Top Cng Cylinder Pipe tube

Harris 45KPOP Brazing Kit, 1225-1370 F, w/1.75 oz Flux

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-11 soft solders up to 3-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ...osion resistance and long service life.They can protect your original exhaust for a long time and completely cover and protect your original exhaust tailpipe..
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is coated with special high-temperature coating, which has super corrosion resistance and exquisite craftsmanship, which can help you car The exhaust port has a smooth appearance. The exhaust tail pipe is suitable for pipes with a diameter of 48mm-60mm. Please measure the diameter of the pipe before purchasing..
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a wrench to fix the 3 screws to the appropriate position of the exhaust pipe,and then firmly fix it after installation Fix it to the exhaust pipe of the original car,it will not fall off,and replace or protect old parts perfectly and firmly.(Do not install this product on a car that has just been stopped or started to avoid burns).
  • ☻[Product function and design] Exhaust....
Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

  • Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
  • each 50lb. cylinder makes from 10-16 blocks of dry ice.
  • Dry ice production can be viewed through the transparent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder.
  • Lightweight body is never as cold as the dry ice, even when filled.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
  • Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
  • Read through Instruction Manual (PDF) under Technical Specification before installation.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to....
Check Stock

Kuryakyn 9931 Bluegrass Breather Catch Tank for Harley-Davidson Motorcycles, Chrome

  • Features banjo fittings and chrome tubes that route the vented gasses upward so gravity can keep any expelled oil droplets in the engine.
  • Helps in venting expelled oil from the cylinder heads.
  • It is recommend to vent the crankcase in open air by running the vent line up and out of sight beneath the tank.
  • Includes (1) Chrome Catch Tank Assembly, (1) Chrome - LIL Tank, (1) Chrome - LIL Tank Inlet Rib, (1) Rubber Gasket, (1) Vent Pipe, (1) Oil-Safe Sponge, (1) Hardware Kit.
  • Suggested for installation (not Included): allen wrenches.
  • Compatible with Harley-Davidson models: Using the Bluegrass Breather Kit.
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • ...utter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock

Goss KX-10MC Soldering Brazing Torch Kit for \MC\ Acetylene Tanks Includes GA-5L Ignitor Tip with Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-8L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "MC" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-8L soft solders up to 2-Inch and silver brazes up to 1-Inch.
Check Stock

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

  • EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
  • EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
  • EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
  • EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
  • EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
  • 【Quality Steel Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
  • 【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
  • 【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches....
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock