivel Handle for Bridgeport

  • CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation instructions. You can enjoy the delight of engraving plastics, soft aluminum, acrylics, PVC, PCB, and many more. This product does not include a laser head and can be purchased by yourself..
  • Large Working Area: The effective engraving area of this engraving machine is 11.8(X) x 7.1(Y) x 1.8(Z) inches. Three refined axes are designed to achieve plane engraving. With the knob, the axes can be moved manually, which facilitates the carving tool settings. The driving units consist of stainless steel screw rods. It uses double copper nuts to clear round trip errors..
  • Excellent Motor: This CNC engraving machine is equipped with three stepper motors(1.3A.
  • 0.25 Nm torque) and 775 DC(12-24V) 24V spindle motors with a rotational speed of 10000 r/min. And the engraver supports Windows 7, Windows 8, Windows 10, Linux, macOS system, and other software to directly import JPG, BMP, PNG, DXF format files for engraving..
  • Upgraded Control Board: The integrated GRBL control features full functionality and stability. And the advantages ....
Check Stock

AmmoGarand M1 Garand Lock Screw Wrench Cross and Single Slot Combo Head

  • Dual Flat and Cross Tip Head for Garand use only.
  • Made in USA by AmmoGarand, 4-1/2 Long by 5/8 Wide.
  • CNC machined RL Steel Head with bevel ends for easy start.
  • Fits GI Single Slot and Poppet style M1 Garand Gas Screws (can NOT be used on any other type of rifle or commercial adjustable screws).
Check Stock

Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting Electric Driven Hydraulic Pump Pedal Solenoid Valve Control equipments 2-70 Mpa

  • Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valve.
  • The pump can be used for a variety of hydraulic equipments..
  • Working mode: Pedal Solenoid valve Control.
  • Punching machine, bending machine, Jack split hydraulic products.
  • If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

OrangeA Linear Rail 2 Set SBR20-1000mm 2 Linear Rail Guide and 4SBR20UU Bearing Block Linear Slide Guide

  • Complete Linear Rail Kits: This linear rail set includes 2pcs 39.4 in / 1000 mm long SBR20 rail shafts and 4pcs SBR20UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable..
  • Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
  • Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for large-scale transmission equipment, including industrial robots, cracker machines..
Check Stock